Misumi Linear Slide Insert for SAR: (Belt Drive) FTC Robotics
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Linear Slide Insert for Belt Drive, compatible with Misumi SAR linear and drawer slides, typically used in FTC Robotics
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 131
- Wydruki
- 0
- Wyświetlenia
- 1072
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Assembly & Rigging Tutorial Video:
This method works seamlessly with any of Misumi's Slides, including the dual-stage SAR 210-250 series and the three-stage SAR 310-350 series. This method also used GoBilda as a build platform, but will work with any REV, Tetrix, or AndyMark robotics sets as well. Today, I’ll be demonstrating with the Misumi SAR 330.
🛠 Required Hardware:
• Gobilda's Belt-Drive Upgrade Pack for 3210-0002-0004 Cable-Driven 4 Stage Viper-Slide Kit https://www.gobilda.com/belt-drive-upgrade-pack-for-cable-driven-4-stage-viper-slide-kit/
• M3/M4 locknuts
• 8mm countersunk M3 machine screws,
• 30mm M4 machine screw,
• Optional: m3 sleeve nut https://www.rvspaleis.nl/moeren/hulsmoeren/verzonken-binnenzeskant/9062-2-3_1
I also have an additional model for stringing up these slides with rope, if you need a different mounting position for your motor: https://www.printables.com/model/1063158-linear-slide-insert-for-misumi-sar-slides-string-d