1 / 5
Print in Place Stryker M1133 Medical Evacuation Vehicle — zdjęcie 1
1 / 5

Print in Place Stryker M1133 Medical Evacuation Vehicle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Print-in-Place Stryker APC with moving wheels

Ocena
5 / 5
Polubienia
46
Pobrania
296
Wydruki
2
Wyświetlenia
1255
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Print took almost 38hrs at .2mm layer height %15 infill using 297g of filament on my E5+, although it may take less depending how fast your machine is. I've uploaded 2 versions of this model, the model v2 doesn't have the part protruding out of the passenger side so it can be printed on either side. 

 

I printed it with supports touching build plate, it really only needs supports around the front part. Most of the angles are 45° so the rest shouldn't need too much support. I changed my minimum wall line width in cura to 0.1mm so it can pick up the detail I was hoping for. I used a brim so it wouldn't warp off the build plate, but it kinda caused it to fuse together so it's not as detailed on one side.

Tagi