Liczymy pasujące modele…
Designed in fusion 360. No supports or multicolor unit is needed. For single color printers add a pause at layer 11 or 12 for the raised text and border if you want a separate color. Print lying flat on build plate with raised text up.…
“HITCH” "GAS” “WATER” “TRAC” “GAS/WATER” “GUN” Dual Color Keychains
Simple replacement flag when offroading. Has 3 holes for zip ties. Print using TPU, preferably orange.
This is just a simple 1/10 scale off-road utility trailer. It has a trailing arm suspension, and is tested to be trail/off-road ready, and is sized around 1.9 1/10 crawler wheels. Print the frame and suspension components in PETG at least…
Ready to hit the dirt? This 3D model brings the classic VW Beetle into full monster truck mode – massive tires, exposed supercharger, bold exhaust pipes, and a powerful rear spoiler. A wild blend of retro charm and Mad Max vibes! Perfect…
Bolts into stock Traxxas TRX4 frame, obviously not a functional spare, makes it look more like a Jeep. I printed them in black PLA and they hold up fairly well.
6 inch round offroad light cover should fit most 6 inch round offroad lights
Decided to attempt to recreate Matt's Offroad Recovery's "World's Largest Offroad Wrecker" for an SCX24 chassis, and well, this is the result. Should be able to assemble using standard SCX24 screws. Could work on various chassis, but this…
RC SCALE EXPEDITION OFFROAD CAMPER I recommend following the Build Guide when assembling. The list of necessary hardware is in the Build Guide. Please contact me in case of questions or any confusion. If you like it, you can [buy me a…
print slightly warmer than usual for better strength, supports are needed
3D Printed OFFROAD RC chassis 1/10 scale RC BODY available HERE Stay tuned for exciting new projects on our Facebook group For any technical support please contact the following email : [email protected] The 3 main guide listed…
I designed this from the ground up. This case fits the Chipolo One. With the Find my Device Network Launching for android I've got a couple on the way for my bike and other stuff. I don't want to glue the thing onto stuff so this'll give…
Ich habe die Genehmigung von den Real Life Guys bekommen, um dieses Modell hochladen zu dürfen. Aufbau: Vom Originalmodell benötigen Sie das vordere und das hintere Teil der Karosserie (auf den Bildern zu sehen). Skalieren Sie diese auf…
Heres a tyre glue down clamp I designed. I had seen other designs, which were very popular but just to download the designs were quite expensive imo, however for me the biggest design flaw was that you were screwing into bare plastic,…
Car stand for 1/10th scale offroad rc cars. This car stand has a Yokomo branding. You also need six M3x10 screws and 6 nuts to screw the two halfs together.
Car stand for 1/10th scale offroad rc cars. This car stand has a Team Associated branding. You also need six M3x10 screws and 6 nuts to screw the two halfs together. The Team Associated letters must be printed out separately and in an…
Car stand for 1/10th scale offroad rc cars. You also need six M3x10 screws and 6 nuts to screw the two halfs together. At the top and bottom there are indentations to stick some foam rubber tape in. I used 10mm wide and 1mm thick foam…
I recommend following the Build Guide when assembling. The list of necessary hardware is in the Build Guide. Please contact me in case of questions or any confusion. Minimum print area: 250x120mm UPDATES: 2025/03/20 - added NBC.4…
Here is a set of printable windows for the fantastic NBC.3 trailer. https://www.printables.com/model/902228-nbc3-110-scale-offroad-camper-for-crawlers This contains a set of windows that will fit within the designed window frame of the…
This is just a simple 1/10 scale off-road utility trailer. It has a trailing arm suspension, and is tested to be trail/off-road ready, and is sized around 1.9 1/10 crawler wheels. Print the frame and suspension components in PETG at least…
This wheel has a 12mm hex nut that is 10mm from the edge, has 55mm space inside the wheel, counting the rim its 66mm, the wheel is 30mm wide, the rim should fit the tire tightly if printed well.
I wanted to have off-road rear bumper on my Landy Wagon but I also wanted to tow the trailer. So here is the result I mixed original hitch and original rear bumper. Original hitch is slightly higher to by aligned with the tubes on the…
Everything uses 5mm bolts to thread into the plastic For the auxbeam panel, print two for mounting. It uses the stamped metal backing plate on the panel itself. For the tablet mount grab this tablet mount and disassemble the vent mount.…
To mount the wheel you just need the screw that goes on to the compatible models and you are good to go, install the wheel into the position. Be aware that the original wpl/jjrc tires don't really fit ot these rims and that the little rim…
Ready to hit the dirt? This 3D model brings the classic VW Beetle into full monster truck mode – massive tires, exposed supercharger, bold exhaust pipes, and a powerful rear spoiler. A wild blend of retro charm and Mad Max vibes! Perfect…
RC SCALE EXPEDITION OFFROAD CAMPER I recommend following the Build Guide when assembling. The list of necessary hardware is in the Build Guide. Please contact me in case of questions or any confusion. 010_axle can be reinforced by…
Cover to use with key for off road vehicles. Intended for TPU filament. Kawasaki version and plain version included. Keyring hole might have to be centered for some keys. Print Settings Printer: Dremel Idea Builder Rafts: No Supports: No…
Significant Updates 2025 Aug 14 — New more grip track pads (experimental) 2025 Aug 17 — Added product pages for dual motor steering ESC and gearboxes, and more assembly instructions. 2025 Aug 21 — Stronger rear sprocket / final drive and…
Ich wollte schon lange mal eine G-Klasse selbst entwerfen. Das ist eine einfach Version mit Pendelachse vorne und hinten. Dafür werden einfach 2x Kugelschreiber Feder in der Mitte geteilt. Die Reifen werden wie üblich in TPU gedruckt.…
Mir hat das Model so sehr gut gefallen. Ich wollte aber noch ein paar Änderungen vornehmen die ich diese selbst schon in der jeweiligen Ausführung gefahren habe. Die Reifen müssen wieder in TPU gedruckt werden. Der Rest in PLA und wie in…
fischertechnik mud terrain tires | Fischertechnik Offroadreifen für Steckräder 23 mm → different types → 0.4 Nozzle → 0.2 mm Layer Height → 0% - 10% infill → side/bottom/top → layer 4 → TPU
Replacement for Wicked Extreme Offroad CAP5465-L38-6135 that is no longer in production. THIS IS NOT A PERFECT MATCH FOR THE OEM HUB CAP. The major dimensions are the same, but some of the details are not. Probably wouldn't notice if they…
If you have this offroad kit for model 5 by 3D Sets you can combine it with GRC lights for better look. With this bar the lights are slightly tilted downwards (2°) and hold at its place, use original short M2 screws. Don't use the metal…
A highly detailed 3D model inspired by an iconic 6x6 off-road beast. Perfect as a display piece, decoration, or to showcase your printing skills. 🧱 Recommended print settings: Material: PLA or PETG Layer height: 0.15 – 0.2 mm Infill: 15 –…
When doing some electrical work on my Jeep Wrangler JLU, I decided to install the Genesis Offroad Stock Battery Replacement Kit . While the kit is well thought out, it leaves several positive battery terminals exposed to accidental…
CF Moto 450 MT offroad footpegs insert Christmas gift for cfmoto 450mt community! Have fun! I printed it with PETG nozzle 0.8 layerheight 0,4 3 perimeters it is strong and durable you need m6 bolt washer and nylon nut
OVERVIEW This is a nearly fully 3D-printable 1:16 RC car built for real driving and exploration (or display, of course). It’s a weekend-scale, beginner-friendly project . No soldering or cutting. You print the parts (~70h), assemble them,…
This is a substitution hub cap for an offroad delta wheels. Printable may serve as a temporary cover. https://shop.delta4x4.com/en/marken/delta4x4/accessoires/8740/radkappe-sins-silber-18x8-20x9 PETG material, feels rigid and has some…
Bolts into stock Traxxas TRX4 frame, obviously not a functional spare, makes it look more like a Jeep. I printed them in black PLA and they hold up fairly well.
OVERVIEW This is a fully 3D-printable 1:45 car built as a display model or functional toy. It’s a beginner-friendly project . No cutting, no printing supports, no screws and hardware needed. You print the parts (~6h), assemble them in 10…
Simple Offroad car. Soething like a Range Rover The models have diffrent mesurments!
Sidewall Gluing Fixture: Modelled after Schumacher Splinter front tires, others like Fuzzbites should work. Instructions: Apply glue to fixture recess. Put tire face down in fixture. Rotate tire, do not let it sit and dry, spin it around…
6 inch round offroad light cover should fit most 6 inch round offroad lights
Screwed Husqvarna / KTM Oil Funnel for Offroad Models with air release for better oilflow Should fit on all KTM / Husqvarna / GASGAS Offroad & Supermoto models. Feel free to remix to lighten it up or add some features.
Screwed Yamaha Oil Funnel for Offroad Models with air release for better oilflow Should fit on all Yamaha Offroad models. The picture is the Husqvarna version but the Yamaha one is exactly the same but with other thread size and the…
Decided to attempt to recreate Matt's Offroad Recovery's "World's Largest Offroad Wrecker" for an SCX24 chassis, and well, this is the result. Should be able to assemble using standard SCX24 screws. Could work on various chassis, but this…
Pretty standard dimensions for 2.2 inch RC wheels. The 2wd fronts use 8mm x 3mm ball bearings. The rears and the 4wd fronts use the standard 12mm hex. I suggest PETG for strength, but it might work fine with PLA, I just haven't tried…
Pretty standard dimensions for 2.2 inch RC wheels. The 2wd fronts use 8mm x 3mm ball bearings. The rears and the 4wd fronts use the standard 12mm hex. I suggest PETG for strength, but it might work fine with PLA, I just haven't tried…
Pretty standard dimensions for 2.2 inch RC wheels. The 2wd fronts use 8mm x 3mm ball bearings. The rears and the 4wd fronts use the standard 12mm hex. I suggest PETG for strength, but it might work fine with PLA, I just haven't tried…
ADDON - This is ONLY the top bar with smaller sized holes to fit the RC10B74 and RC10B84 shock barrels. (16.5mm diameter). Download the rest of the files from the original creator.
tpu 50% infill 0.8 mm nozle (suggested) o.55 layer height (suggested)
tpu 50% infill 0.8 mm nozle (suggested) o.55 layer height (suggested)
simple offroad led light cover make for my amarok https://www.youtube.com/shorts/dRGOegiFglI Category: Parts
To celebrate the upcoming King of the Hammers 2017 and hopefully another podium sweep. I present the officially unofficial Spidertrax key tag. Pictured is full size and 75% with some keys and Benchy for scale. Legal The spider logo is a…
A Spidertrax logo cookie cutter I made to test test cookie cutter design. Print Settings Printer Brand: RepRap Printer: Prusa i3 Rafts: Doesn't Matter Supports: No Resolution: .25 Infill: 30 Notes: adjust to taste Legal The Spider logo is…
Remixed from https://www.thingiverse.com/thing:3753924 The reason for the screenshot from thingiverse is because i am moving all my designs from there.
Offroad style light for kid 12 volts car. Glue standard 5mm leds on the led ring and glue it inside the housing. You can apply aluminum tape on the inside of the housing to make it more reflective. Use 6mm (¼") screws to assemble the…
This is a more robust, reinforced, and adjusted version of the street light bracket for MBS Matrix II trucks. Allows mounting the T6 CREE LED style bike light to your truck hanger. This positions each light behind the hanger such that…
I printed mine in polycarbonate with 5mm wall thickness and 35% infill. I have not tested any other material.
Print the left and right sides by mirroring on the Y axis. You do need to cut out the body so that it fits but I believe that it is worth it. Want to buy me a coffee? : https://www.patreon.com/muxoid
Remix of https://www.thingiverse.com/thing:2938514 I extended the bottom edge to 7.5mm for a little more protection from mud and water, and made the grips on it extend out a little further from the original. This has a great feel in the…
Adaptor for smaller shocks - example you need to print from ludog's 1/8th 1/10th offroad RC shock stand : foot 2x side Print settings: Anything you like. I have used 0.8 nozzle with 0.4 layer height - Prusament PETG Supports: No
The E3D Buggy goes offroad. The big tires allow to climb at crazy angles. A rollcage is a must have for such an extreme vehicle. If the buggy got stuck, it can use it's Warn winch to get out of that situation. If somebody really wants to…
UPDATE jan, 1st 2024: I made a much better Shock Stand: You might want to try this one in stead: https://www.printables.com/model/694740-updated-18th-110th-offroad-rc-shock-stand *********************************** I went from 1/10th to…
I added the tow hitch to mount a remix of a offroad trailer from thingyverse by madizmo https://www.thingiverse.com/thing:2847515 that I added a horse box to, that I bought from cults. (More details about that on the trailer model.)
This is a remix from the offroad trailer from henke_99 on Thingyverse and a horse trailer from LULU3DBUILDER on cults. I put all together in tinkercad. I contacted the license owner on cults, and he agreed to change the license. I added…
A RC-car rim for WPL cars. It has slightly bigger hex size (6mm) so it fits better on the axle, depending on your printer settings it should still be a nice fit. Fits on original WPL tyres. This rim is slightly wider than original! Use…
I joined the the following tire and wheel to make 1 stl for 3d printing as one piece, perfect for Gaslands or other miniatures games. Jeep Wheel https://www.thingiverse.com/thing:2056923 Tire https://www.thingiverse.com/thing:2119923…
Rail for this trailer: https://www.thingiverse.com/thing:3543490
Designed to be comfortable for the user and printable on a sizeable FDM machine. Went through several engineering analysis on stress tests. Withstood more than three competitions worth of racing. Printed in CF Nylon and 75% infill. For…
🆕 Available on Etsy, from me, with free shipping These are 1:10 scale recovery boards for RC crawlers and other toys. I really made these for a fridge magnet but folks at Etsy loved it for the detail. I am sure the community here on…
UPDATE jan, 1st 2024: I made a much better Shock Stand: You might want to try this one in stead: https://www.printables.com/model/694740-updated-18th-110th-offroad-rc-shock-stand *********************************** I went from 1/10th to…
Nezbytné podpěry pod středem kola. Suitable for drifting, ideal for fun on ice. You can find other types of wheels and other models on my profile: https://www.printables.com/cs/@VojtechStraka_466782/models
Necessary supports under the center of the wheel. Suitable for drifting, ideal for fun on ice. You can find other types of wheels and other models on my profile: https://www.printables.com/cs/@VojtechStraka_466782/models
Replacement cover for 6" PIAA offroad lights. I'm not sure of the model that I have. The overall diameter is 6.25" (157mm). The lens is 5.8" (145mm). The cover snaps on for a tight fit. I replaced my PIAA 40 Series 44010 covers after one…
A small cleaning station design used to get small wisps off of tricky filament when making Toys for Tots Offroaders . Print the brackets (and attach them to a piece of wood, or attach them to another model of a block which you can weigh…
Just print in TPU, infill 30%, supports needed. Original file is for tools with a diameter from about 25 to 40mm
Resolution: 0.16mm infill (%): 20 Support: Yes Infill for tires should be 0, make the wall count higher. M4x24 screws - For the wheels.
Decorate your crawler-track with this small finish line banner Consist of 5 part: banner.stl foot_small.stl (you need 2) pillar.stl (you need 2) No supports / rafts needed Maybe you have to glue the parts together
I've printed a couple off and made a few adjustments.. Gluing RC Buggy tires can be a bit messy at times. Especially if you're a newbie like me ha! I saw a few "Tire Gluing Jigs" from various RC companies that help to press the tire down…
Real, race-spec off-road racing vehicles typically have a rear-facing amber “anti-collision lamp” that is required to be illuminated any time the vehicle is on the racecourse, for the primary purpose of alerting other drivers to the…
A roof rack for Farmersmark's 1:10 off-road trailer. Thank You to the original designer, I Love this trailer.
Nová ramena kol která nejsou spojena rychle se ničícím kulovým kloubem ale ocelovýma oskama. Také jsou upravena vystouplým uložením tlumičů pro větší výšku auta. Osky jsou 2.5 mm ocelový drát. Na jehož konce je potřeby vyřezat závit pro…
This is a cover for your All Dogs Offroad upper control arms to prevent moisture and debris build up. You will need an R29 o-ring for each UCA cover.
A friend of mine wanted to replace the TRD 4X4 Off Road decal on his truck sides with something with more dimension. This is a model I created in fusion 360. 3 files are included to accommodate print volumes. The STLs will fit on a Prusa…
Just print in whatever filament you want and prefer. Can be printed without supports easely.
Ring and cap. I printed them out of TPU. Used it an entire year. The TPU was not affected by the fuel.
![[OLD] 1/8th 1/10th offroad RC shock stand](https://media.printables.com/media/prints/34737/images/343226_9b9466f3-bb6b-4da5-a50f-75003b8de8e9/img_0625.jpg)
![[OLD] 1/8th 1/10th offroad RC shock stand](https://media.printables.com/media/prints/45948/images/456918_4cc12716-beb6-45b0-abb9-2851c64e2d02/large_display_img_0624_45948.jpg)
