Polaris Offroad Key Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement key cover for Polaris RZR and other offroad vehicles
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 414
- Wydruki
- 1
- Wyświetlenia
- 1316
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
Remix of https://www.thingiverse.com/thing:2938514
I extended the bottom edge to 7.5mm for a little more protection from mud and water, and made the grips on it extend out a little further from the original. This has a great feel in the hand and should work great with gloves.
I would recommend adding your own supports instead of auto-generated, however it works fine either way. I placed a cylindrical support in the “cup” section of it, and a 15x8x5mm rectangle in the top section. Using auto-generated supports makes it a bit harder to remove them as it goes up through the center, and fills the whole top portion where the key ring goes through.
Printed in Overture TPU, but I'm sure PLA/PETG or others would work well. Clean up the supports and any blobs/stringing with tweezers, pliers, xacto blade, etc.