Liczymy pasujące modele…
This is a bottle cap with a watering nozzle. The cap should fit any regular PET plastic bottle. The nozzle is angled by 60° to make it easier to use. Printing instructions: Use a printing sheet with a smooth surface (to avoid leaking).…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
Wall mount tow ball cap holder diameter 50 mm. Holes for M6 screws, center distance 45 mm.
This is a end cap ( 35 x 28 mm ) for a kitchen raiser. Print settings: 0.4 PETG, no support, 40% grid infill.
Gridfinity holder for FastCap ProCarpenter True32 Metric Reverse Measuring Tape. I think this may fit other fastcap tape measures in the ProCarpenter series but I only have the metric one so I cannot confirm that. Full product description…
Many RV (caravans, campers, trailers) have a bumper made of a heavy steel square tube. If you put a cover on it which is easy to put on and remove, you can store stuff inside the bumper. These bumpers are usually 6 ft / 2m long, so you…
Usage of old Seal: → Pull out rubber seal from broken cap with tweezers, cut off the upper part to a hight of 3mm (right between the bottom and the first edge) to get a new fitting seal. The seal will generate tension on the notches → no…
The left cap of the Celexon projector screen tends to break. I made a sturdier version. It's possible to use it without the metal-angle-insert, but it's more stable with it. Important info: The gap is very narrow, so please insert it…
The “bottom” screws into the funnel and the dosing cap goes in the other side. Print as is, no supports needed. UPDATE 2024-10-07: Increased the thickness of the latch wings so they have a better friction fit. Also slightly enlargened the…
I created this model because I needed for Hinamori's cosplay. I made one out of wood and moosgumi, but it didn't quite match my vision. So I decided to model a 3D model for printing. I couldn't find anything similar anywhere else on the…
Some time ago, I inherited an American Silver Eagle that was not encapsulated. I ordered a package of 25 direct fit H-40 capsules thinking that I could also encapsulate some old large dollars I had, but I didn't realize the Silver Eagles…
Works on HiCapa magazines and possibly other magazines with similar dimensions. Tested on Army Armament and extended magazines. Designed to be ergonomic, has two tabs for better grip. And a non-obtrusive lanyard hole.
I would recommend ABS or ASA, as the part is exposed to direct sunlight and therefore heat. layerheight: 0.2mm infill: 20% (gyroid) wall loops: 4 top shell layers: 5 (cause we need a little bit extra material for sanding)
This is a replacement headlight dust cap for hyundai car.
Fixed a difference with the original design. Made it from the ground up with correct measurements for my camera Category: Camera
Get your [Mini 13](https://www.printables.com/model/422353-mini-13-printable-jointed-figure) Heroes into the action with a proper cape! This project adds a frame piece which fits over the existing Mini 13's neck, and two options for…
This cap replaces the original one that cracked on my TAL water bottle. I have a XL with 5 tools, so I made it for multimaterial. There are 2 colors of PETG, a TPU ring that allows the cap to be deformed and slip back into the original…
Introducing the Good 2 Grow Organizer Rack—my 3D printed solution for keeping both bottles and caps perfectly in line! Whether you're battling snack-time chaos or just want to stay organized in style, this sleek and sturdy rack has you…
Remixed DJI Action 4 lens cap with an "anti-scratch gap" between the lens and cover.
Cap for one of Amazons most sold deburring tools: the full metal version from Vastools. Protect yourself and other items from damage by the sharp knive of the deburring tool Very simple model, but with a very nice hold on the tool.
This custom-designed hat (cap) holder is perfect for organizing your caps on the wall. The holder features four angled hooks for secure storage, plus one traditional hook at the bottom that’s easy to grab for your primary or everyday hat.…
This is a remix of the Nespresso capsule holder created by @Peter. I made this so it could fit my DeLonghi Inissia coffee machine. 3 different sizes available 180mm original author version (3x5 capsules) 150mm (3x4 capsules) this version…
The old plastic broke away and the drawer always fell out. So here ist the new end Cap for the Drawer rail. The wheel has a Diameter of 20mm.
Customized with Dungeons and Dragons logo on it. Print as it is with supports.
Magnetic Bottle Opener with Cap Catcher. Perfect on your fridge ! I used magnetic tape (20mm x 2mm) purchased on internet: https://s.click.aliexpress.com/e/_c3Foy5kB To set it up, cut the magnetic tape to the desired length and attach it…
Camera lens rear caps for M42x1, M39x1, Pentax K, Sony E, Nikon F mounts. Print Settings Printer Brand: VoronDesign Printer: Voron 0 **Rafts:** No Supports: No **Resolution:** 0.15mm & 0.4mm nozzle Infill: 100% **Filament:** FDplast ABS…
To complete this build you need a brass boiler cap base which you can get from several places. I bought mine here: https://coffee-sensor.com/product/la-pavoni-lever-boiler-cap-base-in-brass/ The shaft need to be made in PC (polycarbonat)…
This is a smooth design for a simple universal usable wardrobe hook. When the hook is not in use, it looks very inconspicuous, if printed in white! Fits for different items: caps, helmets, headband, scarf etc. Update 13.11.2024: Larger…
Simple Milwaukee M12 battery cap that allows battery to stand up securely on bench and with finger grooves for handling.
Anatomically accurate, patient-specific left and right scapulae of an 18yo male, MEDLYMPH006, of the CT Lymph Nodes Collection of the Cancer Imaging Archive (TCIA) . I segmented these from the CT scan using 3D Slicer. Scapular height is…
Kappe für Zaunrohre mit einem Durchmesser von ca. 33,8 mm, ausgestattet mit drei aufschraubbaren Insekten-Unterschlüpfen, die jeweils einen Eingang mit 6 mm, 8 mm oder 10 mm Durchmesser bieten. Cap for fence pipes with a diameter of…
I made a mistake when working with the great LaserPecker LP5 and launching a project without remove the laser lens cover… and the disaster happened :). If you lost your cover, by accident or no :) like me, or to have a replacement you can…
A set of keycaps with a plus and a minus symbol ontop. Remix of 3DLada's keycaps.
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
Use ABS - 30% infill On my old unclosed Ender 3 ive use no supports, 249º on the nozzle, and 65º on the bed, speed 80% - Speed 50% for better detail
Axial Early Bronco 1/10 Fuel Cap Print 0.4mm or 0.2mm with supports!
Customizable LED Color Filter for Dollarama Mini Battery-Powered Lights Description: Elevate your Dollarama mini battery-powered LED lights with this easy-to-use colour filter system! Designed to be compatible with the affordable white…
Preparing for tire swap season, these marked tire caps shall help by permanently marking the tire position. Print using PETG , TPU or similar weathering resistant material Print the first 3 layers very slowly to have precise letters…
If you are installing C9 Christmas light bulbs on your house and run into a spot where you'd rather not have the light showing, try this cap in place of the C9 cover. This works great on transitions from gutter clips to shingle clips to…
You can print it with PLA, PETG or what you want. I printed it with PETG, 0,20mm, 15% Infill and No Support.
Railing support 25 mm top adapter. Print in ASA for UV resistance. Sand and smoothen the top with acetone, if needed. Use 5+ walls for strength. For a clean top, print as is, with supports. Print outer walls first (or vv) to reduce outer…
Mon 1er modèle avec Fusion 360
A simple replacement for a broken broom handle cap for sticks with a diameter of 21.5 mm. It is printed with Fiberlogy Fiberflex 40D, which is a bit tricky. No support was used, but an outerbrim of 3 mm to make sure that the object is…
Cap/cover for Bosch Series 4 MUM 5. Seals the bowl holder so the Machine can still be operated without a bowl. The cover is put in with the three dents aligning with the three channels in the bowl-holder and fastened with a…
Silicone/Caulk Threaded Nozzle Cap for unthreaded nozzles
I didn't use the plastic label covers so I needed the end caps to be thicker.
This is Santipaw, the trusty Christmas capybara. The capybara is a reliable and trusty friend and deliverer of Christmas cheer. Unlike gnomes or elves, he's not prone to tantrums or grumpiness; his steadfast character is ready to bring…
I needed something on top of my Dell U2515H's stand to give better support for a clamp, so made this simple model. As it is, it works perfectly for my use case, but maybe it can work as a base for your model? Update 2024-12-11: Added…
Spoiler alert : My acquaintance is on the fence about whether she likes using this or not. But I thought someone else might find this useful, so here it is. This print was made for an acquaintance of mine who has both severe arthritis and…
The Tascame Portacapture X8 isn't shiped with any form of casing in the box and I wanted one which can hold all the naseserry equipment for it. So I put an inlay in one of Whity's Rugged Boxes for the Portacapture X8 itself along with…
Candy Cane KeyCap. My red filament is not the best…it is old and I found it in my 3D pencil box.
Bodycap for Canon EF mount cameras. I made two version one single color and one for the S5 (with adapter). The text can be customised in Fusion. Just enter the sketch and change it.
TPU front cap for the Helios 44M 58mm f2. I made two versions: one dualcolor with text and a simple one without text and one color. It might also fit for other versions of this lens but i don't know. The Fusion file is included in case…
This component serves two purposes: it functions as both a profile end cap and a structural base. To install it, first, tap the profile end hole with an M8 thread. Next, slide the part into the profile slot, and finally, secure it using a…
I recommend printing in ABS, ASA, or PETG for UV resistance & heat resistance. Print at a fine layer height, such as .16mm, for the threads. Print with the threads UP on both parts. You will probably want supports for the top.
Hi This is a Bicycle handlebar end caps. Printed in Flex (Flexfill 98A Filament)
This model turn a normal potentiometer into multi-turn potentiometer, because some time you want to make an enclosure for a board that come with trimpot, but adjusting trimpot is a pain and multi-turn potentiometers are expensive. Re-use…
50mm DN50 D50 pipe cap/stub/stop Заглушка канализационной трубы 50mm
Recently i lost my keycap for my Kingstom DataTraveler and i had to remake it.
Thanks to the ears the silica gel container fits to any spool width even if it is less high than the spool width.
Keycap for Razer Ornata V3. Print in 0,1mm, organic supports, 45° for stronger print.
SMA cap designed to cover connectors on my FPV goggle receivers. SMA cap: depth 6 mm / Inner Diam (ID): 6,2 (tight) or 6,3 (fit) 6,4 (loose) mm / wall THK 0,6 mm. Printed ID 6,3 mm for my self, best fit. Printed in Sunlu TPU 95A…
Primo bottled water is a great option for water at a campground without potable water, especially in combination with a pump. The water container is big, robust and easy to carry. Primo White Water Cooler Pump (at Lowes) I wanted to be…
This is a cap for a 30x30mm extrusion (1.25"x1.25") that can be bolted to a perpendicular extrusion so it hangs.
Travel cap for Marc Jacobs perfume bottle, as the original flower bottle cap tends to fall off when traveling. Print instructions Supports: None needed Infill: 15% 0,15mm Filament: PLA
The Lost Cap Replacement cap for standard door spring stoppers. 3D printed with TPU for flexibility and durability.
I lost the knob that secures my telescope to the tripod so I sketched up this real quick to substitute it. It's really simple but functional.
Since the RinseKit Pod is an older discontinued model, I thought it would be worthwhile sharing an end cap in case someone were to lose or break their original. This does require you to use the O-ring that comes with it. From a quick…
A 4 x 4 post protector. This should help protect and keep the post looking and lasting longer. Was printed in ASA to last and look good for a long time.
ECO-WORTHY 12V 8Ah 96Wh LiFePO4 Battery with F2 terminals on 45mm center “SLA” form factor : 65.5mm(d) x 151mm(w) x 93mm(h) [ Need to scale for different batteries ; now includes: original ECO-WORTHY model with terminals set at 45mm…
Each month, a card corresponding to the change of sign will be released. You will find a simple version that prints with just one color change and you will also find a galaxy version which I had a little more fun with which mixes a…
🌱 Nachhaltiger Verschluss für Sagrotan "no touch" Flaschen 🌱 Mit diesem innovativen Verschluss für die Sagrotan "no touch" Flaschen ist es möglich, die vorhandene Flasche einfach und nachhaltig wiederzuverwenden. Der ökologische Aspekt 🌍…
The corners of the aluminium extrusion profile of my Hammer table extension are rounded but still sharp enough to hurt if you bump against it. To cover them up, you can use this cap.
iPhone 11 wireless charger stand. Portrait or landscape. Basic stand mounts a uGreen wireless charger of ~96mm diameter This re-mix includes an adapter wedge that enables mounting a generic Amazon wireless charger of 56,0mm diameter /…
The third pin (circular) is shortened compared to an electrical plug, and is only used for orienting the part. A second model without the third pin is also provided for receptacles with only two cavities. Do not re-orient the part for…
A clamp to stop the ptfe from movement during retraction due to the ptfe fitting lock moving in and out of fitting. there have been 3 edits since initial release, lengthened the lock collor relief, increased its outer diameter clearance,…
Nespresso Capsule Holder Holder For Nespresso Coffee Capsules Holds 3x3 Capsules (9 Capsules Total) How I Printed It: THIS IS ALSO HOW I RECCOMEND IT TO BE PRINTED :) Printer: Creality Ender 3 S1 Material: PLA Nozzle Diameter: 0.4 mm…
I lost a cap off my camper jacks and the other 3 were old and cracked. OEM replacement caps are over $8 each so I designed this cap for a replacement. Just print it and snap it in place. Be sure to check out my profile for more of my…
NEW: Homing bump variant is now available! This model is made to fit into the standard key switches that come with the Voyager. It is definitely not as high quality as the ZSA caps. This will not allow light through it unless you print it…
Originally made for a friend of mine, this pop-on cap is designed to fit onto a NERF N-Strike CS-18 blaster battery housing. My friend upgraded his Nerf gun to use a NiMH battery instead of the stock battery set up, however the stock…
A great Wall Art of a nature landscape. Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) Inspired by a sticker
Some valve caps for vehicles, I made these with 0,2mm nozzle. This far: tesla, f150, bmw, toyota, yamaha, gasgas, will add more later.
Designed for use with my Ryobi Compact Battery Powered Chemical Sprayer. This allows the use of "standard" bottles. The intake tube can simply be extended with 5/16 in. I.D. x 7/16 in. O.D. Clear Vinyl Tubing No supports
My contribution to Valentine's Day: this capybara charm for hanging on your phone. 😊 It can be printed separately for those with a single-color printer, and together for those with a multi-color printer. I’m providing files with the…
These are custom front lens caps designed for the Pentax UD 9x21 binoculars. The original binoculars do not come with front lens caps, so I created this model to provide proper protection for the lenses. Features: Designed to fit snugly…
Airline rail end cap. Perfect for: https://ntg-online.de/shop/Airlineschiene-Zurrschiene-2-x-2-m-2-Meter-halbrund-m-Bohrungen-u-Fitting-Plastik Tight fit. Will not come off easily. Print with supports on build plate only. Deutsch:…
![Cape for Mini 13 [v1]](https://media.printables.com/media/prints/1036338/images/7861287_f72743cc-0116-4f2c-b050-0b8ec484c0f4_b092b92b-ba06-4130-8a6e-b110372474e6/img_6519.jpg)
