RJ45 ethernet boot/cap/cover/ works post crimping
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Forgot to add the boot/cap/cover to your RJ-45 cable and you crimped it already? been there, done that. Hope this helps.
- Ocena
- 3 / 5
- Polubienia
- 61
- Pobrania
- 403
- Wydruki
- 2
- Wyświetlenia
- 2302
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello!
Forgot to add the boot/cap/cover to your RJ-45 cable and you crimped it already? been there, done that. Hope this helps.
This is a work in progress (W.I.P.) as it's not the easiest print using FDM printers, yet.
Update 2022-09-07 (YYYY-MM-DD): Printability on FDM printers improved. Tested with PLA and PETG.
NOTE: PLEASE USE V4 FILES!
I designed it with printing in mind so it doesn't need supports but the small details are giving me some trouble with the print. I will continue to improve the design to make it easier to print.
The two parts attach together and snap into place, enclosing the RJ45 cable and the cable itself.
Any advice to improve printability will be greatly appreciated!
The idea behind this project is to be able to add protective caps/covers to RJ-45 cables after it has been crimped.
Here's a short about it: