Wyniki wyszukiwania: ethernet

RJ45 Ethernet Plug Protector

Repaired version of RJ45 Ethernet Plug Protector

Spool for 30m ethernet cable

See original. Just print it two times and glue the two prints together.

RatRig VCore 4 Ethernet mount

Route the ethernet cable via the bottom hole up the middle extrusion in the back into the electronics box. Connector used: https://www.amazon.nl/-/en/dp/B07NJ5XNMN

Travel Trailer Ethernet Pass-Through

This is designed to replace the coaxial input/output ports commonly found on travel trailers and RVs, allowing you to repurpose those ports for Ethernet connections without modifying or adding new holes to the trailer. The design is…

wall grommet for ethernet cable

this is a grommet/ cover i made for the hole in my wall that my ethernet cable comes out of, it makes it look neat.

ethernet cable clip

I wanted to tidy up some of my Ethernet cables, so I made this little clip for it. I also had 2 power cables for my switch and AP, so i also added a small hole for those.

Neptune 3 Pro front cover + 5V PSU mount + USB & Ethernet Port

UPDATES 2025.09.01: Added N3P_Front Panel_Wiring Mounting Bracket. Added N3P_Front Panel_Left_PSU and Ports. Adjusted model description. INFO An extended front cover for the Neptune 3 Pro. It might also be compatible with the 4/4 Pro but…

XikeStor SKS3200-8E1X-P Ethernet Switch Wall Mount

This is a simple wall mount for the XikeStor SKS3200-8E1X-P ethernet switch. This 9-port multi-gigabit switch with POE+ has three M3 tapped holes on either side that are designed to be used with the included rack mount brackets. I've…

Lowrance sonar 5 pin ethernet connector

The case can be fitted with dupont cables or paperclips and then sealed.

Ethernet Mount for HP T620

Description This Holding part allows for a second Ethernet jack to be mounted within an HP T620 enclosure. This is needed, if the thin-client is used as a router (Example: pfsense). This plug replaces the Serial or VGA port on the device.…

10'' Rack Mount with 3x Ethernet hole and 1x big hole for Cables

This is a compact rack mount unit , specifically designed to fit into a 10-inch wide rack system . Its primary function is to help organize and secure cabling within a network or audio/video setup. He as 3x Ethernet hole and 1x big hole…

Flat ethernet cable spool with drill winding core (5m)

A 5m cable variant of the cable spool.

10-inch 1U rack mount shelf for YuanLey YS25-0402 (4 Port 2.5 GbE plus 2 Port 10G SFP+ ethernet switch)

Wanted to incorporate another model in my setup. This time instead of modifying or modeling the rack mount shelf, an existing OpenSCAD library suitable to the purpose was used. Found https://github.com/wildegnux/universal-rack-shelf in…

Ethernet cable wall holder

Ethernet cable wall holder with screw mounting holes.

Ethernet port RJ45 LED light cover

Ethernet port cover mounted on an RJ45 plug to block the LED light (normal and slim version)

RAK WisMesh Ethernet Gateway Indoor Case

Simple indoor case with clip top for a PoE powered RAK WisMesh Ethernet Gateway. It's based on the RAK19007, RAK4631, RAK13800 and RAK19018 modules. I just used the integrated basic antennas and stuck them to the inner wall of the case –…

Zero G Feet with Adapter Ports for USB and Ethernet

I added a USB to accept the adapter linked below and a standard Ethernet keystone port. https://www.amazon.com/dp/B0BDWV1BCV?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

FENVI 10Gbit/s Ethernet Mod for Intel Nuc (12./13.) - Marvell AQC113

This is a remix of the original “Intel NUC 12 Pro Innodisk EGPL-T101 cover and accessory port kit” , adapted to fit a FENVI 10GbE module based on the Marvell AQC113 chipset . I built this because I wanted a small, quiet and…

Starlink Gen 2 Router 10" Rack Mount W/ Ethernet Adapter Slot

I noticed when building my mini rack that the only mount available for this router was this and this . So here is a custom designed one that isn't 170-140 dollars. Fits great, I printed mine from PLA+ with tree supports. Its a long print,…

TP-Link TL-SG105S-M2 | 5-Port Multi-Gigabit 2.5G Ethernet Switch 10" Rack Mount

Fits that specific model, but may be tweaked for other models as needed via the main files.

Ethernet port dust cover

Two different covers. One with handle and the other flush. Use the flush covers for ports that are rarely/never used.

Drop Keeper - Ethernet Drop Ceiling Plug - 1 Inch Hole

I made this model for use on some ceiling ethernet drops I ran for future use. I was up in the ceiling doing camera drops, and I added some extra drop for wireless access points later, I terminated to keystones, used a short patch cable…

RJ45 Drop Jaw Ethernet port cover for Dell Latitude/Precision 5520/3560

Can be printed with PLA 0.4mm [email protected] layer height. Might also fit for other models

Ethernet cable clip for baseboard

The original 5.5mm round ethernet cable had to be routed along the baseboard since it wouldn't fit inside it (more precisely, the mounting element in the wall was creating an obstruction). The original solution held the cable with only a…

Ethernet Wall Penetration Gland

I was installing some Reolink Cameras at my house and needed a pretty large hole in the wall to put the molded cable ends that came with the cameras. And since there aren't really cable glands mean to go onto walls that i know of I made…

Ethernet Breakout

Ethernet PCB Breakout

Belkin 12 port Surge Protector Power Strip version with ethernet/coaxial ports for multiboard

revised for the Belkin 12-port surge protector variant that includes Ethernet and coaxial pass-thru b/c it's thicker

Unifi G5 Turret Ultra Spacer Mod - Pigtail Storage + Ethernet Cable Cutout

Modification of the original G5 Ultra Turret spacer to allow pigtail storage + ethernet cable ingress/egress. Would recommend silicone to seal up the space around ethernet cable if there is a chance of moisture getting in. All credit to…

Noctua NF-A9x14 + Ethernet case for Minix NEO Z100-0dB and Z300-0db

I added an M.2 ethernet controller to get a second LAN connection on my Minix Z300-0db. I had the ethernet connector board just hanging out loose out in a simple 3d printed box, but I wanted it more permanently mounted to the machine, so…

lexman ethernet coupler Patch Panel

10 inch patch panel for Lexman Ethernet Coupler . Material: PETG

Dell PowerEdge R430/R530 iDRAC bracket for external ethernet / sdcard module (CN-0x99HC)

WARNING: Not yet tested on a live server for fitment. If you’re able to test it before I do, please let me know in the comments. Replacement bracket for external ethernet / sdcard Dell module (CN-0x99HC) used in Dell PowerEdge R430/R630…

Adhesive Cord Holder Clip, Holds Starlink Ethernet, Rv Exterior - 3D Printable STL File

Say goodbye to cable chaos with this Adhesive Cord Holder Clip, Holds Starlink Ethernet, Rv Exterior Cable Management Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…

Flat Ethernet Cable clip Nail Both Side

I added a second nail hole to the flat cable clip for a stronger hold on the concrete wall.

Ethernet Untwister

I've seen a couple Ethernet tools with this feature built in, but never on it's own. So I designed one. It's just a compact tool for untwisting ethernet pairs. Handy for your networking tool bag. Glue together with the 'wheel' flush with…

RJ45 Ethernet Cable Connector Repair

This design is a unique combination of the short designs, where the latch is fixed at the connector and the longer designs, where the clip is mounted to the cable behind the collet. The design considers the exact dimensions of the collet…

HP EliteDesk 800 G3 mini - FlexIO second ethernet adapter

This is what I would define as a function modification as it is what I consider a very unpolished piece of 3d printed hardware. That said I did make the adjustments by hand to fit the following adapter so it doesn't directly collide with…

Brother Speedio Ethernet adapter

Tenda SG105 gigabit ethernet switch Multiboard (Multibuild) mount

Easily attach and secure Tenda SG105 to Multiboard (Multibuild) grid. horizontal / vertical version securing snaps for vertical version to avoid slide-off Vertical mounting: attach Tenda SG105 onto two pegs, slide it "to the end" snap-in…

SPF Fiber to Ethernet Converter Wall Mount

Remixed to fit an SPF to Ethernet converter. 2cm wide. Added holes for heat dissipation. Wall mount screw holes same placement as Fitzbox 5530 Fiber Modem, so it can easily be replaced.

CAT-6 Keystone Wall Ethernet Holder

Keystone ethernet holder. Ever had ethernet cables not stop coming out of your keystone jack? I have so I made this simple solution to keep it in place.

Nintendo Switch Horizontal Angle Dock for Ethernet/OLED Switch

I tried to use @kulfurst Nintendo Switch Horizontal Flip Dock , but found that it doesn't fit the Ethernet version of the dock that is included with the OLED Switch. I redesigned the stand to fit the Ethernet dock from scratch, but…

RJ45 Keystone Ethernet Network Cable Mount

I have another advanced version of this that has various sizes (30, 32, 35, and 40 to ensure your adapter will fit). https://www.printables.com/model/886799-rj45-ethernet-cable-rj45-keystone-mount I could not find something to protect the…

RJ45 Keystone Ethernet Cable Mount - Various Sizes

I could not find something to protect the end of my carefully installed shielded 50 foot cable snaking through my house to my computer so made this rj45 jack mount. This a raised mounted rj45 keystone jack for Ethernet cables. You also…

Gridfinity bin for Ethernet cable/plug tester

See my other gridfinity bins at https://www.printables.com/@Morbier/collections/1571697

Ethernet Cable Mounted Clip

I made this to organize a pile of cables coming down into my basement. I wanted to keep them straight before going randomly to j-hooks. I print it vertical (clip opens up) with no supports on a flashforge ADM 5 Pro. I then take a little…

Hue Bridge Ethernet wall plate mount

Needed a way to mount the hue bridge to an ethernet wall plate so I created one -posting it in case some one else might find a use for it. Just replace an existing Ethernet wall plate -the built in opening is designed to accept the snap…

Ethernet RJ45 keystone socket wall plate

just a simple single port wall plate for ethernet with a RJ 45 keystone

2.5G Ethernet adapter bracket for Optiplex Micro 7050

Installs into the secondary display port, just above the built-in network and USB ports. Requires: 4x M3x4x5 heat-set inserts 2x M3x8mm countersunk screws Also uses 2 screws removed from the original metal bracket Potentially worth…

ESP32 ethernet I/O board DIN rail housing

This is the housing for the ESP32 based ethernet I/O board for home automation. There is a commercial DIN rail mount housing, but I did not wanted to modify one, so I have designed my own. Mine version is a lot smaller. NOTE: For my…

Ethernet Outlet Plate for Keystone Ethernet Coupler or Jack

These Models are for Ethernet Outlet Plates or Covers for one, two or four Keystone Ethernet Couplers or Jacks. I've included models for both a standard sized Outlet Plate and an enlarged or XL Outlet Plate. I recommend printing with 4 or…

1U Modular Tray for ASUS MA-25 Coax to Ethernet Adapter (MoCA Adapter)

I wanted a tray for the ASUS MOCA adaptor . I started with the Raspberry Pi simple tray and using tinkercad I created a stand-in for the ASUS. I then used this to adapt the simple tray.

Clip to wall - Speaker cable, UTP, USB, Ethernet, power plug ...

Clip to wall - Speaker cable, UTP, USB, Ethernet, power plug ... I recommended print from PETG because of flexibility a and dirability Bottom port is for cable up to 7mm, rest of holder up to 6mm Happy print

Waveshare Ethernet / USB hat case

Case to Waveshares Ethernet / USB hub hat for raspberry Pi. No screws needed. Link to the hub: https://www.waveshare.com/eth-usb-hub-hat.htm SKU: 16595

RJ45 Ethernet Plug Protector

Repaired version of RJ45 Ethernet Plug Protector

Ethernet Clip

Small clip to help hold two ethernet cables together and straighten up your rack!

Keystone Cap for Ethernet RJ45 Cable Spool

Remixed the Keystone Cap to fit @ChristianBra_1608057 's Cable Spool. Recommend printing it standing on it's side, as it makes the flanged arms stronger, I used normal grid support.

Ethernet Inset Wall Plate

Single gang plate to accept ethernet socket, inset into wall and angled to 45 degrees to allow furniture to be placed up against the wall without damaging the cable. Friction fit.

RAK 19007 + ethernet mount

Quick and simple mount for RAK19007 base board with ethernet add-on module. Didn't see anything out there to help support the ethernet card when installing into an enclosure. It's not super pretty but gets the job done. This is not set up…

Airstream Desk Keystone Ethernet Jack

This is a replacement cover for the cable pass thru in an Airstream office desk. It has a keystone compatible socket for a keystone ethernet jack and pass through for cables. I designed this for use with my Gen3 Starlink router as I…

Ethernet Wall Mount

Ethernet Wall Mount with spheres

Raspberry Pi Zero + Ethernet / USB hat case (Pihole) REMIX

This is a remix for better fitting the Raspberry Pi Zero + Ethernet / USB hat case based on the original model by Woyta

Ethernet Cable Lock for all Scenarios

This more flexible ethernet lock will work with cables going into recessed PC sockets, routers and wall sockets etc.

Ethernet coupling cover compatible with Starlink Gen 3 cable

A cover to protect a connection between a starlink gen 3 cable and a slim line ethernet cable. The slim ethernet cable allows you to pass the cable through a european style window, without having to drill holes into the outside walls of…

Ethernet Protective Cap

This protective cover for Ethernet plugs helps prevent breakage and dust accumulation. I added an opening that allows you to attach it to the cable when not in use, so it's always within reach. 😉 ✅ Prints without supports ✅ Recommended…

Ethernet cable spacer/airgap

I needed a way to hold a disconnected ethernet cable in place so it doesn't get misplaced. I combined the ethernet port plug with a cable endcap so an ethernet cable can be kept in place while disconnected.

Low Profile PCI bracket for 2.5Gbit ethernet M.2 A+E card

Low Profile PCI bracket for 2.5Gbit ethernet M.2 A+E card this is a remix of Arek's pci bracket for the RTL8125 M.2 A+E Card but in low profile format This has been mirrored (because low profile brackets are the other way round) and…

Ethernet Jack Wallplate

A simple Ethernet Jack adapter plate for Pass & Seymour / legrand Ethernet Jack.

Ethernet Cable Comb (Cat5e)

After lots of versions, I think I have made a nice cable dresser. Designed for Cat 5, may need to be slightly scaled up for Cat 6 and beyond. Directions (if you really need them) Print two at a high infill for strength. Put them together…

Case for SlimmeLezer ethernet

Case for SlimmeLezer ethernet

Voron Skirt Keystone for USB/Ethernet

Reworked the keystone holder to work with my specific model

Kleine Kabelrolle für W - LAN - Ethernet - Kabel, zum aufrollen

Netzwerkkabel lassen sich Platzsparend aufwickeln und aufbewahren. Verlegte Kabel sind oft zu lang und sind schwer irgendwo zu “verstecken”. Mit dieser Kabelrolle lässt sich die überschüssige Kabellänge bequem auf wickeln, mit den…

Spool for 30m ethernet cable

See original. Just print it two times and glue the two prints together.

Arduino Portenta H7 case - ethernet Vision Shield

This is a small case designed for the Arduino Portenta H7 with ethernet Vision Shield board. I used PLA material for the cases.

RatRig VCore 4 Ethernet mount

Route the ethernet cable via the bottom hole up the middle extrusion in the back into the electronics box. Connector used: https://www.amazon.nl/-/en/dp/B07NJ5XNMN

Ethernet switchable 2-port power outlet

Wired Ethernet switchable 2-port power outlet with full local control from your web browser or via your smart home with the usage of prepared URLs. It uses the WT32-ETH01 ESP32 board which allows using ESP32 controllers connected to your…

Meshtastic RAK19001 Base Board - RAK13800 Ethernet Module - RAK19018 PoE module Base Plate - Gratury Junction Box, IP67 Waterproof Plastic Enclosure 220×170×110mm (8.6"×6.7"×4.3")

Note: The Ethernet Module PINs didnt land where I expected based on the model, so I used a knife to cut the lower two standoffs. I attempted to replicate this in the .STEP but its not tested and certainly would be below the expected…

Leviton SMC bracket for TRENDNet Ethernet over Coax 2.5GB MoCA bridge

I have a Leviton 47605-MDU where I terminate the network stuff in my home. I wanted to use the TRENDnet Ethernet over Coax 2.5Gbps Adapter (model TMO-312C) and I didn't want it just hanging in there. This bracket allows you to snap it in…

Travel Trailer Ethernet Pass-Through

This is designed to replace the coaxial input/output ports commonly found on travel trailers and RVs, allowing you to repurpose those ports for Ethernet connections without modifying or adding new holes to the trailer. The design is…

Table spacer with Ethernet Keystone

Table spacer with two Holes for Keystone connectors.

Raspberry Pi Ball Socket Ethernet Mount

I was using the ball socket from this Raspberry Pi camera additional parts . When using that part this mount isn't quite tight enough to keep it from just flopping around. Went into Fusion360 and recreated it with a slightly larger ball…

CableTag for ethernet cables

Print in PTEG or something a litle bit flexible.

Raspberry Pi 2/3 cover (Ethernet and USB)

A small front cover for my 19" Raspberry Pi rack to cover the messed up hole. I simply hot glued it in place. Print Settings Printer Brand: Anet Printer: A8 Resolution: 0,2 Infill: 25% Category: DIY

10" Rack Mount Bracket Ethernet Switch TpLink 8 port

10" Rack Mount Bracket Ethernet Switch TpLink 8 port Flat version – Use this if you don’t have space issues between rack units (you can print this model horizontally); Standard version – Provides extra inter-unit clearance. Choose this if…

Ethernet cable wall guide

Remix of https://www.printables.com/model/321603-ethernet-cable-wall-mount

Fan Bracket for X550-T2 Intel Ethernet-Network-Adapter

Designed for the NB-BlackSilentFan 40mm (XM-1) Designed for PETG Print settings I used: 25% infill 4 wall loops Tree supports Rotate top side on build plate Sits very snug and firm.

Meshtastic / Rak Wireless 19007 ethernet case

Meshtastic / Rak Wireless 19007 ethernet case. wanted something i could mount in the garage so it didn't need to be weatherproof.

D-Link Ethernet Switch GO-SW-5G Under Desk Mount

A very simple model I made to mount my D-Link GO-SW-5G ethernet hub under my desk. It might fit other hubs. The inside measurements are 95mm x 75mm, just slightly larger than the hub's footprint. The zip tie holes are 6mm x 2mm. I've…

Panasonic Q - FlippyDrive Ethernet Bracket

This is the bracket for the FlippyDrive Ethernet port (the old style with screw holes), for my Panasonic Q Backplates

HP EliteDesk G4 Bracket for Ethernet Port

This is a Remix of HP ProDesk / EliteDesk G4 Ethernet Port Flex IO Adapter von Burf | Kostenloses STL-Modell herunterladen | Printables.com from Burf. Please see his Model for Details. I could mount my Bracket without modification of the…

wall grommet for ethernet cable

this is a grommet/ cover i made for the hole in my wall that my ethernet cable comes out of, it makes it look neat.

Ethernet Coupler Mount

This is a screw on mount designed for the Benfei ethernet coupler from amazon.

Pihole Zero2w Ethernet Case

Raspberry Pi Zero 2W Custom Case for PiHole with Waveshare Ethernet/USB Hub Hat This meticulously designed case is tailored to house the Raspberry Pi Zero 2W (no headers) along with a Waveshare Ethernet/USB Hub Hat (B), offering a sleek…

USB-A, USB-C, HDMI, and Ethernet Plugs from Kistek

Laptop Port Plugs by Kistek Protect your laptop's ports from dirt and potential damage with our laptop port plugs Currently available: USB-A, USB-C, HDMI, and Ethernet Printing Instructions: Material: TPU (harder materials may damage…

ESP Thread Border Router Case (Ethernet)

A case for the ESP Thread Border Router with attached Ethernet daugther board. The Border Router is developed by Espressif and consits of an ESP32-S3 and ESP32-H2 SoC. It can serve as a Thread Border Router using the Openthread Border…

Ethernet Cable Floor Cover

Print without supports on auto orientation or print upside down (cable slot facing up) with painted supports for the connecting piece. The fit between pieces is very snug, align them and step on them to lock them into place.

Dual ethernet low profile PCIe bracket

Print standing on “feet”. Tree supports are good - auto ones should work. Needed mine for HP T730 thin client.

Ethernet LAN Cable RJ45 Protection Cap

The Ethernet LAN Cable RJ45 Protection Cap is used to protect connector of the ethernet LAN cable.

Ethernet Cable Tag v1

Simple ethernet cable tag solution designed to work with 12mm P-Touch label maker labels. Easy to mass print and fits most widths of CAT5e/CAT6 cables. Print in different colors for better organization! P-Touch label:…

ESP32 ETH01 Ethernet PCB – SCR-CON-01 case

Behuizing voor ESP32 ETH01 en custom pcb van huizebruin.nl

Half hight 2.5GB RTL8125BG M.2 Ethernet Network Card bracket

The model contains a support for the screw recess