Ethernet Outlet Plate for Keystone Ethernet Coupler or Jack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ethernet Outlet Plate or Cover for one, two or four Keystone Ethernet Couplers or Jacks
- Ocena
- 5 / 5
- Polubienia
- 66
- Pobrania
- 490
- Wydruki
- 4
- Wyświetlenia
- 1321
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These Models are for Ethernet Outlet Plates or Covers for one, two or four Keystone Ethernet Couplers or Jacks. I've included models for both a standard sized Outlet Plate and an enlarged or XL Outlet Plate. I recommend printing with 4 or more Wall Loops and a minimum 25% infill for strength to reduce warpage when screwed to the wall box. The Plates were designed for a Keystone coupler or Keystone jack that simply snap into the Outlet Plate. Two 6-32 wall plate screws are required to mount the Outlet Plate to an outlet box.
3/14/2025: I added models for a 3-slot cover plate and another for a filler plug for unused slots.
I used the following couplers for my application:
https://www.amazon.com/dp/B09F9FN53W?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
The Outlet Plate works well with the following wall box:
https://www.printables.com/model/1018753-outlet-boxbracket-1-gang-low-voltage-open-back