Liczymy pasujące modele…
This magnetic keystone single jack mount designed these to go with 10 mm diameter x 2.65mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Magnets: https://www.amazon.com/gp/product/B09ZLFNZ4S…
This magnetic keystone dual jack mount designed these to go with 10 mm diameter x 2.65mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Magnets: https://www.amazon.com/gp/product/B09ZLFNZ4S Inserts:…
This lets you use a keystone jack in the hollow part of a spool to give you the ability to have one end buried but still usable. This lets you re-use spools, which can be helpful because PC can be harder to recycle.
There are no Keystone Mounts available for the Racknex UM-SBC-209 so i thought i design my own. Print Settings Printer Brand: Creality Printer: K1 **Supports:** Yes Resolution: 0,2 **Infill:** 100% Category: DIY
Need a keystone panel for your rc2014? This has you covered. Quick print, requires no support materials. Compatible with the Bump-Out-Box: https://www.printables.com/model/1068569-bump-out-boxes-for-the-rc2014 Source code on Github:…
HP Elite/Prodesk mini (G3/4/5, possibly later) 10" 1U rack mount with 2 keystone slots. 250mm wide faceplate.
Revised Left side model 20260215 - Inner screw holes did not line up as intended. There is also a remix that fixes this problem in a slightly different way. See Link Below:…
E N G L I S H A housing for a standard Keystone module ( https://amzn.to/3LMuK5u ) to be able to install a LAN connection is a German sub-distribution, so that you can also still get to the LAN port. Right side is closed, left side is…
This is a 10" rackmount for keystones as well as separate accompanying panels for labelling said Keystones. The label strip can be placed above or below the Keystone panel. Required hardware: Screws and cage nuts that came with your…
10" rack mount / shelf for Dell Optiplex Micro / MFF Series 5 with a hole for a keystone module. Models that should work: 3040, 5040, 7040, 3050, 5050, 7050, 3060, 5060, 7060, 3070, 5070, 7070. The rectancle on the rear right side is to…
12 keystone patch panel for 10" rack + test piece to test fit. Blank keystone module. Cable pass keystone moduly in 3 / 6 / 9 mm. SMA bulkhead keystone module. Toggle switch keystone module. I recommend printing the test piece first to…
Remix of Keystone Panel Mount by M Hole diameter is 3.4mm and the screwhead (widest part of the scew) 6.25mm.
Just a simple solid keystone wallplate for RJ45 sockets, the one I use with this → CAT6 Shielded Keystone Dimensions: Print from whatever you like, I print mine from Matt White PETG, just print face down, no supports needed for anything.
Due to the top mounted PCIe slot of heron's 10inch ITX Case V2 I ran into an interference issue with the original bracket. I cut away the upper lip to make the bracket close flush and thus allowing to mount another 10inch module over it.…
I tried many keystone mounts but no one fitted my RJ45 keystone I had in my stock. So I designed my own. Features: Closed case Simple, sturdy and small Prints without support Strain relief with a small zip tie for keystones without…
I'd printed out one of Masiakla's rack mounts to use with a GS308v3 switch, but as I was considering the way I'd use it in my own setup, I realized I wanted to have at least one keystone connector to run a cable through behind the rack.…
A 7-inch rack mount for the JetKVM. This model is compatible with the GeekPi RackMate TT (Affiliated link). I made this model in 2 variants. For 1 or 2 JetKVMs. Each variant also has versions with keystone slots. A huge shout-out to…
A 7-port keystone patch-panel made to fit in 7-inch racks. This model is compatible with the GeekPi RackMate TT (Affiliated link). This model is part of a series of 7-inch rack mounts I've designed. You can check out the others here . Do…
Intro Keystone is a calm but surprisingly challenging balancing game for two players. Build a wall from small, asymmetric stones — each piece is different, every round plays out differently, and every move matters. You can play together…
This is a modular 3D printable rack-mount solution for an Intel NUC 7 , designed to integrate keystone jacks into a clean, professional front panel. It was originally made for a TecMojo 10" rack , but should be compatible with other…
Bracket to adapt a keystone module for panel-mounting. Glue required to fix the bracket to the keystone module. Leaves a gap as specified in the file name for having the module be flush with the external side of the panel. Gap shown in…
I needed to mount a 5 port switch and 2 Radxa X4s in a 6 inch rack, but the X4s had to connect to a different switch because they required PoE and I had other things I needed the 5 port switch to connect to anyway. So I made this. Also…
Keystone Port Panel for Toyota Corolla Head Unit Replaces Toyota Corolla E120 2004-2008 | Part Number: 83910-02070 I recently replaced my stock head unit with a BOSS BE7ACP-FT and designed this panel to cleanly integrate the USB ports…
I designed this model to be used at the back of my 10 inch mini rack. To unplug the rack for transport I just unplug the ethernet cable from the ethernet coupler mounted in the rear of the rack. You could use it in other ways as well. I…
Slot for easy assembly of cables that are already attached to the connector
This is a flush-mount 2" desk grommet with an integrated 4-port keystone panel designed for clean, permanent desktop I/O access. It installs into a standard 2" hole and is ideal for desks made from solid-core doors or similarly thick…
To secure the computer to the mount, you need two M4x6mm screws. There are options for 2 couplers, 1 coupler, or no couplers. The model can be accessed on OnShape here .
The model is quite simple and prints without supports. I have tested it with two different types of couplers and both fit well but your milage may vary. The design can be modified using this OnShape link .
I have a Keystone dehumidifier with an overflow outlet that one can hook a hose up to. There is a plug that normally closes off the hole; one of our pets got ahold of the plug and chewed it up to oblivion. This plug can be printed in a…
A quick angled keystone panel I threw together to replace the ancient Hills Home Hub patch panel that was in my home. Uses two M4 screws to screw into the peg hold backing mount.
gedruckt mit 0.28mm, 2 Wall, 10% Infill auf Snapmaker U1 mit 59g Filament in 1h 17min
This prints best in the orientation already given in the .m3f file: Face down, with supports on the clips, arches and screw holes. On the U1, a brim is recommended, as these long models have a tendency to peel off the build plate…
I have a bunch of Ethernet, coaxial, and fiber-optic cables sticking from the hole under the ceiling where the 2-socket mount box was inserted before. Had been trying to organize them with easy access, and came up with idea of this box…
I liked the keystone, but it was slightly too short for my Trident. Lazily extended in Blender by 40mm on each side.
Módulo simple y doble para conector RJ45 hembra (keystone) marca Prosoft Cat. 6 para bastidores de la marca Soma.
Use this protective and comfortable double Keystone holder to punch down your ethernet wires. Side holes are helpful for hanging from a carabiner.
In theory the cap should protect the connector from dust and moisture but I have not as yet added features for an O ring or otherwise to seal the water out. I used some dielectric grease to help with water protection for now. Printed with…
I would recommend printing at a 45 degree angle with tree supports
This is a keystone box for 3 keystones that can be mounted in any of the four sides. After being asked by KCx3DP to modify the original so that they could mount the keystones on the side, I realized it was easier to just make a different…
I added to the wonderful ESRack collection originated by @EvilProphet. I designed this module using Fusion. It fits a BeeLink EQR6 + 1 JetKVM + 2 Keystone jacks in a single 2U ESRack bracket. According to BeeLink website, EQR7, EQRi12 and…
Under-Desk RJ45 Keystone Jack Bracket – 1, 4, 5 & 8 Port Versions Clean and sturdy snap-fit mounts for standard RJ45 keystone jacks. These brackets let you neatly install Ethernet ports under your desk, shelf, or workbench for easy access…
Note: Please print the STL in the "Long Plug+Boot" folder to avoid issues with RJ45 Plugs being too long. The version you see in the pictures has a flaw i only noticed after taking said pictures: Ethernet cables with a maximum Plug + Boot…
Some ABB components are not easy to find in some parts of Italy, especially if you're not a professional electrician. Since I'm not one, and one of my keystone holders broke, I decided to print it myself. Every single measurement has been…
I designed this patch panel for the use in my 10" rack but decided to publish it. Well I only tested its compatibility with FGB CAT7 RJ45 Keystones but I am certain that it is compatible with almost every type of keystone! ;) Have fun…
A simple enclosure for an ESP32 and a keystone jack with a bracket to mount on a 1/2 Pipe printed out of Polymaker ASA. with supports
Keystone ethernet holder. Ever had ethernet cables not stop coming out of your keystone jack? I have so I made this simple solution to keep it in place.
This is a 24-port keystone patch panel sized to fit 2x between 16" center 2x4 studs in an unfinished wall. Two STL files are provided -- mirrors of each other for installations that need up to 48-ports between two studs. This model is not…
I have another advanced version of this that has various sizes (30, 32, 35, and 40 to ensure your adapter will fit). https://www.printables.com/model/886799-rj45-ethernet-cable-rj45-keystone-mount I could not find something to protect the…
These skirts come with 0-3 keystones on each side, in all directions a keystone can be rotated. They also come with an optional mesh that can be printed with a single filament swap. As the hex grid is prepared in the model, they will line…
I could not find something to protect the end of my carefully installed shielded 50 foot cable snaking through my house to my computer so made this rj45 jack mount. This a raised mounted rj45 keystone jack for Ethernet cables. You also…
Add a keystone receptacle at this cover location - mainly useful for those who have G2Z and nothing behind this cover. Would be interesting to hear if someone with stock motors can use this at all. Designed from revision 0 of the Micron…
this is a wall mount for keystones i made to fit in some cable trunking its made so you can roughly cut out a part of the side and bottom of the cable trunking and have see no gaps when installed if printing with abs like , i would…
A keystone faceplate with 80x80mm dimensions as commonly found in Europe. Angled so the keystone fits inside shallow wall boxes. Keystone fit optimized for Telegärtner AMJ-Modul K, but should also fit most other keystones. Category:…
This is a rough design for a floor panel where people were stepping on the jacks and breaking them. This is designed to protect the ports while still allowing easy access to the network and power jacks.
10 inch network rack combination Ubiquiti PoE and keystone module spaces.
just a simple single port wall plate for ethernet with a RJ 45 keystone
I made this model mainly because I wanted a patch panel to fit my Mikrotik RB5009 in the same 1U space.
For whatever reason, the original was way too loose on my DIN rail, so I remixed it to fit way better, at least on mine!
These Models are for Ethernet Outlet Plates or Covers for one, two or four Keystone Ethernet Couplers or Jacks. I've included models for both a standard sized Outlet Plate and an enlarged or XL Outlet Plate. I recommend printing with 4 or…
The Keystone Materia stolen by Cait Sith and given to Tseng in Final Fantasy VII: Rebirth. This materia is required to progress in the Temple of the Ancients. The dog tags are just a bonus because although Turks have an unusually strong…
Designed to a minimal size for integrating into other prints. Excuse the bridging quality in my photos!! I printed in ABS and so printing in other materials might introduce slightly more tolerance, but still good fitment. I have used…
This print allows you to mount your Unifi Flex Mini 2.5G switch on a keystone or similar ethernet outlet. The non-2.5G version is HERE Print flat side down On smaller printers position print diagonally it's long Print Settings: no…
This magnetic keystone single jack mount designed these to go with 10 mm diameter x 2.65mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Magnets: https://www.amazon.com/gp/product/B09ZLFNZ4S…
This magnetic keystone dual jack mount designed these to go with 10 mm diameter x 2.65mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Magnets: https://www.amazon.com/gp/product/B09ZLFNZ4S Inserts:…
A panel mount for Keystone Connection that looks like the Black Box Keystone Panel Mount Bezel
Are you a little freak who wants to set up a Cat8 network at home, but the right network sockets are not (yet) available to match the frame style you have at home? Then this adapter is just right for you! For example, I have the Gira E2…
This lets you use a keystone jack in the hollow part of a spool to give you the ability to have one end buried but still usable. This lets you re-use spools, which can be helpful because PC can be harder to recycle.
I updated my popular 10" rack mount for Lenovo ThinkCentre Tiny. It adds up to two standard keystone jack sockets, so you can bring Ethernet/USB/HDMI (or whatever keystone you like) to the front of your rack. I made some additional…
There are no Keystone Mounts available for the Racknex UM-SBC-209 so i thought i design my own. Print Settings Printer Brand: Creality Printer: K1 **Supports:** Yes Resolution: 0,2 **Infill:** 100% Category: DIY
Remixed the Keystone Cap to fit @ChristianBra_1608057 's Cable Spool. Recommend printing it standing on it's side, as it makes the flanged arms stronger, I used normal grid support.
Inspired by the great designs already out there, I made this adaption with added 140mm fan and optional keystone module (to house a HDMI keystone passthrough). I found that the heat generation on the 13th gen i9 is too much and this case…
I prefer to run my printers on ethernet, but the stock metal electronics enclosure on the vcore4 does not have any great way to run and external ethernet cord. This panel integrates a keystone jack port to use a standard keystone ethernet…
This is a 10in Server Rack Project Commscope UNJ600 patch panel. I looked all over for a patch panel to fit the keystones I had on hand but none worked so I designed my own. The ports are a little tight but they work great.
A Keystone Module to fit audio jacks with ~6mm panel holes and hex nut mounting, as found here: https://www.amazon.com/dp/B01CVGD4UI or https://www.adafruit.com/product/3692 Nut is approximately 8mm diameter (flat-to-flat) and 1.6mm…
This is a replacement cover for the cable pass thru in an Airstream office desk. It has a keystone compatible socket for a keystone ethernet jack and pass through for cables. I designed this for use with my Gen3 Starlink router as I…
Print settings Should work on any ‘standard’ slicer settings, but just to share mine: 3 walls 4 top shell layers 3 bottom shell layers 10% cubic Matte PLA no supports Print orientation Print the model on its back (bumpy side facing up)
I have created an educational 3D-printable model to help children explore the function of semicircular arches, inspired by the hands-on learning approach of Montessori. Based on the Roman aqueducts, this model is my entry in this 3D…
This is a set of decora keystone wall jacks. I found that I needed a different combination of slots than what was offered already online. So I created a project with multiple plate backs. This is a simple project and much cheaper to print…
Need a keystone panel for your rc2014? This has you covered. Quick print, requires no support materials. Compatible with the Bump-Out-Box: https://www.printables.com/model/1068569-bump-out-boxes-for-the-rc2014 Source code on Github:…
This 3D-printable adapter frame is designed to fit KeyStone-style RJ45 jacks into standard wall outlet plates. It supports existing wall plates commonly used in homes and offices, making it easy to organize and expand network cable…
Remixed version of Phanden's v0.2 rear skirt model
This is a recessed keystone jack. It is pressfit into a 1" (~25mm hole) but is tapered so no need to be perfect. I ran cat 6 to the jack and then placed a keystone ethernet into it. I used a ziptie under the tab of the keystone to “lock…
2U 10" rackmount for TP-Link SG2008P swith and NanoPi R3s router with 20 keystone mounts.
A 10-port keystone patch-panel made to fit in 10-inch racks. Mix and match your keystone modules in your mini lab with this model! Updates 09 Dec. 2025: Added a reinforced version of this model. (Version 1.1) This model is part of a…
This is a mesh addon for this Voron V0.2r1 rear skirt. . I'd suggest to print this as a separate piece and glue it on with superglue. It leaves extra space around the keystone hole to avoid changing the fit of the base skirt. Example…
A modular, two-part 16 ports keystone patch-panel made to fit in 19-inch racks. Each module has 8 keystone jacks. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts.…
Blank panel with no keystones, removed sharp overhang on the bottom of the models to match skirts I had already printed
Reworked the keystone holder to work with my specific model
A raised lettering version of a keystone keychain. Uses raised lettering to change colors. You will need to add a pause to change colors at the layer change. Makes a great preasent for someone who like keystones or a fan of beer.
This is a remix of the frame inserts of https://www.printables.com/model/185966-busch-jaeger-duro-2000-frame-insert. It is made for the dual keystone adapter by @SebastianMayrhuber…
I was trying to mount a keystone jack in a unique location using a typical single gang US electrical cover, and it was much too large to fit in the space. I recreated the mounting mechanism and put it on a small disc. It holds the jack…
A 10 ports keystone patch-panel made to fit in 10-inch racks. Print A and B and slide together (tight fit) and then reinforce with some M2 nuts and bolts.
Remix of JaredC01 original JetKVM mount with 8 additional keystone modules suitable for a 10 inch rack
