ESRack - Module - BeeLink EQR6 + JetKVM + Keystone x2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I combined BeeLink EQR6 + 1 JetKVM + 2 Keystone jacks into a single 2U ESRack (by @EvilProphet) bracket
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 182
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I added to the wonderful ESRack collection originated by @EvilProphet.
I designed this module using Fusion. It fits a BeeLink EQR6 + 1 JetKVM + 2 Keystone jacks in a single 2U ESRack bracket.
According to BeeLink website, EQR7, EQRi12 and SER5 Max have similar outside dimensions and should also fit. However, please verify for yourself. EQR6 dimensions are 126 x 126 x 49 (rubber feet included). I designed it with the rubber feet included for it gives the device just enough friction to stay in place securely. I added 0.5 mm to the opening width for the EQR6 to keep from scuffing up its sides.
As you can see all devices fit perfectly. So does the whole assembly in the 19" rack.
Unfortunately, I installed both brackets into the rack before taking pics. So, the pics of the bracket, against the white background, are from one I made that had a few small errors.
ASSEMBLING:
12x M4 nuts (DIN934M4),
12x M4x12 hex socket head screws (DIN912M4x12-8.8)
2x M2x12 hex socket head screws for the JetKVM (they replace its factory screws on top when mounting)
SUGGESTED MATERIALS & SETTINGS:
Bambu PETG-HF
Default settings
Default Tree Support, from base-plate only and no support for small overhangs