10 inch rackmount - Keystones with labels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
10" rackmount for Keystones as well as label panels, combining into 1U.
- Ocena
- 5 / 5
- Polubienia
- 58
- Pobrania
- 201
- Wydruki
- 2
- Wyświetlenia
- 1397
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a 10" rackmount for keystones as well as separate accompanying panels for labelling said Keystones. The label strip can be placed above or below the Keystone panel.
Required hardware:
Screws and cage nuts that came with your cabinet, nothing else.
Current variations:
- Keystone panel for 12x Keystones
- Label panel for 12x Keystones
- Keystone panel for 9x Keystones and Ubiquiti ETH-SP-G2 (Surge protector)
- Label panel for 9x Keystones and Ubiquiti ETH-SP-G2 (Surge protector)
Labels:
There are many labels, listed below:
Network:
- Router
- Switch
- Access Point
- NAS
- Firewall
- AdGuard
- PiHole
- PiHole (USB)
- Out
- Surge Protector
Computers:
- PC
- Gaming PC
- Work PC
- Stream PC
- Linux
- Ubuntu
- Mac
- Mac Mini
- iMac
- Mac Studio
- Mini PC
- NUC
- Intel NUC
- BeeLink EQ14
- ASUS NUC 14
- RetroPie
- RetroPie USB
- RetroPie HDMI
- Raspberry Pi 0
- Raspberry Pi 3
- Raspberry Pi 4
- Raspberry Pi 5
- Home Assistant Raspberry Pi
- Home Assistant Yellow
- Home Assistant Green
Media:
- Apple TV
- Chromecast
- Nvidia Shield
- Jellyfin
- Plex
Printers (2D and 3D):
- Printer
- 3D-printer
- Prusa MK3S+
- Prusa Mini+
- Prusa MK4S
- Prusa Core One
- Prusa XL
- Bambu Lab X1C
- Bambu Lab X1E
- Octoprint
Cameras:
- Cam 1-5
- Cam entry
- Cam kitchen
- Cam bed
- Cam baby
- Cam garage
- DVR
Consoles:
- PS2
- PS2 Slim
- PS3
- PS4
- PS5
- PS5 Slim
- XBOX
- XBOX 360
- XBOX One
- XBOX One S
- XBOX One X
- XBOX Series S
- XBOX Series X
If you are missing any label, either let me know and I'll make it, otherwise I have included a blank block (which is really just a cube, but in the appropriate size) so you can make your own.
If a label is too big or too small, which might happen depending on printer and materials, you can scale it to 99 or 101% size.
Printing instructions:
Strength at your discretion. I printed with the following settings:
- 3 perimeters
- 25% infill
- Gyroid
- PETG (for heat resistance)
The labels are better printed in PLA for color coding, as they have no load on them whatsoever.
Print back or front down. You will need supports either way, but more for front down. You might still prefer this if you have a textured plate and want to match the rest of your printed mounts.
Will fit a Prusa MK3/4/Core One if you place it with its face down.