RJ45 insert (Keystone, Legrand) threaded weather resistance passthrough
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Threaded lug with cap and nut that fits a RJ45 insert. Specifically tested with Legrand branded RF45 snap in inserts.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
In theory the cap should protect the connector from dust and moisture but I have not as yet added features for an O ring or otherwise to seal the water out. I used some dielectric grease to help with water protection for now.
Printed with 0.15mm resolution using PETG, speed preset. The threads are acceptable without much work. I suggest printing with supports for the two cross bars that lock the RJ45 insert in. I printed with supports for those only and it worked out fine. The hole needed to mount it is roughly 33mm and I used the equivalent of 35mm ISO pipe threads.