RJ45 insert (Keystone, Legrand) threaded weather resistance passthrough
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Threaded lug with cap and nut that fits a RJ45 insert. Specifically tested with Legrand branded RF45 snap in inserts.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 137
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
In theory the cap should protect the connector from dust and moisture but I have not as yet added features for an O ring or otherwise to seal the water out. I used some dielectric grease to help with water protection for now.
Printed with 0.15mm resolution using PETG, speed preset. The threads are acceptable without much work. I suggest printing with supports for the two cross bars that lock the RJ45 insert in. I printed with supports for those only and it worked out fine. The hole needed to mount it is roughly 33mm and I used the equivalent of 35mm ISO pipe threads.