Counting matching models…
Introducing the Chess Rook with a fascinating passthrough illusion! This model appears to defy the laws of physics as the "male" part of the thread passes through the slightly larger "female" part. This effect is not only visually…
Printing Instructions/Recommendations 50% gryoid infill provides weight and strength so it can move through with just gravity 0.2mm layer height PLA for good finish Offset is around 0.2mm between objects - will not scale down well Print…
This is the simplest version of the famous Passthrough Fidget. I have added both STL and GCODE files for the first part, and second part of the fidget, and a GCODE file for the entire fidget. Enjoy!
I needed a nice way to get a hole in my rack, to get power from the front to the back of the modules.
This is the first of my series of fidget toys!!!! It is a simple passthrough fidget that has a tolerance of 0.6mm, so it should print great on most printers.
This is another spiral passthrough fidget. The center can pass through in either direction. Do not scale down and I recommend not to simplify the model. It stands 3.375" (85.725mm) tall. The model in the picture was printed out of ABS…
Of everything I have printed and designed, this vortex passthrough still stands out to me. The design is easy, it is very functional, and it uses a low amount of filament. Send me your comments, questions, makes, or requests. I always…
I put all twelve of my BEST passthroughs into one download with this V1.1 set. The set covers the original BEST passthrough, the square pyramid, triangle, 4D octagonal pointless, octagonal vortex, rectangle, circle, cube, pointless…
XY Size Compensation on the Inner Piece at -0.4mm
This triangle version takes the BEST passthrough idea into a three-sided shape, and its structure runs smoothly once the pieces are set up right. It prints with a structural design that helps the print go smoothly, but it does help to…
XY Size Compensation on the Inner Piece at -0.4mm
I wanted to have an "impossible passthrough" style model that is small so I can print one for everyone in a group, as a surprise present is sturdy works well has maximum possible detail for the size both parts should seem like a full size…
XY Size Compensation on the Inner Piece at -0.4
Model Description Introducing the passthrough Easter egg, a special 3D creation that combines the charm of a festive decoration with the practicality of a fun fidget toy. This model allows for endless creativity with customizable color…
I made this one as my favorite shape in the BEST impossible vortex passthrough series. It is a square pyramid, and it comes in two parts. The inner piece slides through the outer piece, twisting as it goes. That is the whole trick, and it…
XY Size Compensation on the Inner Piece at -0.4mm
XY Size Compensation on the Inner Piece at -0.4mm
The Design After something different? Here we have the Vortex Shift! This is the most confusing and satisfying yet! Whilst i designed this some months ago i took some time to refine it and get it perfect. Import note: Whilst fully…
XY Size Compensation on the Inner Piece at -0.4
XY Size Compensation on the Inner Piece at -0.4mm
Get ready to relive your childhood dreams with this super fun, kinetic spiral toy! This updated version of the classic Stackable Impossible Passthrough adds an exciting new twist - you can now place a spring (like one from a ballpoint…
XY Size Compensation on the Inner Piece at -0.4mm
This one takes my octagonal pointless passthrough and adds a semi-4D edge design to it. The unique edges go into an easy and fast passthrough print. A bold color scheme helps it stand out, since a plain one can look dull. It is based on…
Yet another passthrough impossible cone fidget, or whatever these things are actually called. I was teaching students how to make them in Onshape this during a summer school course I teach on 3D printing and design, and I was inspired by…
Dive into the world of Pokémon with my newest 3D model, "Low Poly Snorlax - Passthrough." This amazing Snorlax statue, originally designed by Agustin Arroyo, has been enhanced with a stunning passthrough effect to give it an extra magical…
XY Size Compensation on the Inner Piece at -0.4mm
XY Size Compensation on the Inner Piece at -0.4 Smaller yet sturdier Fits on standard size chess board
XY Size Compensation on the Inner Piece at -0.4
XY Size Compensation on the Inner Piece at -0.4mm
XY Size Compensation on the Inner Piece at -0.4mm
I've turned the best Halloween candy ever into an impossible passthrough fidget! Print Settings: 0.2mm layers, 10% infill, and change colors at layers 165 and 330 Happy Halloween! Are you interested in selling your prints of my designs?…
XY Size Compensation on the Inner Piece at -0.4mm
This rectangle version stands out in my hand because of its straight sides and the way the inner piece runs through it. It is still the same kind of fidget I enjoy, just in a shape that looks sharp on a desk. It works with my Triangle…
I made this circle version because the BEST impossible vortex passthroughs are my favorite designs to print and play with. The shape is simple, it uses a low amount of filament, and the two pieces fit together cleanly. Try throwing both…
Vortex Passthrough Spiral Illusion Toy SIZE LARGE - H110mm x 52mm Diameter SIZE SMALL - H67mm x 36mm Diameter - Print with standard settings and no support. - Maybe adjust speed towards the end layers so PLA can cool down for next layer -…
I printed with PLA. DO NOT Scale it won't work. No Supports
The rounded corners are what I notice first when I pick this one up. There are nearly no sharp points on it at all, and that soft edge is the whole point of the pointless version. It sits in the BEST series alongside my other vortex…
Impossible Passthrough Fidget Toy – Mind-Bending Illusion | No Supports | One-Piece Print Description: Challenge the eye and the mind with this Impossible Passthrough Fidget Toy, a clean geometric illusion designed to look like something…
This one is the simpler shape in the series, and that is part of why I like it. It is a simple print, and once it is off the plate it makes a fidget I can keep turning over for hours. The pyramid form is easy to follow with my hands, and…
I recommend printing with 0.16mm layer height, and I enabled variable layer height for my print.
hi it works really well to print enjoy!!
I made this cube to give you a choice inside. One inner piece has a flat edge that sits smoothly against the outer part, and the other is the standard inner piece, where you can see the rings from outside. Colors matter here. I pair…
Rather small model with forgiving tolerances so most printer should be able to print it. Should print fine at 0.20mm. Please share your makes.
XY Size Compensation on the Inner Piece at -0.4mm
I was exploring Impossible Passthrough structures and decided to turn the idea into a Christmas-themed piece. The core looks like a delicate snowflake, and the side reveals the profile of a Christmas tree. When I designed it, I definitely…
I printed this one for Halloween, and it stayed out long after. The pumpkin shape makes it a decoration first, and the vortex inside gives it something to play with. Color is where it comes together. I print the pumpkin orange and the…
This model will allow you to pass through and mount a Garmin Striker 4 transducer to a Pelican Catch 110. Credit to user_174422861 On Makerworld for the original model and creation 0.2mm layer, 2 walls, 80% infill PET-G Use supports for…
I don't know about you, but most of the passthrough models I find to print are not toleranced well. Look no more! These are toleranced to print with no additional settings and work off the print bed!! Please post makes! Suggested layer…
All of my passthrough fidgets are comparable with eachother so check out my other designs.
Quick Connect with passthrough nut passthrough_ptfe_nut enclosed_ptfe_holder A Quick Connect nut and holder/screw that can be fixed on for example a dry box. There is no space for filament to stick out in the PTFE-plug-quick-connect…
The twist is what makes this one stand out. This is a super twisty version of the popular passthrough type. A good color scheme makes the twisting shape easier to follow, and it adds to the fidgeting too. Print Settings: Infill: Higher…
Nine sides, no sharp points, and a twist that keeps passing through. This one is a fun fidget and a straightforward print. It has nine edges, and I smoothed them all down for a better, smoother look. The modern shape and extremely rounded…
Introducing the Passthrough edition of the Rugged Container. This piece allows you to have extra space and works with all parts of the container system. You can mix and match for the ultimate setup. Use the 3MF file for the best results.…
Right Side - RaspberryPi 4 Rack Mount No Screen No Supports With Or Without USB Passthrough Left Side https://www.printables.com/model/211251-19-raspberry-pi-34-rackmount-with-13-oled-screen-p Shout out to Freddy for the amazing model!…
This is a simple, cactus passthrough! Print for lots of fun! Filaments used for both the body and spiral: Green PLA by Creality and brown PolyTerra PLA by Polymaker. Main settings: .2mm layer height. A brim is used for the spiral. I used…
An impossible passthrough fidget in the shape of a ball
Wavy Passthrough Fidget – Smooth & Satisfying Tired of the same old passthrough fidgets? This one breaks the mold with a unique wavy design that feels as good as it looks. Unique Shape – A fresh twist on the classic passthrough fidget,…
I kept coming back to the BEST Vortex Series when I made this one, because the smooth, rounded shape is what makes it fun to handle. It is a super easy print, with a lot of filleted edges and smoothened corners, and it looks just like the…
Ahoj všichni, i letos přicházím s velikonoční dekorací – ale tentokrát v ještě lepší a praktičtější verzi. Model je upravený tak, aby byl co nejjednodušší na tisk a zároveň perfektně seděl do květináče. Jedná se o tři elegantní vysoké…
No brim needed but I recommend glue on the print bed. 8% gyroid infill Needs support. I used tree supports from build plate only. Remove small overhangs checked.
Some simple shapes glued together in blender to make cool passthrough fidgets.
Right Side - RaspberryPi 3 Rack Mount With Or Without Passthrough Left Side https://www.printables.com/model/211251-19-raspberry-pi-34-rackmount-with-13-oled-screen-p V2 is now stronger, also includes a version without pass threw. If you…
Brim: On for inside piece Supports: Off Infill: 15-20%
Fun and satisfying fidget toy
Update 9/28/2024 – Slightly increased gap between parts to decrease friction. Passthrough illusions are really cool, and a fun way to add multiple colors to many items. In this case, I applied the concept to some planters, and I am really…
A simple passthrough fidget toy/thing that should be relatively easy to print, with pretty wide tolerances. I print mine at a layer height of 0.2mm with a 0.4mm nozzle (on a modded Ender 3 S1 Pro). The one in the picture is an amalgam…
The Impossible Twist: Mini Hourglass Passthrough The Ultimate Desk Companion Fidget toys should be smooth, satisfying, and beautiful to look at. This mini hourglass passthrough delivers all three. Watch as the inner core glides…
A triple helical passthrough of the Rock Johnson, with even more turns!!! You must print the entire object with automatic supports (also inside, not only in the printing plate), otherwise, it will be difficult to print it. If you decide…
Edit : Wow! within 20 minutes there are already 2 downloads and 2 likes... 😲 wow. Thanks to whoever downloaded and liked this.
a simple passthrough for your reverse bowden into a lack enclosure. Drill a 10mm hole and glue it in at the top. The PTFE tube should be a friction fit if your printer makes holes to size.
Cable passthrough specifically designed for MK4 xLCD connector dimensions. Inner dimensions (window) are 35x15mm, outer dimensions (for cutout) 37x17mm . xLCD screen cable fits with diagonal movement, for straight passage upscale model a…
A triple helical passthrough of a Moai. You can print the entire object (don't forget to configure the retraction and flow settings), or do it in parts. If you print in parts, as I did, I recommend resting the parts on the back sides to…
The whole model is about 3.346 inches tall, and about 1.966 inches wide. Estimated print time is about 2:30:00, it will not need supports.
Please like and post makes also check out my other designs.
Sweet Passthrough fidget toy.
A triple helical passthrough of the Rock Johnson, now with more turns! You can print the entire object (don't forget to configure the retraction and flow settings), or do it in parts. If you print in parts, as I did, I recommend resting…
Just having fun with the formula. This version is meant to have the inner spiral ball trapped inside the outer cylinder. Print the ball first and then while printing the outer cylinder pause the print and add the ball before it finishes.…
This is a laser cut pass-through cover fitting for OMTech 60x90cm 8B69 The laser has 2 openings for fitting large pieces, which is quite dangerous. With this cover, you can close the machine and make it save. The cover is mounted with…
A cone passthrough fidget that I made using Onshape. Any feedback, suggestions, or likes would be greatly appreciated!
Pretty much self explanatory. Print one of each and enjoy. More in the series coming out soon!
A triple helical passthrough of the Rock's Johnson head.
This flower pot comes with a unique twist! Meet the impossible pass through flower pot. It is inspired by the passthrough trend that has swept the 3D printing world. The external piece spirals around the internal piece. This is a fun way…
I designed this model after my GMRS magnetic antenna cable kept getting crushed by my car door, even when I routed it through the softest locations. Specs: Designed to fit 0.20” Dia. coax, but can be scaled to fit whatever size you need…
A fun little fidget toy. Nice to fiddle with when you should be working. Prints without supports. If you make it, please post a print!
This is a small PTFE tube collar for passthrough tubing. I have filament above one of my printers on a wood shelf, and directly feed the filament down into the printer from above. I drilled a 4.5mm hole in the shelf which takes a PTFE…
This is a fun and satisfying fidget toy for endless fidget fun.
Remix of ZachSB's Closed Shelf for the modular rack system. I have a KVM switch that has 1 output which is permanently wired to my Unraid system but I have other components in my rack that I need access through HDMI from time to time. The…
The original version will work along with AF installed but it introduces a bend and longer PTFE length that could add unnecessary friction to feeding filament. In order to avoid this, I placed the pass through holes closer to either end…
Comes with two different twist options; form fitted and round. Use a bit of glue on the print surface to ensure good adhesion. Printed with 15% Gyroid.
Dive into the world of Pokémon with my newest 3D model, "Low Poly Snorlax - Passthrough." This amazing Snorlax statue, originally designed by Agustin Arroyo, has been enhanced with a stunning passthrough effect to give it an extra magical…
This is a model where you have to twist two parts into each other to get the final shape, enjoy! Model Might be too small so scale it up in your slicer if needed!
Passthrough rabbit easter egg bunny with articulated legs. Prints better at 0.16 layer height. If you download it, please like.
vent for my 3d printer. Eventually I wanted to hook it up to have active ventilation. Currently just covered. Part of https://www.printables.com/model/1263333-3d-printer-enclosure-parts
TPU feedthrough with a PC4-M10 to pass through with PTFE tube. With this you can put the roller on top and feed directly down to the extruders. Also included with a template to measure out placement. You may need to grind the large hole a…
Introducing the Passthrough edition of the Rugged Container. This piece allows you to have extra space and works with all parts of the container system. You can mix and match for the ultimate setup. Use the 3MF file for the best results.…
This model will allow you to pass through and mount a Garmin Striker 4 transducer to a Pelican Catch 110. Credit to user_174422861 On Makerworld for the original model and creation 0.2mm layer, 2 walls, 80% infill PET-G Use supports for…
This is a small PTFE tube collar for passthrough tubing. I have filament above one of my printers on a wood shelf, and directly feed the filament down into the printer from above. I drilled a 4.5mm hole in the shelf which takes a PTFE…
I added mounting holes for magnetic pogo-pin connectors . If you plan to use them, I recommend buying the versions with the wires already soldered, doing it yourself is difficult. If you only have the bare connectors, you can push the…
I wanted to pass the cables of my Prusa SL1S and CW1 through the 34mm thick IKEA Linnmon desktop I have that works as my resin printing station. I had a 35mm hole saw and decided to use that and make this passthrough plug to make the end…
