1 / 2
Minisforum MS-01 2U rack mount 10" & 19" (with fan & keystone) — zdjęcie 1
1 / 2

Minisforum MS-01 2U rack mount 10" & 19" (with fan & keystone)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Inspired by the great designs already out there, I made this adaption with added 140mm fan and optional keystone module

Ocena
4,8 / 5
Polubienia
93
Pobrania
1210
Wydruki
4
Wyświetlenia
8684
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Inspired by the great designs already out there, I made this adaption with added 140mm fan and optional keystone module (to house a HDMI keystone passthrough). I found that the heat generation on the 13th gen i9 is too much and this case really needs more airflow. Recommended is a 140mm fan optimized for static pressure, such as the Arctic P14.

Update 17-10-2024

  • Added 10" rack mount version

Print recommendations

The models print without supports if your bridge settings are somewhat tuned; print the cage face-down.

PLA is possible but not recommended, since the MS-01 can reach 60C easily, ASA, ABS or PETG is recommended.

Use 4 walls, 40% (cubic) infill, 4 top and bottom layers on a 0.4-0.5mm nozzle.

Tagi