Minisforum MS-01 2U rack mount 10" & 19" (with fan & keystone)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inspired by the great designs already out there, I made this adaption with added 140mm fan and optional keystone module
- Rating
- 4.8 / 5
- Likes
- 93
- Downloads
- 1,217
- Makes
- 4
- Views
- 8,763
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by the great designs already out there, I made this adaption with added 140mm fan and optional keystone module (to house a HDMI keystone passthrough). I found that the heat generation on the 13th gen i9 is too much and this case really needs more airflow. Recommended is a 140mm fan optimized for static pressure, such as the Arctic P14.
Update 17-10-2024
- Added 10" rack mount version
Print recommendations
The models print without supports if your bridge settings are somewhat tuned; print the cage face-down.
PLA is possible but not recommended, since the MS-01 can reach 60C easily, ASA, ABS or PETG is recommended.
Use 4 walls, 40% (cubic) infill, 4 top and bottom layers on a 0.4-0.5mm nozzle.