53 modeli
I have a Dell Optiplex 7050 Micro with no faceplate and no power button. So I rebuilt it. Optimized print profiles for Bambu Lab printers available here:…
I modeled the MiniPC motherboard of GenMachine. It was created by CAD Kim, an admin of the MiniPC Gallery on DC Inside
Compatibility: Standard 35mm DIN rail (TS-35) Mounting: Secures Mini PC using M3 screws (8mm length) Mounting hole pattern: 70mm diamond (rhombus)
I designed mounts for my minipcb2 board case . The board project is here Minipcb2 . mount for tc40 tripod mount for horizontal tube mount for vertical tube Print settings Material: PETG Layer Height: 0.2 Infill: 40% Assembly 1pc rc…
E N G L I S H Remix of ChristophB's mount for the HP ProDesk 400 G2. But can be used for ALL Mini-PCs* with Vesa 100 mount. I wanted to hang the computer in such a way that no dust falls on the ventilation openings, even if it is sucked…
A holder for minisforums minipc to be attached behind the monitor. Quick solution to hide cables behind the monitor
I have a Dell Optiplex 7050 Micro with no faceplate and no power button. So I rebuilt it. Optimized print profiles for Bambu Lab printers available here:…
This Mini PC stand was created specifically for the Optiplex 7000 but may fit other models. The heart is no longer on the model, that was the prototype.
Extend a minipc to house an additional fan / harddisks. I used threaded rods to tie it all together.
Telescope Tripod leg clamp and holder for MELE Quieter MiniPC. Compatible tripod leg diameter: 40mm (Eg. SkyWatcher steel tripod for EQ-3, EQ-5, HEQ-5) Parts needed: 2pcs. M3*3*5mm brass insert 4pcs. M3*6mm screws. + + + Note: I remixed…
Telescope Tripod leg clamp and holder for Fodenn F30 MiniPC. Compatible tripod leg diameter: 40mm (e.g. SkyWatcher steel tripod for EQ-3, EQ-5, HEQ-5) Parts needed: 2pcs. M3*3*5mm brass insert 4pcs. M3*6mm screws. This MiniPC has a power…
Support/stand for minipc GEEKCOM. Ultra light for better cooling. PETG or PC recommended because of heating. Freecad file included to suit your kneeds. If you download it, please like.
This is a cooler mount for a Mini PC Acer Veriton N4640G. Needs M3 heat-set inserts where the red dots are. Using original bolts from pc. You need an angle grinder to cut the original screw holes in the bottom casing. Cooler ID-Cooling…
For MINISFORUM UM690 Slim Mini PC 13cm x 13 cm x 5.6cm, perfect ajust. 2 models - Complete closure - Semi closed + clip. Printed in PLA without supports, 0,15 layer height.
E N G L I S H Remix of ChristophB's mount for the HP ProDesk 400 G2. But can be used for ALL Mini-PCs* with Vesa 100 mount. I wanted to hang the computer in such a way that no dust falls on the ventilation openings, even if it is sucked…
A holder for minisforums minipc to be attached behind the monitor. Quick solution to hide cables behind the monitor
Zotax Minipc Wallmount bracket I use a zotax mini pc for my home assistant and wanted to have i mounted to the back
I have just added chamfers and a recessed slot for the M3 bolts which go onto the backside of the Mele Quieter 2 (cylinder hex head). All the rest per original.
This is a fitted 10" rackmount for the Bee-Link EQ14. It has cutouts for ventilation, and a bottomless design to accomodate the router without going over 1U in height. Required hardware: Screws and cage nuts that came with your cabinet,…
This is a fitted 10" rackmount for the Bee-Link EQ14. It has cutouts for ventilation, and a bottomless design to accomodate the router without going over 1U in height. Required hardware: Screws and cage nuts that came with your cabinet,…
I remixed a Mele miniPC holder to add a support bracket for the new SVBony SV241 mini power box and USB hub. The holder can be mounted on any Vixen/Losmandy/flat bar with 2 M6 holes spaced 20 mm. The Mele miniPC is inserted in the slots…
For the mini-pc, it is so difficult to keep the switchbot attached. I made this to keep it on. This will allow you to turn on/off using switchbot. Short Version need some additional support. Long version can stay on.
Better MiniPC shelf for 10" rack. Also Keystone faceplate and blank with logo
Fan module designed for a HP T630 terminal. What you need is: 1. Two 40mm FANs. Im using 40/28mm 12V. 2. W1209 Cheap thermostat 3. M2/6 screws 4. 12V DC power supply Print with no supports. You can find the propper model orientation on a…
This mounting bracket provides a convenient way to mount the Beelink MINIS 12 PRO mini PC—or similar 104L x 116W x 40H systems—to an equatorial mount, wall, desk, equipment rack, or other suitable surface. The bracket features a mounting…
Plate 2U for mini pc GMKtec 129,5x129,5x55,1mm, includes 2 keystone for usb, 1 for HDMI and 2 for LAN/WAN. In one picture you can see i had problems with some overhangs, but was my fault with supports, but if you want performance this…
A bracket for mounting a mini PC under the table. This assume the mini PC has VESA compatible holes.
1U 10" adapter to integrate a Geekom Mini Air12 into the server rack. I printed it using the 0.20mm, SUNLU - PETG profile without any supports.
The bottom cover is open (without a solid base) with feet for improved ventilation, which reduces the overall case temperature. The feet have notches designed to hook onto the bolts of a VESA mount. I was off by a couple of millimeters on…
This is a shelf to allow you to hang a Lenovo M93P on a Honeycomb Storage Wall.
These are frame clips to attach a W5 Pro Mini PC to the side of a 3D printer. I've included clips for the Anycubic i3 Mega and the Monoprice Maker Select. The clip is designed in a way that the Mini PC can be removed from it easily enough…
Mele Mini PC + SVBony Power Hub Bracket For 30 mm tripod center column with removable end cap (required for installation) Compatible with photographic tripods that have a 30 mm diameter center column . Secures a Mele Mini PC and SVBony…
This Mini PC stand was created specifically for the Optiplex 7000 but may fit other models. The heart is no longer on the model, that was the prototype.
Dies ist ein Gehäuse für den Geekom MiniPC A5 mit dem einsteckmaßen 117x112x39 mm, habe es für mein Wohnmobil entworfen, es kann aber überall montiert werden. In der dargestellten Form ist es ohne Probleme Druckbar. Hoffe ihr habt auch…
I am using M3x10mm SHCS for this design. You should be able to use longer (maybe 20mm?) since it threads into a thru hole.
This is a MiniPC hanger with UNIVERSAL VESA FIT mounting patterns for the Berlebach planet tripod.
This model is a housing for the OnStep MiniPCB2 Controller board using the Teensy 3.2 or Teensy 4.0 arduino board. More details regarding the electronics can be found on the OnStep wiki at https://onstep.groups.io/g/main/wiki/8768 OnStep…
I made this to as a small standalone terminal for a mini pc I am developing interactive displays with but it can also be used as a small PC for raspberry Pi's or even as a second monitor. I designed all the parts to be printable on most…
I designed my minipcb2 board case for OnStep. The board project is here Minipcb2 . The case has 2 holes on the back side for various fasteners with a distance of 30 mm ( mounts ). Print settings Material: PETG Layer Height: 0.2 Infill:…
Holder for miniPC maibenben PCJ4/M1T/GMK Nucbox S without holes.
After making my original ER7206 vertical stand, I decided I needed some for other devices, so I recreated the model to be fully parametric in Fusion 360. The minimum you need to create a new size is the depth and thickness of the device…
Extend a minipc to house an additional fan / harddisks. I used threaded rods to tie it all together.
Print with PETG or other material that is more temperature resistant, at least for the Top piece, since it is hit by the fan exhaust. In the slicer (Cura), I set Top/Bottom Layers to 0, Infill Multiplier to 2, and Extra Walls to 2. Should…
Print two of these brackets if you have a MiniPC with the same aluminum casing profile used by many vendors, similar to the one popularized by Topton, as shown in the picture. Before downloading the model and printing, please measure your…
This set contains a vixen dovetail bracket to attach to the MiniPC (Original source of bracket model: https://www.printables.com/model/821544-mele-quieter-3c-vixen-dovetail-mount), a tripod mount to accept the dovetail, and a desk stand…
The original case of my Firebat AK2Plus MiniPC choked the SoC to death, so I stripped everything I did not need and started working on a case alternative. This is the first stage of this project, a minimalistic baseplate for the AK2Plus…
This is a desktop stand for the MELE Quieter. I made it for the version 2D, but probably fits the newer ones too as they are the same size. (The v4 was the newest at the time of uploading)
Designed for quick fitting, it is sturdy enough for my 900gm Minix NEO Z100-0dB fanless PC. Hole spacing is 75mm. My mini PC comes with a metal plate which I bolted to the frame, the PC just slides on. Printed in PETG. The thread has…
I have attached the SCAD file as well, so You can fine tune it to your needs. It should hold any MiniPCI card, like modems, not just WiFi.
