Liczymy pasujące modele…
Reparaturteil des originalen Auslösehebels für die Füllstandsanzeige des Auffangkorbes. Etwas verstärkt im Vergleich zum Originalteil. Empfohlenes Material: ABS oder PETG. (PETG hielt zuletzt ca. 3 Jahre bei häufigem Gebrauch des Mähers)
Cooling fan mount for a Arrma Raider rc buggy. - 35x35mm fan
Stand to mount a Thermaltake PR22-D5 reservoir/pump combo to a 140mm fan (or fan mount). The long axis of the reservoir is offset horizontally from the axis of the mount points, this being designed for mounting to the bottom fans of my…
These are parts to make a ventilation system, you just need an 80mm pc fan (I use a phone charger to run it), 80mm diameter ventilation pipe and some hex-nuts and bolts for it. I use it for my elegoo saturn but also for my fdm printing…
The Screaming Magikarp, the perfect picture for every pokemon fan with a sense of humor, the picture that will make every elderly person you know question your taste in decor, Category: 2D Art
Smoothed and fancied remix of this light switch lock. https://www.thingiverse.com/thing:243827 Sorry about the bad quality of my own print, I'm still calibrating it in a new environment. Lay flat and use tree support for the best results…
Adapter for 5015 5V fan to round pipe. Sized for 10mm ID PVC piping. Epoxy or glue in place Decrease layer height for better quality. Print nozzle facing down to eliminate support requirements.
This simple fan mount attaches a 5015 blower fan to 2020 or 1515 extrusion frame. I prioritized making the whole assembly thin and compact while still allowing the fan to swivel (nearly) 360 degrees. You can use this model to improve…
I used 3M double sided tape to mount on the fan. Printed in PLA 210/60 20 infill, no support.
Adapter to mount 2 40mm fans to Nvidia L40 GPU. Fans are mounted by M3 bolt directly to the plastic body. Adapter is mounted with original screws.
Adapt your 100mm (4 inch) air duct to a 150mm (6 inch) duct, with option to add an inline 140mm PC fan. To install: Print one of each part Insert M3 threaded inserts into the 4 outer holes on each side of the middle piece Use four anti…
Fancy bracket for wifi AP or whatever would fit. To attach to the wall. The beams look like they are coming out of the wall due to a collapse. Print Settings Printer Brand: Creality Printer: CR-6 SE **Rafts:** No Supports: Yes…
Qidi Plus 4 Rear Cover with the choice of different fan sizes in 60mm, 80mm, 92mm, 120mm Printer settings with ASA are with my printer. Your settings may differ from these. Material ASA (Qidi) HotEnd Nozzel Temp: 270°C Bed Temp: 105°C…
This is a tool board protective base with a fan mount for cooling the Orbitool tool board mounted to a Orbiter2 extruder. I remixed it to support a 4010 fan and the umbilical cable. Printed in ASA 5 walls, bottom and top. Orca 2.2.0 If…
Deckel für Netzteil mit leisen Lüftern Der Unterschied ist enorm, die Lüfter kaum noch hörbar. Umrüstung auf 12V Lüfter 1x Original Anycubic Netzteil Lüfter 1x AAbCooling Slim Silent Lüfter 80mm x 10mm (…
I wanted to use Noctua's 5V PWM fans with my LDO Leviathan board, and in order to save space on the DIN rails, I wanted to use the Wago mount designed by Dr-Info. However, the mount only holds 2x Wago 221-413 terminals whereas I needed a…
I've been using this filter for ages now, and completely forgot to upload the remix I realy like The Filter, but not the lid, as it's a PITA to keep in place as is. So I added locations for 2 threaded inserts and corresponding holes in…
3D-printable replacement blades for the extruder cooling fan. The cooling fan placed in front of the extruder's heat sink has the important job to keep things cool above the hot end. By accident and a bit of bad luck the fan blades can…
lock designed to prevent patio umbrella from spinning around when tilted to block the sun. designed for a 37mm umbrella pole. May work for sizes ranging from 36-38, but not tested. If you found this useful, please donate what you think it…
Filament : Prusament petg. PETG 0.20mm. 15% Infill : Gyroid. Nozzle : 230c. Bed : 85c. Support : None. Enable Ironining. All top.
I have remixed the ender 5pro skirts to fit 50mm fans for a cooling solution for the electronics enclosure. Use heat inserts in the centre part of the skirt for the fan.
Part cooling duct for biqu h2 and biqu microprobe mount. Need 2x m3x3x3.5 heat set inserts for fixing the 5015 fan and 2x m3x3x3.5 heat set inserts for fixing the probe. Added v2 for less supports when printing. Apply some glue to…
Designed this for universal fit 120MM fans Has provision for mounting temp control board to the side Uses basic 5mm thru holes for mounting to enclosure panels
120mm, single screw fan mount for spool boxes and desiccant chambers. Version 2 has a domed center which supports the outer tower mounts better. Print with anything, cubic infill 20% or more. Please leave a “Like”, it helps me. Thank you!
This is a customizable variant of my Magnetic Phone Mount for the Fanatec DD1/DD2 sim racing wheel bases for wireless chargers such as Apple MagSafe adapters or any other round Qi wireless charger that is designed similarly. What you…
The ammo belt is intended to be glued onto a flexible strip (paper, thin soft plastic…) and broken into the desired shape.
Basic BigTreeTech ADXL345 accelerometer to mount to the 4010 axial fan that comes with Creality Stock Hotends. Screws Needed: M3x4 (Mounting the ADXL325) M3x14-20 (Possibly even bigger. This depends on your current setup. I needed M3x16.…
Made by uploading my art to Lithophanemaker.com Art Based Off Greg Capullo Cover
Update 11/15/24: It was made aware that I did not include the PTFE connector that was used/fits with this adapter. Please see this amazon link:…
Reparaturteil des originalen Auslösehebels für die Füllstandsanzeige des Auffangkorbes. Etwas verstärkt im Vergleich zum Originalteil. Empfohlenes Material: ABS oder PETG. (PETG hielt zuletzt ca. 3 Jahre bei häufigem Gebrauch des Mähers)
The stepper motor drivers on my Qidi X-Plus 4 were reaching temperatures of up to 100°C. I mounted a 40mm x 40mm radial fan with a 3D printed mount. This reduced the temperatures by around 30-40°C. You will need a 40mm x 40mm radial fan…
Simple replacement 90mm fan cover for mini pc barebone cases.
requires 4 4mm heat set inserts to mount the 120mm fan and 4 15mm m3 standoffs between the block and the printed part. Longer standoffs would be fine, but 15mm is the minimum. attach the printed part to the standoff with 10mm m3 bolts and…
This GPU sag bracket was designed to fit between any two fans. This makes it perfect for many fish tank cases, but it was designed specifically for the Antec C5. The base secures into the screw alcoves of the fans and brings my Galax RTX…
Use slow speed, .2 or .1mm layer hight for best results. Overhang settings 230% width or supports.
UPDATE Dec 21,2024: I was asked to provide a dual 120mm edition . I have uploaded the files (fanstack120 + tpu-gasket120), but i have not tested these myself . If someone can offer some feedback, that's be awesome ! The screws to mount…
Модификация системы обдува 3D-принтера Flashforge Adventurer 5M Modification of the Flashforge Adventurer 5M 3D printer blowing system Печатать без поддержек и отключить замедления на внешних периметрах Print without supports and disable…
I designed and 3D-printed a custom fan mount for the Tesla P40 GPU, addressing its passive cooling limitations. The mount securely attaches to the GPU, allowing for the installation of an active cooling fan to improve airflow directly…
All the mounts I could find mounted the fan too close to the underlying surface when using the original feet, so I had to design my own.
Case that fits an Arduino UNO with the CNC Shield V3 and a 60mm cooling fan. The top part just snaps in place and is easy to remove to get to the arduino underneath. The fan is mounted with two screws from the bottom.
Remix of arbornoctis' excellent model. I redesigned the mount in Fusion 360 to fit my iPad Mini 4 with sleeve. Added the logo for fun :)
I remixed the original version of the Noctua's High Efficiency Fan grill to allow use on 40mm fans. I made this to make 40mm fans slightly quieter. If you're running a 40mm fan upside down, I would highly recommend printing the grill with…
Upper and lower fan wheel part separated, so printing won't warp the total, glue together to form one part
Custom use case fan duct for this great fan to ssd mount, by MLoeko . There is both spacer pillar and the wall file. This lets you mount a full set of drives clamped between two sets of the SSD mounts using threaded rod in the fan…
120mm auxiliary part cooling fan designed for a ZeroG Mercury One.1 370 (Non-Hydra) that may also work for Ender 5 and 5+'s. The ducts have optional heat set inserts for strength. You need to close the holes if you don't use the inserts.…
stuff needed: possibly a drill to drill the mounting holes on the 4010 turbines to fit M3 bolts, because I can't be bothered buying M2.5's; 8 M3x6 bolts, possibly M3x8 with a washer; 8 6x2 or 6x3 magnets; superglue to secure the magnets;…
Falcon2 Pro Collection I had smoke creeping out the crack between the exhaust hose adapter and the side of the enclosure as well as the hose connection where the wire wraps. I replaced the fan grill with this foam gasket cut from 2mm…
I recently purchased the Mosquito for Prusa MK3S+ upgrade kit from Slice Engineering, that comes with the ASA printed extruder parts. On my previous setup, I've been quite pleased with the Delta-P print fan duct and wanted to use it with…
This a new 5015 intake for the delta P duct v2r22 addon with a cone airflow entry. Did not like like the existing ones very much so I made this. On a bench test the inside cone improves cooling airflow by 3-8% (depending on cooler speed).…
PCIe bracket for your PC case to mount a 140mm FAN to cool down your PCIe expansion cards.
This is a mount for a 3010 fan meant to connect to, and cool, BTT EBB36 toolboards with some metal standoffs. This was designed for use with the Calamity Toolhead and this EBB36 mount . Hardware Metal standoffs, 25mm+ (depends on how…
It is now possible to mount a Bambu A1 hotend, making it easy to change nozzles. The settings on the Prusa MINI+ side can be used as is without any modifications. There is also an STP file, so someone please create a cutter mod and Remix…
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl Key Features: -Non-slipping 16mm clamps with TPU inlay -Rotatable in three…
I modified a 40mm shroud, so that it can carry 60mm fan with a 4020 blower for part cooling. DEAD quiet with half the rated fan voltage (the bigger fan manages to cool it on lower RPMs) Printed with PETG, infill about 70% (its just around…
Features: Fan Mount: Includes a dedicated mounting point for a 50x50mm cooling fan on top, ensuring efficient airflow to prevent overheating during prolonged use. Easy Access: Provides cutouts for all essential ports, connectors, and…
Voron exhaust fan block off plate, I used this when I went to CPAP- Pause at layer 15 for color change -x4 M3x8 screws
Figure size: 59,14 x 46,82 x 110 mm I recommend making your own stand Supports are necessary Illustrative pictures & gifs Possible re-make for your own, non-commercial purposes My private AI model without textures is available for you for…
For all of you who might feel that your stock TEVO tarantula's hot end is inadequate in that it doesn't have a part cooling fan nor a mount for an inductive sensor, than these parts are for you. The fan vent holds a 5015 fan and provides…
This is a surprisingly simple-to-print hot end fan mount upgrade for the TEVO Tornado. It uses the original two fans that are already on the stock hot end and is very simple to attach onto the X-carriage. It has several advantages over…
USB Fan Controller Case with two screw mounting holes 40mm apart. File includes two Base versions and the Top , print as required. One version with centered hole lugs that needs to be assembled after mounting and another with offset hole…
Here is the film logo as seen in the Teaser Trailer and advertising art for The Fantastic Four- First Steps.
Hot air can leak through the vents when printing at high chamber temperatures like ABS/ASA. This simple cover helps prevent escaping air. Uses 4 6x3 magnets. I added step file, so you can change it to fit other (bigger) magnets.…
This is a direct edit of the “__raspi_module_1_01-SIF_OLED.stl” module from the Modular Snap Together Raspberry Pi Case , and the only things i changed is 1: I made the OLED cutout bigger to allow you to mount it forwards or backwards,…
Snap-on filter holder for Parkside soldering fan (PARKSIDE Löthilfe mit Halteklammern ). Work in progress.
I needed a low profile fan duct for my HBA card inside my space constraint hp EliteDesk 800 G4 SFF so I created this. It uses an 4010 radial fan (mostly found as part cooling fans for 3d printers). As I only had a 24V fan laying around, I…
This is a remix of the popular Raspberry Pi 4 case, modified for rack mounting on either the left or right side, with optional support for a 40mm fan. Required Hardware: 3 M3x18 screws to secure the top of the case to the bottom.…
The fans work well with 5v usb ports and reduce CPU temperature from 98c to 60c but quite noisy. I print this with PETG and the 2 holes on the top turned out not good (without support). If you want to print without support, rotate 90…
Fan grill for a 120mm fan based on Apple PowerMac G5 / Mac Pro (2006-2012) design. Perfect for a PowerMac G5 case converted to ATX.
This fan guard will fit over any standard 30mm X 30mm fan, such as from Protek, Yeah Racing, etc. It may require longer screws, but will protect the blades from being hit and also from having the entire rotor fall out during a crash. I…
This is an easy mount for fans or a radiator on the left side of the Thermaltake Tower 300. Just print it in one piece if you have the build volume, or split it and use the radiator/fan as support.
The model from “mslo321” was modified by me. The original comes from “Man-in-Black” This bracket allows you to mount the Dell Wyse 3040 thin client horizontally or vertically on the wall, on surfaces or directly on the gantry. - you need…
12-48V 4wire PWM Fan Temperature Speed Controller Board Case. 1X4L FAN-1248 CONF V2-E Uses four M3x16 Socket Head Screws and four M3 nuts. Activation levers for “-, +, OK” buttons. Check for fit of case front connector holes as PCB…
I think this duct design is at it's core one of the better options you can find for this printer. It does have overhangs though that would be prone to sagging. I made a version with basically identical dimensions, but with chamfers that…
Revised Left side model 20260215 - Inner screw holes did not line up as intended. There is also a remix that fixes this problem in a slightly different way. See Link Below:…
Customization This model can be customized in the OpenSCAD customizer tab. Open the CAD file in OpenSCAD and unhide the customizer window. It can easily be modified to fit various sized shafts and to have different dimensions. You can…
I believe the Atomic shroud by Filip to have the best cooling of all the shrouds I've tested. Most other shrouds have poor output or the air stream is directed behind the nozzle instead of at the tip. This one is perfect except it didn't…
Say hello to Sylvester and Tweety caught in one of their classic cat-and-bird moments! This fun and playful figurine captures Sylvester proudly holding up Tweety, probably still plotting how to finally catch that clever little bird…
There was an incident and three of the fan blades off of the original cooling fan were broken off. I didn't have an OEM replacement fan, and while I could order one and get it in a couple of days, I was also not a fan (pardon the pun) of…
Designed in February 2025 to adapt GoPro-style phone mount to Fanatec Clubsport Wheelbase V2.5 for use as a dash and lap timer. Designed to be printed with no supports, prototype was made with 100% infill out of PETG. Overhangs in bolt…
Needed a way to mount the 60mm electronics cooling fan on the switchwire or add a second one Middle skirt modeled to eliminate mounting points for the Mini12864 Bodies on holes can be used to add infill pattern or multicolor to the skirts…
3D design for a 2U, 19-inch rack mount adapter designed to hold an 80x80x25 mm fan. keeping rack equipment cool and improving airflow. The mount is straightforward to install with standard rack screws, offering a fit in standard 19-inch…
Helps to dry your bottle and water bladder faster. My water bladder is dry after 2 hours and the bottle is dry after a little more than 1 hour. You only need a 40mm noctua fan, no tools and no screws.
This adapts a 80mm fan into the 40mm hole which has the nozzle exhaust chamber. I haven't got it working as the fan it's replacing is 24v and I don't know how to get 12v power to the fan. Check my other model which is the nozzle exhaust:…
This is the WD My Cloud EX2 Ultra fan cover replacement modified for 92mm fan. 70mm version and additional details are avaible here: https://www.thingiverse.com/thing:5177184…
Fan mount fits 483mm x 186mm Thehtford caravan/rv fridge vent. To connect several fans I used my fan joiner (https://www.printables.com/model/1217820-fan-joiner-arctic-for-arctic-p9-pwm-pst). I used M4 heat set inserts and M4x12mm bolts.…
Tested on my DDR5 setup with 4 RAM Sticks and the RAM temperature was reduced by 6-8 degrees C. Includes two models, one is combined, and the other offers capability to separately print the cover (in case you want to print the cover with…
This is a Qidi Plus4 rear vent cover which accepts bigger fans (80mm/92mm) and allows attachment of big poop/purge bin - https://www.printables.com/model/1055602-qidi-plus-4-purge-trash-bin
Eco Turbo Fan - FLSUN V400 I designed a kit to mount the BIQU eco turbo fan kit on the FLSUN V400. I started from the fun duct by Robert_Klotz (https://www.printables.com/model/725525-flsun-v400-cpap-duct) modifying it and improving some…
Extended the mount by 5mm. This way, the fan is further away from the back panel, the flow is then less restricted.
![[Remix] Kingroon KP3s Pro V2 - Fan duct (redesign (STEP) and reduced (2x STL))](https://media.printables.com/media/prints/20b7aafb-fcc9-420b-af49-b4f14f45c301/images/10859124_8d45adaa-c782-4689-8a4b-a2aa0410be4b_e61b82b1-7094-44b6-8ae3-0af886071564/2025-10-09-23_49_25.jpg)
