MK4S X MK3S+ Fan Shroud
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Now us ol' fashioned MK3S+ users can experience amazing MK4S 360º part cooling!
- Ocena
- 4,667 / 5
- Polubienia
- 71
- Pobrania
- 633
- Wydruki
- 5
- Wyświetlenia
- 4113
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
***This project is still a WIP, but I have been able to successfully print multiple working versions of this model (and am currently using it on an MK3S+ to print more).***
Purpose: Create the simplest, one-piece replacement version of the current fan shroud for the MK3S+ using new developments in 360º cooling released on the MK4S model.
My current configuration:
--Prusament ASA
--0.6mm Nozzle
--0.30mm layer height (can go down to .15 or .20). Pictures show the .20mm version by itself, and the .30mm version mounted on extruder assembly.
--Organic supports painted on around the round air vent portion of the model.
(Other designers have been adapting the full fan case for the MK3S+, see:
https://www.printables.com/model/977380-prusa-mk4s-fan-mod-for-mk3s-original-toolhead
for an example.)
8/29/24 - V3 includes thicker wall (.90mm) on angled slope of lefts side. Some areas are still a bit messy when printed, but still fit generally well on the extruder assembly.