120mm Honeycomb Fan Duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This two-piece fan duct can be used to limit/direct the direction from which air is sucked into the fans or blown out.
- Ocena
- 5 / 5
- Polubienia
- 243
- Pobrania
- 919
- Wydruki
- 3
- Wyświetlenia
- 4983
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Standard Digital File License
This 2 piece fan duct can be used to limit/direct the direction from which air is sucked into the fans or blown out. Once the fan plate and fan duct are printed, they can be glued togehter. I used super glue, which works fine.
You could try printing the fan duct without support, but that will most likely result in ugly fillets. Therefore, I would suggest using 'supports from build plate only' function within your slicer.
Support
If you'd like to support me for the 3D models I distribute for free, you can use my AliExpress affiliate link: https://s.click.aliexpress.com/e/_oFT8Gq6
Whenever you buy something through this link, I get a small kickback without costs for you ;)
Thanks for your support!