1 / 4
2" Desk Grommet with 4 Keystone Ports – Flush Mount I/O Panel — zdjęcie 1
1 / 4

2" Desk Grommet with 4 Keystone Ports – Flush Mount I/O Panel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Flush-mount 2" desk grommet with 4 keystone ports, optimized for clean printing and fixed installation.

Ocena
0 / 5
Polubienia
1
Pobrania
12
Wydruki
0
Wyświetlenia
118
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution

This is a flush-mount 2" desk grommet with an integrated 4-port keystone panel designed for clean, permanent desktop I/O access.

It installs into a standard 2" hole and is ideal for desks made from solid-core doors or similarly thick surfaces. The design allows internal system ports (USB extensions, HDMI, etc.) to be exposed neatly through the desktop surface.

The keystone housing mounts to the top flange using:

  • 4× M3 heat-set inserts

  • 4× M3x8mm screws

The heat-set inserts are installed in the keystone housing, and screws are driven from the desk-facing side of the flange. This creates a rigid, mechanically secure assembly.

Because of this construction method, keystones cannot be swapped without removing the unit from the desk. This design prioritizes structural strength and print reliability over quick-change modularity. For fixed configurations (such as 4× USB 3.0 or a dedicated service panel), this is typically not a limitation.

The front face includes a large flat area suitable for debossed labeling. Text can be added directly in most slicers and paint-filled for high contrast if desired.

The geometry has been optimized for easier FDM printing with reduced support requirements and strong layer orientation.


Features

  • Fits a standard 2" hole (use a 2" hole saw)

  • Supports 4 standard keystone modules

  • Optimized geometry for easier FDM printing

  • Heat-set insert + screw mounting from desk-side flange

  • Clean flush-mount appearance

  • Large flat face for debossed labeling


Installation

Requires a 2" hole saw.

  1. Drill a clean 2" hole through the surface.

  2. Install keystone modules.

  3. Connect internal extension cables as needed.

  4. Secure using screws through the flange (heat-set inserts required).

  5. For Hollow-Core Door Desktops, use the gap support segments.

  6. Thread wiring through the hole and Insert the grommet assembly.

  7. Secure in place with the Compression Ring.

Glue is optional depending on your desk material and desired permanence.


Example Use Cases

  • Desktop USB extension access

  • Headless system service port (USB + HDMI)

  • Workbench I/O panel

  • Clean cable management solution

Tagi