Liczymy pasujące modele…
Also check the model out on MakerWorld for BambuLabs printers print-profiles! Update 6th May 2023: Thanks for the great feedback everyone that downloaded and made this model! I finally had time to make a new version. I've added a few…
Für SD-Karte, Stifte, Taschenrechner, usw.
Vertical desk holder designed for Sakura Micron pens. Holds 24 across two tiers. Also Rotring Tikky, though they stick out a little higher. Holes are 11mm wide so anything else with a barrel that size ought to work. Print Settings Printer…
Hang your IKEA Mittzon under-desk felt "basket" 10 cm lower. I needed more space for all the cables, KVM switch, power adapters, etc. The "hook" part takes a bit of fiddling to push through and it holds very strong. I recommend using M4…
For the leg mounted stabilizer bowl, use any one inch nylon velcro strap. Here is a link to one below: https://www.amazon.com/dp/B0B567TCHF If you would like me to print one for you, check out these links:…
Style meets functionality with Hexo Pod desk organizers. Intended to keep your desk space clutter-free and organized to decrease annoyances and increase productivity! All of the parts fit together so that you can customize the size and…
Desk rail pen holder for Fredde desk. Needs 6mm hook and loop strap to hold in place. Smaller holes will fit Lamy Safari pens, large fit Lamy Al-star. Print low density with two perimeter layers, or whatever your machine likes best, most…
Ideal for more permanant installations to reduce cable clutter. Designed with short right angle male to female connectors in mind. The version with_slot adds an additonal cable slot to route cables, e.g. keyboard/mouse usb under the unit.…
Size base 140x109x19mm. Size holders 52x52(or 104)x107(or 77 or 47)mm. Filament need cca 70-90m. Next model:
Easy to print brackets to mount the Bambu Lab A1 mini build plates under the desk. Each brackets feature two screw holes for 3mm screws. There are two versions available. One holding tree steel sheets and the other holding five steel…
Size base 195 x 97 x 52mm(height without locks). Size holes for pencils 13.5 x 13.5mm. Use papers 9 x 9cm. Holes for USB, SD cards and micro SD cards too included. Vhen you need use glue for hard plastic (Tamiya, UHU…) for locks.
Here’s my standalone Moon Hexagon display piece. Print it standing on its legs. I used supports, but you can try without them if you’re feeling brave 😉 The insert tolerance is set to 0.2 mm, which works very well on my Prusa. With a 0.6…
Desktop turtle sandbox. There are others and perhaps better ones, but I wanted to try my hand to fulfill request from my daughter. Some gluing required for the flange pieces that keep the lid in place. (sorry, tool not included) I have…
Under desk mount for the Anker 564 USB-C Docking Station.
Holds a MacBook Pro 2021 14" on the leg of a Flamaker Electric Standing Desk. Model is designed to take 4 M6x20mm Bolts, with spring washers. I used Diall branded ones from B&Q. In order to make sure that the leg was gripped tightly, I…
Desk organizer with a particular and modern design. Each compartment is designed to adapt to accommodate anything!
This print is not a magic device. You need a lot of practice and patience and time to weld the filament together with Sunlu's filament connector (Filament Connector FC01). Any filament should work. I printed with 0.2 mm layer height 0.4…
Comes with two different twist options; form fitted and round. Use a bit of glue on the print surface to ensure good adhesion. Printed with 15% Gyroid.
Slide this cable management bracket onto your desk and tuck all your cables up under the desk, or along the back of the brackets. Desk can't have a lip or non-uniform top surface as the clip slides onto the edge of the top surface of the…
Keep charging cables ready, hanging off the side of your desk. Uses a wedge to lightly clip the desk. Source:…
Hey guys, i design my own PS4 500gb under desk Holder! I post here left side!
Hey guys, i design my own PS4 500gb under desk Holder! I post here left side!
I made a desk pet Print Settings Printer Brand: FlashForge Printer: Adventurer 5M **Rafts:** No Supports: Doesn't Matter **Infill:** 15% Filament: Any Cubic PLA glow-in-the-dark Category: Pets
Easy to assemble with articulated arms and movable legs. Model shown is at .16 Layer Height but should print fine at other settings. A brim may be necessary to keep the arms in place while printing, and adding Variable Layer Height to the…
its a Desk Organizers hexagon its 18cm wide and 15 cm tall, i dont know what to say more i just needed it so here is the model for other people
I was looking for a stand for my Ampero 2 Stomp and couldn't find one anywhere so I made it. I don't think it will print very well on the side, so I suggest printing it as it stands on the desk - that gives a nice, large adhesion area.
This cable manager is specifically designed for organizing and routing essential but infrequently accessed cables, such as HDMI, DisplayPort, USB, and power cords. It's the perfect solution for hiding cables under your desk, helping…
A minimalist tray for Vessel Ball Grip 220USB Electric Screwdrivers. Spaces for extra bits or bit adapters.
Simple steel plate holder under desk or on the side. You will need 8 screws.
A 90 degree hook/guide that can be mounted on double-sided adhesive tape under desk to help manage cables. No supports or gluing required, compatible with cables with an outer diameter of up to 5 mm. + bonus: simple cable hook in this…
These models are drawer organizers for the Sterilite 2073 Small 3 Drawer Unit ( Link ). This is a work in progress . I will be working on various divider orientations as needed for my use.
Under Desk Mounting Brackets For Kensington SD4700P Docking Station And Its Power Supply. 2 Of Each Part Needs Printing. Needs 8 4x20mm General Purpose Screws.
I'm not gonna ask for a coffee, but please make sure you give me a like if you find this model useful. My kids need space on their desks and a cool idea was to store their laptops under the table plate. I have found several models on…
Enclosure for a Sonoff NSPanel Pro 120 . Couldnt find one online so i made one in fusion . Used some heat inserts for the plate mounting
I designed a mount, to mount the Crucial X10 Pro ssd under my desk. X9 / X10 (PROs) have the same size - should fit all of these models. The original version is quite snug, so the ssd fits perfectly between the bracket and the table If…
I printed two of the 1:12 size, which makes it just a little too small for Skittles and M&Ms. One in PETG and one in PLA. The PETG supports removed a little less clean, other than that, supports off, then snap the legs down and up and…
These are the 3d models to make an under desk mount for the NCASE M2. All parts besides the “Bump Pad” were printed in ASA, but other materials should also work. The “Bump Pad” was printed in TPU as it is softer. The screws used on the…
The Magsafe Charging Ball is perfect to keep your desk in style and your phone charged ! Made for easy printing with no need of support, it is pretty compact and useful.
I designed this to mount my Mac Mini under my workbench. The Mac sits securely in place but if you lift the front it can slide in and out. All front and back ports and the power button are accessible. I printed mine in black PETG. I was…
The original table feet were too slippery, so I drew overshoes and printed them in TPU.
I added holes for some tungsten weights to keep it from sliding around as much.
The **FixBox** is the ideal desk-sized organizer for electronics enthusiasts and professionals, designed to keep your repair tools neatly arranged and readily accessible. With its spacious compartments and sturdy 3D-printed construction,…
This is a basic wall mount bracket for your desktop toy swords. When you're bored at the computer, you can play with a 10-inch sword of your choice. This wall mount displays those swords between plays! This is an upgrade from and…
Print Details: 3D Printer: Creality K1C Print Material: Hyper PLA Print Settings: Standard 0.4mm nozzle with default settings. Print Support Required: Yes Print Duration: 1h 45m 2s Dimensions: a. Model Dimensions Slot Height: 18.8mm Top…
Print Details: 3D Printer: Creality K1C Print Material: Hyper PLA Print Settings: Standard 0.4mm nozzle with default settings. Print Support Required: Yes (base to model only) Print Duration: 1h 5m Dimensions: a. Model Dimensions Slot…
Just edited the desk part with threads for thicker desks. Dont forget the support arm, it's shorter.
This is just a simple stand that I made to hold the computer along with 3 portable hard drives that I had.
Size 125x160x100(height)mm. J, K are inserts for I (F). For insert (B,C,D) you can use brim. Wall depth 3mm. Filament need cca 90-110m. First complete parts B(C,D) and E(,F,G,H,I). Seconds models:
The original design had a stacking lip on the bin which is not needed, and I had finger holes to get the staples and staple puller out, but it is easier to just dump it out.
El Organizador de Escritorio Automático es un accesorio funcional y elegante fabricado en madera de alta calidad, diseñado para mantener el espacio de trabajo ordenado y eficiente. Este organizador cuenta con un mecanismo giratorio…
This 3D-printed speaker stand is designed to fit 14x14 cm speakers and features a 1 cm stopper to keep them from sliding around. It’s compact, looks great on any desk, and gets the job done. The design is 14x15 cm but can be easily scaled…
This model has 3 parts. The main desk organzer, a paperclip/small items drawer, and a cover for the tape dispenser
I designed this headset holder for my JBL Tour One. But i holds my Sennheiser headphones as well. ;) The maximum width is 29mm. It clamps well on a 19mm desk plate. But for a little extra security i added double sided tape on the front…
A simple screw-on under desk holder for the Magic Keyboard and Magic Trackpad by Apple. As all available solutions did not met my expectations and my space, I specially made one for narrow space under the desk with a turned holder for the…
Keep your audio interface secure and organized with this sleek 3D-printed stand! Perfect for desks and studio setups, this stand is designed with functionality and style in mind. Features: Dimensions : 7.5cm x 8cm wide, with a 12° tilt…
Created these simple storage boxes to quickly organize my messy desk drawer. Given that this wasn't mean to be a display piece, the focus was to create something that prints quickly and doesn't use a lot of filament. The optional…
A storage unit to put things in that also has a hook on the side to hang things.
To successfully craft this item, get the spring from the pen, on both sides, install the screw from the bottom, print 5 parts for the left side 2x stick 2Xroast 1xleft side/+2 cut springs, glue the springs to the underside of the roast.…
Size 108x135x105(hight)mm. For insert you can use brim. Tested PLA 0,2mm random seam. Next model:
This is an adapter for a Desktop Vacuum to clean your Printer's aluminum cross bars (or X bars). It has a guide to keep the vacuum aligned with the bars so you don't have to focus on keeping it straight! Works well in most places for my…
I have improved the model by adding stronger hooks that do not need supports. I have also added some stops that prevent the Mac from rising when the power button is pressed. *To insert the Mac mini into the stand it must be done…
I have an enclosure for my 3D printer Elegoo Neptune 4, so my screen is inside all the time, and it is a bit difficult to use. I designed a screen holder for the included touchscreen for the Elegoo Neptune 4, also it can hold a basic…
These Superlight Baseplates , whilst printing fast and clean, lack weight and slide around easily outside of drawers such as on desks and shelves. I've taken the aesthetic of the base from the Mini HSW x Gridfinity Organiser and made…
This can be printed in two colors, but of course it doesn't have to be. To do this, the files Stand.stl and Strip.stl must be imported into the slicer as an object. Those who have a MultiColor printer will know how. For those who want to…
Unleash your creativity with the Mini ITX Open Frame Desktop PC Case! This compact PC case is designed for enthusiasts who love individuality and seek the perfect blend of functionality and design. Why Choose Our Case? ✅ Printable on Your…
# UGREEN CD328 Nexode PD Charger Under-Desk Mount ## Overview This is a 3D printable mount designed to attach your UGREEN CD328 Nexode PD Charger under a desk or table. The mount helps keep your workspace clean and organized by moving the…
Need more space for equipments or some part of printed project? I didn't have enough space on my desk, so i made this model that can organise your desk too (If you gonna print on high speed use 2 tree supports on each sides of hexagon to…
Headphone hanger made to be mounted under your desk! The screw holes are 4.5mm (0.177 inch) in diameter. Fits larger headphones as well as smaller ones! Tested to fit: Logitech G Pro X Razer Blackshark V2 Hyperspeed Bose 700 NC Sony…
🧩 Model Title Modern Desk Tray --- 📌 Description The tray's clean lines and subtle curves provide a perfect resting place for your wallet, keys, and other essentials. Its compact size ensures it fits effortlessly on your desk, nightstand,…
-+- Keeps stuff from falling -+- Great for items stored close to the edge of a table or desk, like plants. -+- Required Parts -+- Prints: 1 x Extension 2 x Clamps Hardware: 2 x M4 Bolts 2 x M4 Washers 6 x M4 Nuts -+- How to use -+- After…
I used the Cali Cat as inspiration for my desk-top organizer. Printed as a gift for my daughters teacher. I printed this at a high detail setting even though it probably didn't need it. I used supports from build plate only.
sung, minimalist stand for the Jabra Speak 55 LIKE if you like. thanks!
Easy and fast print to store your headphones on the desk. Hope you like the design and happy printing. Materials 1 x middle part 1x top part 1x bottom part 4 x screws Print instructions Print the middle part on the front and the rest on…
Keep your cables organized with this modular low profile cable tray. Perfect for computers and power strips, this tray will be able to hold the charger bricks and cables to keep them organized and out of sight. I recommend printing parts…
Headset Holder Fits common Headsets und Headphones Mount it with 2 x 4mm screws or with a double-sided tape Keeps your Desk Clutter Free All photos uploaded are of the actual printed model , and are copyright protected If you like this…
Simple xbox controller stand/support that is modified to be screwed into the desk's side. I printed it on a ender 3 v3 with 0.20mm layer height and other default settings, nothing special. Note that this is a remixed version of Fx137's…
Since these Minirig 3s are basically useless as portable speakers (connection issues, accidental resetting, button issues, proprietary charger, terrible app etc…) I figured I would make them perminant additions to my computer and thus…
Needed a cable organizer for my desktop, so made this one. Slots are big enough for bigger screen cables and centre the end with a hopper design.
Made so it fits a Logitech G502. You can easily grab it from underneath.
Made so it fits a Logitech G915. Should work fine for other slim keyboards. Length doesn't really matter because you can just adjust the distance between the two supports.
A quick and adjustable laptop holder screwed to side of my desk for my MacBook 13". Printed in 3D FILLIES PETG on my K1C. Allows access to the USB - C connectors on the laptop (as long as you're OK with the apple being upside down ;))…
HP Elite/Prodesk mini (G3/4/5, possibly later) 10" 1U rack mount with 2 keystone slots. 250mm wide faceplate.
My desk has a hole with a diameter of 77mm, which I don't need. This plug closes the hole. Printed in PETG. No support and no brim needed.
Headphone desk support, thought out as modular - I also want to print some other models to attach to the desk, things like a sorting tray for small parts or a soldering iron holder. While the support itself easily slides in, after you…
This is what I made using fusion 360 my first time. Let me know how it works and if you like it.
Added larger base and upright supports as well as a new hook for the Nest Mini desk stand. No supports needed. Print as pictured. Edit: Added "Front" version with improved stability.
Just got my Yaesu and realized I needed a stand to tilt the radio up, and provide a place for the microphone to attach. I came up with this simple model. This holds the entire radio and not just the face which is what I wanted. I printed…
Designed a stylish, detachable pen holder in C4D for desktop organization. Available in 3 sizes : 21cm (Large): Challenging print (test your printer’s stability for this big size) 😊 15cm (Standard): Perfect for daily desk storage. 10cm…
E N G L I S H A stand for this submarine: https://www.thingiverse.com/thing:4173890 I printed this submarine for my brother for Christmas to motivate him to finish the submarine simulation he's been working on for years. I created the…
I needed a desk organiser to tidy up my lithium battery chargers and cables. Quick and easy to make with the Maker World MakerLab tool.
Googly eyes not included. This is a redesign of my previous fume extractor, made to be a bit sleeker on the outside and to have the exhaust come out of the side instead of the front for easier use. I also added a foot for stability, and…
Let me know if you have questions. print is straightforward: no brim, no supports, .02mm layers, PLA/PETG/TPU (high durometer only) should all be OK. If your building a desk with these plans and want to fit my rolling conduit filament…
