1 / 2
Stopping plates for T12 soldering station under desk hanger — zdjęcie 1
1 / 2

Stopping plates for T12 soldering station under desk hanger

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A plate to make all T12 soldering station's compatible with maco2229's under desk mount.

Ocena
5 / 5
Polubienia
18
Pobrania
67
Wydruki
2
Wyświetlenia
845
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

Stopping plates for T12 soldering station under desk hanger

I found these pretty under desk hangers from maco2229 which I wanted to use. But my KSGER T12 soldering station's and SMD rework station's face plates are flush with the rest of the case which makes it impossible to fit into these mounts.

Therefore I designed a small plate that can be sandwiched between the original face plate and the case of a T12 soldering station, like KSGER, Quicko and such which have face plates that have no overlapping edges like mine.

 

Assembly

To mount the plate you have to unscrew the face plate and unplug the power from the controller board, then you can put the plate around the face plate and replug the power connector. 

Afterwards you can just screw it back on, it just takes 3 minutes to do, easy!

 

Notes

They are great soldering and rework stations, but always make sure the case is properly grounded. Newer revisions should be grounded but always check to make sure they are!

Tagi