P
PrintablesJohn SC
Rewinder disks remixed
No change to the original model instructions.
- Pobrania
- 344
- Polubienia
- 47
- Ocena
- 5
Wyniki wyszukiwania: remixed
Liczymy pasujące modele…
P
Printables
REMIXED Creality K1 LIBRA Extruder - Trimmed gearbox guard
This remix allows you to fit the LIBRA extruder without trimming 2mm off the K1 toolhead carriage, however instead you will need to trim 1mm off the side of the orbiter gearbox housing. Caution. This may allow oil or dirt from the gearbox…
P
Printables
REMIXED - Latch with Locking Mechanism
I love the model Adamix created! As soon as I saw it, I knew exactly what I was going to use it for: My cat's litterbox enclosure. So this was one of the first practical prints I ever printed on my 3D printer. But I was having issues with…
P
Printables
Ball Bearing Axle for PolyDryer Remixed
When I tried to use the supplied axle with my PolyDryer on a roll of Sunlu ABS with a broken ring, I found the spool wasn't lifted enough to avoid the bottom rollers. About that time I saw the One-Way Check Valve video from @clough42 and…
P
Printables
Simplified Filament Dry Box with Rollers (Remixed)
Credit on Printables to: @ IDVx Consulting @ GunplaMark I have remixed and simplified the prior designs above: Revised the filament exit Revised the base and rollers to be one piece with integral desiccant bin. Left off the hydrometer and…
P
Printables
Druckblechhalter remixed with mounting holes
I added four mounting holes to attach it to a board.
P
Printables
Modular Drawer Dividers (Remixed)
I have remixed the given 3D-models for separator wall size 4mm because the wall size of the original dividers (7mm) was much too thick for my use case. By reducing the wall thickness, a lot of time and material can be saved. The length of…
P
Printables
Wahl Clipper Guard Remixed (Easier FDM Printing)
This model was originally uploaded as an STL provided by @Hi_Im_Dave . It was a near perfect fit. I took it into fusion to add add a custom designed brim/mouse ear and then i noticed that the model itself had a lot of issues. In fusion I…
P
Printables
Prusa Mk3 and Mk4 Light bar (Remixed)
Printed in Voxel PLA Orange (Close to Prusament Orange, but slightly lighter) .020 layer height 2 perimeters .015 Infill - whatever infill pattern you like Supports for mounting holes
P
Printables
Remixed Obsession VP and Theme card tray for JS500's Organizer
In the description for the original organzier, JS500 said “it would be fairly easy to modify the card VP/theme card tray to accommodate the smaller theme cards”. I agreed, so I did. The grid bottom was achieved using a height-range…
P
Printables
Stagetop Catan Tiles Remixed With Component Holder
You can the corner tile in the slicer in half to be able to use it for other games. I used height range modifier (5.8-6.2) and made the blue surface with Hilbert pattern to enhance the “sea” look. Color change 5.8 (layer 29) for blue.…
P
Printables
DJI Avata Battery Charging Dock Remixed
No supports required. No assembly. Just Print slide in the charger and the use. Hope you like my remix.
P
Printables
Drag Chain End 10x11 remixed
Original model was close to fit my cable chain but needed a few tweaks.
P
Printables
MX5 with Stand Remixed
Scaled down, mirrored and added background. Print with 0.2mm layer height and top surface ironing for best results. Use multicolor printing to add contrast between background and MX5. Cheers!
P
Printables
Amulet of Mara remixed
Updated version of the amulet of Mara. I don't claim the design, that requires artistic skill. ;) What I've done is update the model to include the gemstone as one piece for MMU or XL multi material printing. I've also beefed up the…
P
Printables
Owlet Sock Base Station Wall Mount - Remixed
A part to mount the owlet dream sock onto the wall. This is a remix of Cluadius's outlet mount version.
P
Printables
Punisher Hitch Cover remixed
the Original model's clips where too short to latch on the holes of my hitch so i mixed the original model and Simple Hitch Cover to come up with this remixed model. *cover pic is from Original Model. I forgot to snap a quick pic of what…
P
Printables
Remixed for Combined Double Battery
Remixed for Combined Double Battery. Removed divider for batteries. Came out a bit loose but tightens up nicely when the case is closed.
P
Printables
Remixed base for AIRVOOC charger stand
Quick remix of the base for this wireless charger stand.
P
Printables
Remixed Simplehuman Shower Caddy Shower Head
I really liked the original SimpleHuman Shower Caddy Shower Head holder, but it broke the first time I tried to attach it. I modified the original design to attach using 4 zip ties instead of the friction/snap fit. While I had the…
P
Printables
Poop guide FlashForge AD5X remixed
I used the original part for 2 months, but now I need more space behind my printer. So I created these two versions based on the original design. Changes: - Thinner walls (1 mm and 1.5 mm versions instead of 2) - Simplified geometry -…
P
Printables
Qidi Q1 Pro LED light halo - Another remixed for lid riser
This is a custom LED strip mount designed for the Qidi Q1 Pro. It’s a remix in spirit only — I mainly used the original idea but created my own model from scratch. The design consists of three parts that attach to the top frame of the…
P
Printables
Remixed Tool Organizer
The original model had hole for alignment pins. I added pins using TinkerCad. This just the revised part. you need to download the original object to get the base. Print upside down with pins pointing up.
P
Printables
Remixed ArduCam Stand with Anet A8 bed mount (GoPro style)
Edit 1 : I have added a new support (v2), fixed between bed and spring for more stability. Original : This is a remix from ArduCam Stand : https://www.thingiverse.com/thing:1579435 I have replaced existing foot with an Anet A8 bed mount.…
P
Printables
CNC Pen lift - remixed for v-slot 20 mm gantry plate and metal pen clip
Remix of the classic pen lift to fit on a 20 mm v-slot gantry plate. Apart from this the tool holder has been made to accomodate a metal pen holder ( source - 30 mm hole spacing), which is also adjustable in angle (the top hole is tapered…
P
Printables
Twist Lock Present (remixed)
This is a larger box than the remixed original. Inside size is 190x140mm.
P
Printables
Shoehorn remixed a little longer 16.5cm.
I printed with one edge on the plate and a brim around it. layers parallel to that edge and not straight down the shoehorn. I thought it might be a problem and was considering printing on a raft, but I no longer think that is necessary.
P
Printables
CAULK TUBE CAP REMIXED
Added few milimeters for better clearance so it wont rub against the caulk gun. Added a slot for a thin tag wire for not losing the cap. Added V2, threads all the way for better grip. I would love to hear what you think and if there is…
P
Printables
Plastic bottle cutter into strips (Remixed by @Paulovic)
To switch between the 7 mm or 11 mm widths, simply rotate the blade holder. My print settings: Printer: Neptune 4 Pro Layer height: 0.16 mm Nozzle: 0.4 mm Infill: 15% Speed: 150 mm/s Supports: Only in the larger hole Filament: I used PLA…
P
Printables
Remixed - Keychron Q6 Max Feet
Remixed from @derekyle_481832. These are feet that attach to the bottom of the keychron Q6 max (and maybe other models) to give it a bit of lift. I really liked the original but it was too steep for MOA keycaps. Requires 4 M3x25mm socket…
P
Printables
Useless box "Hank" Style - Remixed
Useless box "Hank" Style - Remixed Credit where it's due. This is a primarily a remix of... Useless box "Hank" Style https://www.thingiverse.com/thing:4524815 by Blayder, originally posted on July 5, 2020. - - - - - - - - - - - - - - - -…
P
Printables
Remixed LDO COB Light Strip Mount for 1515 Extrusion (8mm, 10mm, 12mm wide)
I liked the LED mounts from LDO's 2.4 kit, and bought some 12mm 24V RGBW lights to put on all my printers for some status indication while also maintaining decent looking lighting. The original BOM is changed slightly, now needing 2x M3x6…
P
Printables
Kitchen Towel Hooks - remixed, parametrized
Remix of original model to allow more / less hooks, diferrent spacing, etc.
P
Printables
Remixed Here to Slay insert
This remix accounts for thicker sleeving (All expansions and 100 micron sleeves that did not fit in the original model). Also includes 2 trays to hold the cardboard tokens if you put them in coin capsules. These also will work as a spacer…
P
Printables
Flashforge AD5M Enclosure Hinge & Handle FOR MINIMAL ENCLOSURE - remixed to be easier to open and use (print-in-place Door Hinge) v3
This v3 of the AD5M door hinge for DIY enclosure is expressly for the Minimal enclosure and its remixes. It repositions the plexiglass door downward by 5mm to accommodate getting the touchscreen back on the metal frame, as well as keeping…
P
Printables
Spoolholder Quickchange Remixed
Print settings used on my ASX1 Printed from PLA Layerheight 0.28 mm Infill 20% No adhesion, no support 0 Bottom Layers 80 mm/s Infill 50 mm/s Wall 1/2 roller took approx. 30 min.
P
Printables
Tacoma Side Decal Remixed
Enable ironing on top most surface to get the best results. I flattened the top surface for a smoother top finish and split the object into two pieces (for smaller print beds) that should be easy to glue back together. PETG recommended…
P
Printables
Remixed 5015 Blower Duct for Original Cover of Ender 3 V3 SE
You will need to use other, slightly longer screws.
P
Printables
12 key midi keyboard (remixed)
12 keys. improved key support. combined key hinge rest with the enclosure. fits on a 330mm print bed. refer to original design for build instructions. LOW PROFILE POTS AND ENCODER NEEDED
P
Printables
Remixed Bouncy Heart Fidget Toy - with longer "spring"
This is a remix of the Bouncy Heart Fidget Toy by z plus printing
P
Printables
Remixed Battery Mount for Oculus Quest 2 with GOMRVR Halo Strap for 10000 mAh Powerbank
Remixed for supporting common 10000mAh powerbanks. Possible to use other powerbanks with a bit different dimensions. Recommended to glue parts together.
P
Printables
Wingspan Nesting Box Remixed Player Trays
Remix of js500 wingspan nesting box insert player trays to have a dedicated spot for Hummingbird tokens
P
Printables
Sony F100 Battery Shell + Remixed Adapter
~~~!!!WARNING - LITHIUM BATTERIES. If you don't know what you're doing with these type of cells please do not attempt this until you've properly learned. Do your research, you can cause fire or explosion if you are not careful. Take your…
P
Printables
modular snakz (REMIXED)
THIS IS A REMIX FROM muzz64's snakz. NOT my design! I made it so you can download the files and use them to make a custom length snake or make . I used tinkercad to make it so you could use it to make one. the length of the modular snakz…
P
Printables
You Can Go Fast Emblems Remixed
Remixed You Can Go Fast, I Can Go Anywhere emblem to make the lettering cut through and to add a secondary shape. Rectangular and Octagonal. You will have to find a font with some good bridging for certain letters, like A's, O's, and R's.…
P
Printables
Remixed Akro-Mils Large Drawer Trays
This is a remix of the "resistor" variant of the Akro Mils large drawer trays. The original model offers 16 dividers, but I wanted 8 for my application. So I removed alternating walls to yield 8 dividers per tray. I was able to use…
P
Printables
Remixed Chiron Dual 5015 fan Volcano MGN12H
Wanna's Chiron Dual 5015 fan Volcano remixed for use with MGN12H linear rails. It was made to pair with the FYSETC 3D Printer All Metal E3 V6 Volcan Dragonfy adapter that was originally meant to mount the Chiron hotend to the standard…
P
Printables
Remixed Lock-in-place in-spool lid for hygrometer tabs
This remix alters the hygrometer lid to have relief slots in the mounting hole. Maybe it's a regional thing, but the round hygrometers I buy in the US have tabs that stick out which make them difficult to insert into a hole without relief…
P
Printables
Remixed bottom case part for CC1101 Flipper adapter
This case has an opening in the back to allow space for the pins for when using it without the flipper.
P
Printables
More screw holes - Remixed C1 and D1 guard plates
The original rear guard plates for Design8Studio's excellent minimal enclosure lack any screws in the middle, where the two plates connect. The locking grooves are not enough to keep them attached to the printer body. They must therefore…
P
Printables
Core One Top FIlament Guide -- REMIXED using 2-deep 6mm by 2mm magnets (28 total)
Just like the magnetic parts on the original, but using round magnets instead of the original bar magnets. The cover isn't changed so it isn't part of the remix. Still need that part from the original. From the remix description: Changed…
P
Printables
Remix for Bore Snakes - Multi Purpose Pull Cord Style Handle(Remixed to be a bit stronger)
The original design is excellent, but I added a larger slot and a full through-hole so that you can wrap a bore snake cord around it for more leverage.
P
Printables
ABB Tango Zigbee Switch Tuya - tříbodová aretace tlačítka - REMIXED
Zadní tisk s podpěrou, pod PETG bych nešel.
P
Printables
Taurus TX22 Remixed to be smooth
Who doesnt love the Taurus TX22?!! I Printed my remix this night and it looks wonderfull and smooth!! Thanks again to @Racoon Dev for sharing the .Step file <3!!
P
Printables
Slim and simplified Nozzle brush for Prusa XL - Remixed for A1 Mini silicone brush
If you are like me and bought Silicone Wipers for the A1 Mini, @Dutch, @Herc or @Plastic's solutions won't work for you as the former appears to acquire some little mounting plate thing (?) while the other two support only the A1 Silicone…
P
Printables
Japanese puzzle box (Remixed)
This design was created by @ravi72munde. For instructions look here: I printed it at 100%, and it worked quite well. Some light sanding was required to ensure a proper fit of the "lock base" and the "lock base lid" inside the box. In my…
P
Printables
Gridfinity - Remixed Digital Vernier Caliper Holder 6x1x7U
I liked Jonathan's design, and it fits my Mitutoyo calliper well, though upside down. This turns it over (right way up) with a slightly higher box at 7U and provides for a wider range of callipers. (My digital ones didn't fit the long…
P
Printables
Gridfinity Vesken baseplate (remixed for prusa Mini)
Gridfinity base, for any gridfinity compatible model. Remixed for prusa mini. BGcode ready to print for prusa mini + prusament. Download and print one of each model. You will also need one extra end part, that you can download from the…
P
Printables
Remixed for rimmed tank adapter
remixed to remove the embossed logo to fit in my adapter for a marineland rimmed 75g
P
Printables
Tetris storage box remixed
Created an updated version of this Tetris balance game storage box. I removed the pegs that are for the hollow version to support the solid version of the play area. Printed in Bambu PLA Basic white 0.2 layer height, 10% infill, gyroid…
P
Printables
Sortfinity (Gridfinity) Small Part Sort and Storage - Remixed
All credit to the original designer, this is a remix to fix the original STL files that had errors to improve slicing and printing.
P
Printables
Remixed Adaptation of MMU3 Cassette Compatible Buffer for Prusa CORE One/+
Remix of a remix to add a solid-walled variant, for easier printing (at the cost of extra filament). This also gives pariety with the original MMU3 Cassette Compatible Buffer, which provides solid-walled variants for the top and bottom…
P
Printables
Window Vent remixed
79mm tall by 31.5mm deep window insert with 180mm by 20mm vent opening. Includes 63mm round to 180x20 duct transition and vent cover when not in use. Printed with PLA, block side down with build plate supports. My window channel is 880…
P
Printables
remixed wing mount for V1/ V2 dummy 13 model by mothmansculthead
remixed wing mount for V1/ V2 dummy 13 model. i made it look more close to original model of V1 from game ULTRAKILL created by Arsi "Hakita" Patala. Parts were changed to look closer to original model from ULTRAKILL and to be durable.
P
Printables
Prusa Mini - Almost Centered Extruder remixed
This is a fix for uneven extrusion on the Prusa Minis X-axis, originally researched by Lajbror . My mount is based on the Remix made by Russell B , made originally because I had warping issues with his design. The final version by me…
P
Printables
Remixed Pioneer Woman Knife Block
Remix of 13 Blade and Honing rod Pioneer Woman Knife Block. Done in Blue Silk PLA 1.75. Able to be hand washed in Warm water where your original block is made of untreated wood and will end up molding or retaining water and expanding.…
P
Printables
Heroes of Land, Air and Sea Remixed to add miniatures storage
The chain of remixed inserts from the original HLAS insert designed by Dignam continues! After deciding to with the insert nicely remixed to save filament by Kniephaus I decided I wanted a few improvements, and well.. ended up replacing…
P
Printables
Remixed Imperial Socket Holders 3/8" Drive - Gridfinity (1 row)
The original model fits my newer Craftsman 3/8" drive sockets perfectly! But I'm used to socket organizer layouts where the sizes increase from right to left. To satiate my OCD, I flipped the model and redid the label to reverse the…
P
Printables
Remixed Core One heatbed cable cover
A different approach to the printhead cover collisions and solves an issue I was having. Twice, my print sheets have slid under the cable cover and have made contact with the 24v headbed supply bolts, causing the printer to reboot. This…
P
Printables
Airsoft Speed Loader - Remixed parts
Some improvements to the model. Still haven't been able to get it functional and ran out of time to work on it. Maybe someone can pick up my pieces.
P
Printables
Monitor Riser remixed for M4 screws
I really liked the monitor riser from @The_Wooter but not all big box store 1x10s are the same size, so ne wound up a very tiny bit wobbly. Plus the cleaning crew at work kept knocking them a bit out of alignment. So I added chamfered…
P
Printables
Creality Space Pi Filament Dryer Spool Adapter for Smaller Spools (250g/500g) Remixed V1
The difference from the original is in the bearing, which has a 5mm hole instead of an 8mm one, and the add an insert and M3 screws to reinforce it or m4 with nut a hole larger than 5 mm, you can add an adapter for a larger diameter 6mm…
P
Printables
Onn 4K remote holder - remixed
This is my remix of idesignstuff's ONN 4K Remote Holder . I slimmed it down a little and added two tangs to the underside which mount it in the pen slot in the F150's console. It can slide forward, backwards, or anywhere in between. It is…
P
Printables
Remixed bucket for pond water outlet
I closed the hole in the bottom and added a thread to attach the hose. I used this: https://www.printables.com/model/214369-14-npt-male-12-hose-barb-fitting to attach a standard 1/2" / 13mm garden hose.
P
Printables
Birdhouse -- Remixed to house Google Mini Speaker
I remixed this from the American Craftsman Bungalow Birdhouse by using its facade and base, then reworking the interior to fit a Google Home Mini. I also repurposed the Google Mini ring from the Retro Alarm Clock Stand for the Google Home…
P
Printables
Creality Space Pi Filament Dryer Spool Adapter for Smaller Spools (250g/500g) Remixed V2
V1: The difference from the original is in the bearing, which has a 5mm hole instead of an 8mm one, and the add an insert and M3 screws to reinforce it or m4 with nut a hole larger than 5 mm, you can add an adapter for a larger diameter…
P
Printables
Remixed iPad Case Kickstand
This is a shortened version of the original model that fits the ZoneFoker (!) brand of iPad case.
P
Printables
Fractal Design R2 & R3 HDD Caddy/Sled - Remixed with 2.5in drive mounting
Fractal Design R2 & R3 HDD Caddy/Sled - Remixed from cfelicio's version to included 2.5in drive mounting holes
P
Printables
Pill box with cutter - remixed for different sized pills
changed the internal box shape so it can accommodate round and small pills in addition to larger oblong sizes
P
Printables
Left hand Grip for Mamiya RB67 remixed from https://www.thingiverse.com/thing:2439779
Remix of https://www.thingiverse.com/thing:2439779. Left hand Grip for RB 67 Remixed to work with the larger and heaver RB67. Printed in PETG CF with 6 walls and 50% cubic infill
P
Printables
Heart of Te Fiti (Moana) mold - REMIXED Hinged
I found the original mold and thought it was a great idea. I didn't like the blank back, so I mirrored the design side and joined the two with a hinge. I printed this without supports and at 0.1 layer hieght. It worked perfectly right of…
P
Printables
Ballista Turret - Remixed Miniature Terrain
I have several boats and found the armaments on Thingiverse lacking. I cut the ballista base from the Dragon Hunter wagons by ecaroth. I designed the base and post connections in solid works. The boats pictured are the Maiden's Gambit…
P
Printables
CryoPod - Interior Detail and Glass Pane - REMIXED
I tried this a few years ago and just could never get a manifold object to come out. I tried again this week and I guess I've learned something. I wanted to make a hollow or broken cryo chamber that might be discovered post horrible space…
P
Printables
Digivice - REMIXED
This is just a half-sized version of the original with a double thick belt clip. Category: Toys & Games
P
Printables
Cat slow feeder for Petlibro Granary Feeder (remixed)
This modified feeding tray is for this feeder: https://www.amazon.com/PETLIBRO-PLAF005-Automatic-Cat-Feeder/dp/B0953SDCRG/ If it looks like this, you are good to go. I remixed the slow feeder for another model of Petlibro feeder to fit…
P
Printables
Remixed 4-colour filament buffer with check valves
4-Colour Buffer for Elegoo Cenatauri Carbon / 3DChameleon MMU.
P
Printables
Remixed Insert for Modular Prusa Core One Filtration Unit
This is a modified version of @z073’s replacement for the Advanced Filtration System. Variations between filter brands, and even within the same brand, can lead to occasional interference, friction, and potential damage during insertion…
P
Printables
Container plug remixed
Tired of your PTFE tube getting pulled in and causing a jam? Try our new revolutionary plug! It stops the tube from sliding in unless you use lube. Patent Pending (on the specific method of wasting a perfectly good Tuesday night). Now the…
P
Printables
Remixed Camera Shelf
I liked the model and tweaked it to hold a camera in my window. I changed the column width so it can be mounted in more places and added more support to hold more weight.
P
Printables
Snapmaker U1 Screen mod remixed
I have my two Snapmaker U1 printers on a very low table. I could not read or use the screens as they were shipped because of the angle. I tried every mod that I could find and none worked as well as I wanted. I took two and combined them.…
P
Printables
Chair feet (remixed) with drains (updated)
Imported original STL in OpenSCAD, added (subtracted) drain structure. Actions: Download Take this model for a ride on your printer. Make Don't forget you can earn Prusameters (free filament and other cool rewards!) for printing out…
P
Printables
fender for the Prusa enclosure + holder for xLCD - MK4 / MK4S - remixed for original Prusa Flash Drive
*** Update September 2024: Added an adapted middle piece that fits the new MK4S cover, that has slightly different dimensions vs. the MK4. *** Update July 2024: I added a remix where the center piece accepts th flush xLCD cover by…
P
Printables
Fireball Template remixed
Remix of https://www.thingiverse.com/thing:3824411 . The original model is unchanged, but I created a 3mf project in prusaslicer to capture the following changes: Lay flat Shrink XY to exactly 203.2mm (8 inches), instead of slightly more.…
P
Printables
Remixed Spirit Island Trays
You need some more Parts which you can find here: Split Up Spirit Island Trays von KarnEdge | Kostenloses STL-Modell herunterladen | Printables.com or here: Spirit Island - Easy Setup All In One Organizer by trita - Thingiverse
P
Printables
Ender 3 V3 KE camera mount / Kamerahalterung (Remixed)
Camera holder for Ender 3 V3 KE You can use this remixed screw: Camera screw Remix von Michl | Kostenloses STL-Modell herunterladen | Printables.com