1 / 4
Butterfly Knife / Balisong Toy (No Hardware Needed) remixed training blade — zdjęcie 1
1 / 4

Butterfly Knife / Balisong Toy (No Hardware Needed) remixed training blade

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a butterfly knife toy from thingiverse that i remixed beacuse mine blade every time it fell it broke.

Ocena
5 / 5
Polubienia
130
Pobrania
2090
Wydruki
6
Wyświetlenia
9061
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Balisong butterfly knife toy. If you beginner in flipping knives i recommend printing mine remixed version beacuse its more durable. Oryginal version is of course prettier but standing prints are less durable. 

Print settings:

  • Layer height - 0.10mm
  • Infill - 100%
  • No supports needed 

 

Oryginal assembly Instructions:

The first step for assembly is to separate the handles and blade from their bases. Firmly grip the base and snap it off. Next, use small pliers to remove the supports from the pin holes at the top of the handles and bottom of the blade. File down any material left in the pin holes from the supports. I recommend using a small circular file but a knife would also work.
The blade pins should have a very loose fit with the blade and a tight fit with the handles. Also check the fit between the blade and the handles. If it is too tight and does not rotate smoothly, file down the inside surfaces of the handles until it rotates smoothly. Once everything fits together smoothly, use a flat head screwdriver to screw the pins in place. I would also recommend applying a plastic lubricant on all contact surfaces.

 

 

Tagi