1 / 4
K1 Max 270° Door Hinges (remixed)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Door hinges that allow the front door of Creality K1 Max to swing open 270 degrees.
- Ocena
- 5 / 5
- Polubienia
- 52
- Pobrania
- 472
- Wydruki
- 6
- Wyświetlenia
- 2898
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 6) (Komentarze: 9)Remiksy (0)Kolekcje (84)Powiązane
I remixed the original version of @RIBsfit's design to correct most of issues that reported by @Mordiev.
- 2 M3x8mm and 2 M3x16mm screws are still needed to tight the hinges to into the frame.
- The backplate is not neededed but 4 M3 x H6mm x OD5mm heat inserts are still needed. They will be inserted to the door-side hinge part.
- Thickness of the door-side hinge part has increased to not need a separated spacer.
- Paint-support in orca-slicer was used to add support btw the frame hinge part and door-side hinge part.
- Lastly, I don't open the door completely 270 degrees due to small space, so I did not test or use the door latch, but I think that it should still work with the door latch.
Updates:
- Added 2 small parts (1.5mm thick) to print with TPU as pads between glass-door and door-side hinge part in case someone need them.
Happy printing!