1 / 4
K1 Max 270° Door Hinges (remixed)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Door hinges that allow the front door of Creality K1 Max to swing open 270 degrees.
- Rating
- 5 / 5
- Likes
- 52
- Downloads
- 472
- Makes
- 6
- Views
- 2,898
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I remixed the original version of @RIBsfit's design to correct most of issues that reported by @Mordiev.
- 2 M3x8mm and 2 M3x16mm screws are still needed to tight the hinges to into the frame.
- The backplate is not neededed but 4 M3 x H6mm x OD5mm heat inserts are still needed. They will be inserted to the door-side hinge part.
- Thickness of the door-side hinge part has increased to not need a separated spacer.
- Paint-support in orca-slicer was used to add support btw the frame hinge part and door-side hinge part.
- Lastly, I don't open the door completely 270 degrees due to small space, so I did not test or use the door latch, but I think that it should still work with the door latch.
Updates:
- Added 2 small parts (1.5mm thick) to print with TPU as pads between glass-door and door-side hinge part in case someone need them.
Happy printing!