The last Shifter mod you'll ever need... - Remixed Logitech G29 G920
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The last Shifter mod you'll ever need... H-Pattern + Sequential Shifter remixed for better durability and stiffness
- Ocena
- 1 / 5
- Polubienia
- 66
- Pobrania
- 451
- Wydruki
- 0
- Wyświetlenia
- 3717
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
>>>Newer Altered Version Available<<<
I am using Sunlu PLA+ and had to reprint the slider multiple times after just a few days.
I modified the slider for increased durability and smoother movement, and I remixed the top plate for added stiffness.
(With PLA+, it feels very stiff at first, but this will decrease slightly after a few hours and will probably break after a few weeks)
I also added smaller sequential shafts for 8mm springs.
(Use a washer plate for the body to prevent slipping.)
The top plate can be used without slider and bottom part but it's less stiff
Sliders can also be used with Original model by Knowpistons
My Print Settings
Slider
- 100% Infill
- 2 Walls
- 0.2mm layer height
Top plate
- 25% Infill Gyroid
- 6+ walls (or the mounts will break when using sequential shifting)
- 0.2mm layer height
- Organic support
Others
- 25% Infill Gyroid
- 4 Walls
- 0.2mm layer height
Update:
- top_v43 with slightly smaller guides to prevent breakage during harsher shifting reworked
- slider_v42 reworked
- alternative sliders added