Liczymy pasujące modele…
Simple sleeve cover for Logitech BRIO webcam. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.1mm Infill: Standard Notes: I rotated flat side down to print avoiding rafts or supports. Might print…
Simple replacement for the keyboard foot, fits K270 K260 K275 K200 models
After having the scroll wheel break on my Logitech Anywhere MX mouse while it was in it's soft case in my backpack, I set out to make this hard case so I can throw it in my bag and not worry! My first step was to use my school's 3d…
Print to scale, suggested about 5cm side.
This camera rail-mount / holder allows you to change the height and Z-axis rotation of your camera. Using the joint on the camera you can also change its pitch. The rail can be mounted vertically on the leg/side of the enclosure. You can…
Hello. This is my remix for a Logitech mouse m650 stand/holder.
Tightening the nuts on your Logitech G27, G29, G920, or G923 steering wheel doesn’t have to feel like an arm-wrestling match with a gorilla. This wrench, based on the original design by magno23 (thanks for the initial work!), has been…
Simple and light K400 holder for my sim rig. It could fit other keyboards, i have no idea - feel free to try and let me know. It's not designed to use the keyboard on it, only to rest it while not in use. It appears to hold fine if doing…
Replacement feet for the logitech G915 keyboard (both with and without numpad). Background : I printed out riser attachments for the feet so that the keyboard is at around a 20-30 degree incline. This however over time hurt my wrist so i…
-Parts List: M3 Screw (atleast 16mm long) M3 Nut (can also be replaced with a threaded insert) Plastic Glue -Assembly: Put some grease on the shaft then put one half of the knob on the shaft so it slots in and can rotate freely then glue…
El modelo necesita 4 tornillos de M3.5 y corona de 7mm. Está hecho para que no tengas que usar soportes. Sus dimensiones son 120x80x69mm.
I double-sided taped it to the top panel and used the wire organizer to run USB cord. Mount Uses one M3x30mm bolt with M3 Nut
You need to calibrate the tolerances to print good and i recomend to put organic supports.
WARNING : Mouse will not fit correctly without the 40° riser. A box for Logitech MX Ergo mouse with a 40° riser . All risers should have the same base shape, but I can't guarantee that lower angle risers will work. Features Protected in…
For the flat models, print flat-part down, Organic supports, supports on build plate only. For the Skadis models, print flat/skadis down, with either: Organic supports, supports on build plate only. I have an MK4s and set “Overhang…
This design adjusts the angle of the throttle quadrant 30 degrees to a more comfortable flatter angle. I designed it to match the angle of the throttles seen on airliners and other aircraft. For easier storage it is printed in multiple…
Print settings: nozzle: 0.4mm layer hight: 0.2mm supports: none Adapter: infill: 20% infill pattern: Adaptive Cubic perimeters: 2 brim: optional (I didn't use it) Knobs: infill: 20% infill pattern: Adaptive Cubic perimeters: 2 P.S. For me…
A replacement for the Logitech shifter inspired by those irl katana shifters, a little scuffed since it's my first upload I used PETG and put regular supports under the hilt, which is what it's called. The supports came off as the shifter…
This model is designed to take a USB C port for a detachable cable. A version is available with an opening for a regular USB port for the wireless dongle. Uses two M3 bolts as contacts, make sure your bolts are attracted to magnets and…
This is a lightweight mod for the Logitech M720 Triathlon. I measured a 30g difference on my mouse, and aftermarket feet make it feel even better but are not required. A bit of sanding may be required in the base's battery compartment.…
This is a replacement for the keyboard foot for a logitech k270 Printed quickly as .4 nozzle Prusa MK35 infill at 60% just in case more strength needed used Anycubic PLA+ Filament no supports
A longer arm to observe from a different angle. printed in two parts to minimise the need for supports. joined with m3 bolts and nuts.
I've been carrying my M650 L mouse around in my backpack and didn't want it to get damaged. This housing sits in the backpack (with the mouse oriented on its side) and with the relief on the bottom it's easy to get a finger underneath to…
This is a remix of DavisSgt's zerømouse mod for the Logitech G102/203, which was initially inspired by optimumtech . DavisSgt's model will not fit if your G102/203 is the 2ⁿᵈ generation LIGHTSYNC version. You can verify by checking the…
DIY Mouse charging dock which works with any logitech mouse that is Powerplay comatible as it uses the two charging connectors on the bottom. Part list: 3D Printed parts: 1x Base 1x Coin 1x Body Electronics: 1x TP4056 usb-c board 2x ~5cm…
INFO A quick and easy way to mount your Logitech C270 camera to your enclosure tent. I designed this camera mount to be used with the Aukuoy enclosure from Amazon. It should also work with any other enclosure using rods with an 8mm…
I wasn't satisfied with the Logitech Saitek Throttle quadrant and wanted something that more closely simulated the experience of flying a Cessna 150/152. So, taking inspiration from other projects (including this one ) I set about…
Mod for Logitech G29 , G27 , G25 , or Driving Force GT pedals by replacing the stock potentiometers with Hall effect sensors for smoother, more precise input and zero wear over time. This printable bracket makes the conversion simple and…
Print material: PETG recommended Print settings: CR10-SE C920 Mount: 5 Perimeter walls, 4 bottom layers, 4 top layers, 25% infill Camera Antivibration top clamp: 9 Perimeter walls, 4 bottom layers, 4 top layers, 100% infill…
UPDATED VERSION ON MY PROFILE Printed from PETG with supports. 8 magnets 5mm diameter 5mm height press fitted. I cleaned every hole with drill before pressing.
It takes two M3 16mm screws to put it together (though you may be able to use the original C270 pin for the camera mount part) and slides onto the stock ender 3 frame. You only need to print the Stem and Arm (The bracket STL is just an…
This is a remix of the Billnis remix which is based on the EunchanPark's original model from 2020. I had to make the remix because none of the Amazon links work anymore and my best guess for an available LED ring did not fit the model. I…
I didn't have a screw driver long enough to attempt to use the same fastener that's on the shifter already, but it is a good enough friction fit where the concern for the knob coming off is minimal. Slight sanding needed to allow for a…
The coolie hat of my old Logitech X52 hotas broke just while I was landing my space ship. After being annoyed for some seconds I designed a printable replacement. Be warned - this repair is not for beginners. It includes small screws,…
Have a spare Logitech C920 camera and want a printer camera for your Prusawire? This 3-part print replaces one of the bearing clips with a camera mount. This is compatible with Prusawire Beta 1 and Release 1, but you should reprint the…
Welcome to my first add. Most any material and settings should work for this. I printed several successfully without support on an MK4S (the nubs are so small they don't stick out far enough from the side to allow gravity to effect the…
Mouse case consists of base and cover. Magnets are used in this model 5mm diameter 5mm height 4pcs for cover 5mm diameter 2mm height 4pcs for base (pause necessary to insetr magnets) CHECK POLARITY BEFORE PUTING MAGNETS IN PLACE Test…
Logitech RS shifter bracket for Playseat Challenge
i dont have any sockets in my home and i needed to undo potentiometer screw in z207 and its tight there, so i made an extender
This design is based on a Raspberry Pi camera mount that I modified from Andy’s Y-axis mount for the Ender 3 V3 SE. However, once I started printing in an enclosure, the Pi camera began to overheat. That led me to dig out an old Logitech…
Two versions available. Large single print or 2 pieces interlocking dovetail for smaller print bed sizes. -No supports needed. Use at least 4 walls & 8 bottom/top layers for strength. 4 mounting holes with countersunk nuts (M6) metric…
Variants of the parts by Ilyas Sofian. - Lighter baseplate with cutouts - Comfort groove on the mouse clicks. Also 1mm extended for more travel clearance. https://www.printables.com/model/811624-logitech-g1008-mod-g703-shell-g305-pcb
I made this to replace the battery cover with a reinforced design. This honestly took way to many iterations then I want to admit. Print Settings: PLA+, 30 infill, support everywhere, print vertically(very important!!) Please enjoy
This model serves as a replacement part for the Logitech Group camera mount. If the base breaks off due to a fall, it can now be repaired.
This project is a futuristic headphone stand designed with a clean sci-fi aesthetic and a strong focus on functionality. The shape is inspired by flowing, organic lines combined with a minimal cyber-style structure, making it look like a…
To use this you'll need to remove the stock mount. Behind the webcam, on the hinge, you can remove a couple rubber stoppers to expose a screw which can be removed. Push out the plastic plug, keeping the screw and plug. The printed part…
My Logitech C270 webcam works great, but covers the top of my screen on my thin bezel monitor, making it difficult to move between tabs or close windows when covered. This simple clip-on shim is designed to improve the fit of the Logitech…
This variant of a Logitech K860 ergonomic keyboard foot comes with a flex. Quite literally. The "legs" are bent outwards by 3° each, giving it a perfect snug snap fit into the keyboard. This fixes the problem I've had with the other…
UPDATE V5 - Added RIGHT Brace to support Logitech Cams - Brio100, C270, etc UPDATE V4 - RaspiCam Case - Added one more version that is flipped 180 degrees to have slightly more height - 5mm approx and added a ribbon guide UPDATE V3 - for…
I merged together the official g502 plate model and a nice finger rest I saw on here but didn't like it going behind the mouse. I also added a little slot for 5,2mm radius magnets. It's a bit tricky to mount it but it's worth it
🔁 Compatibility The 3D prints can be used on any Logitech G29 , Logitech G920 and Logitech G923 . The only print that's specific to a Logitech variant, is the lower bezel , which at the moment is available only for the G29, or PS4/PS5…
Just stick it with double side tape to your keyboard
Modified tool arm that connects to the MakerGear M2 tool holder modeled by Myt3chguru. https://www.printables.com/model/ The model was adapted to strengthen the camera arm and allow for a Logitech C270 to attach to it, similar to how they…
Anycubic I3 Mega has two pushed out holes on the X axis support box, this bracket snaps in place with out the need for tape or glue. For this model, I’m showing and using the E5150 B525 cover, but you can use any of their covers for the…
Some Logitech mice are known to develop scroll wheel issues over time. The pin/rod that rotates the scrolling mechanism inside gets worn out after a while and starts skipping. I used to buy replacement wheels online but they also tend to…
This printed fine in PLA. My supports were looking weird so I split the part in two as seen in mx_ergo_cover.3mf. It certainly doesn't print perfectly and may need some trimming near the back, but with minimal supports this was enough for…
I created a lens cover for the Logitech StreamCam that lets you mount a 52 mm camera filter.I used the cheapest polarizing filter I could find on Amazon (Amazon Basics): https://amzn.to/4qpKkFv A polarizing filter reduces reflections,…
A snug travel case for your Logitech M705 wireless mouse. Print the case body on the butt, so that the opening is facing up. The lid is available with and without the Logitech text.
Logitech HD Webcam C270 support Camera Raspberry video de surveillance
EDIT: New updated version here. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ I printed this using Elegoo PLA, using the 0.20mm Standard 0.4 nozzle profile…
Since I have a small desk and every inch of space counts, I was looking for a way to move my speakers off the desk. The combination of these two remixed models seemed like the best solution. You will need to print: 2x…
Printed with PLA on a Prusa CoreOne with 20% 3D Honeycomb infill Made in Onshape: https://cad.onshape.com/documents/bf7d0a88412e10a241a263f6/w/cb05aee4a10239476782e0d7/e/3ec4b1d98ab2576bd8b8e775
I wanted to keep my Logitech Z407 side speakers off the desk for a nice minimal look so I designed this speaker mount for the SKADIS pegboard that is mounted behind my monitor. Fits the speakers in both the horizontal and vertical…
Мне не нравится эта балумбула перед лицом, она выглядит несуразно и неудобна при использовании наушников с телефоном. Я решил это исправить уменьшив размер микрофона. Заказал с китая пару микрофонов, один из них полностью разобрал оставив…
Used PETG material to print this model. Black is shown in the photo but also printed a white version as this doorbell tends to overheat in the summer with sun exposure.
This is a webcam holder designed for the Flashforge AD5X 3D printer. It is primarily made for the Logitech C270 , but can also be adapted for other similar webcams. The mount can be used together with the original Logitech C270 mounting…
For fixing a hanging thumb button I needed to open up my mouse. Ever since the sliding pads have been mildly infuriating; hanging on my mouse pad and not staying flat/smooth. Printed using PLA with 0.4mm nozzle and 0.15 layer thickness.…
Logitech G25/G27/G29 Bearing Housing remix from ataylor's model ataylor's model is a promising fix for the G27 housing but it requires a lot of filament and takes a while to print (almost 8hrs for my Ender 3 V3 SE). Granted that it's for…
A replaceable headband for the Logitech G733 Headset. Uses a one piece design. printed with Polymaker TPU 95 on Prusa Mini w/ Supports. Remix the headband to fit your head, I have uploaded a STEP file to reference the mounting slots and…
Logitech C270 Tool-Free Camera Mount – Creality Ender-3 Series A simple and clean tool-free camera mount designed for the Creality Ender-3 family (V1, V2, V2 Neo, S1), compatible with the Logitech C270 webcam. This mount clips directly…
The original pinholder has a tendency to break with age. A simple fix for an expensive piece of gear.
Ich wollte eine Halterung die auch das Handy aufladen kann und einfach funktioniert
Brio 101 bracket remixed for the Multifunction Arm System.
Keycap compatible with the wireless Logitech k400r keyboard. I split this keycap into two parts so the connector can be printed lying down because otherwise it wants to catch on the keyboard forcing the user to press in the center of the…
3x2x4 shadowbox bin that fits a Logitech M705 Mouse
Ich wollte meinen Logitech Cube und den USB-Dongle sicher aufbewahren. Damit habe ich alles zusammen sicher für unterwegs.
The Next Level Racing GTLite Junior does not include a shifter mount, and Next Level Racing does not sell any accessories to attach a shifter to this cockpit, so I decided to make one for my kids sim rig. The 2 upper clamps may be a tight…
This is a moutning plate for the Logitech shifter and a generic sim handbrake on a GT Lite foldable seat. Here are the print specs I used: PLA+ 200C 40% infill All walls 2.5mm (VERY IMPORTANT) I use UltiMaker for the modelling and print…
I bought a used K845 that was missing one foot. I took @madokurt's K345 feet, significantly modified them in TinkerCAD, and printed them in ABS.
Je voulais voir la buse, ce support est à la bonne hauteur (à mon goût) Imprimé sur Elegoo Neptune4 Plus Elegoo PLA 0.20mm Temps d'impression: 1h 25m
Motivation I wanted a nice looking and hidden camera mount for my C920 . So I made my own. Parts and BOM You'll need the camera and 2x m3 8mm or (2x 10mm?) BHCS screws and 2x m3 T-nuts. Printing Print as provided. Please use support for…
This is a mount for the logitech Z407 speaker. It is attached with hardware from the monitor so na additional costs.
Nice mount for attaching your Logitech RS H shifter to 4080 aluminum extrusion.
Wanna put your keyboard on your radiator? Print two of these and do it! If you like my work, consider buying me a coffee: https://ko-fi.com/maildannesholkse
A multi part printable shell casing for a Logitech C920 / C930 Webcam, removed from the manufacturer's shell. NOTE: I've updated the files: Removed the mount i previously designed to be printed, and updated the design to implement the…
Print Settings & Hardware Nozzle: 0.4 mm Material: PETG recommended for durability. Hardware Required: 2x M5*25 screw and nut . Supports The model is designed to be mostly support-free. However, for the best results, I recommend adding a…
