Shift Knob - Logitech G Driving Force Shifter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement shift knob for Logitech shifter
- Ocena
- 4,786 / 5
- Polubienia
- 122
- Pobrania
- 1399
- Wydruki
- 18
- Wyświetlenia
- 7680
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update: Added a tolerance test based on feedback from makes. Please check fit with this part and adjust XY scale for desired fit before printing the whole part.
Background
I took the basic design from my M12x1.75mm shift knob and adapted it to my new Logitech Driving Force Shifter. It's a direct replacement and the extended cylindrical profile provides additional feel/reference to the shifter gate locations vs the round knob. There is a drafted D-profile to make for a snug, wiggle free fit when installed.
* For even better feel, search for “logitech shifter screw mod” which adds a cap head screw on the detent spring to slightly increase spring preload. The slight increase in detent force goes great with this knob.
Print Instructions
Printed in Overture Black PETG @ 0.3mm layer, 4 perimeters, 20% infill.
Installation
Pop the cap off factory knob, remove phillips screw, replace knob & reuse screw.