Liczymy pasujące modele…
simple design of these VDV paddle shifter designs to fit onto Thrustmaster Sparco button boxes (P310 and R383) reccomend printing with a lot more walls and dense infill to make them as solid as possible, i printed mine with 6 walls and…
Its an Shifting Stick for the Seat Ibiza 6J You need an M4 Thread drill and 4x M4 Screws with a length of 10-70mm (DIN912)
El modelo necesita 4 tornillos de M3.5 y corona de 7mm. Está hecho para que no tengas que usar soportes. Sus dimensiones son 120x80x69mm.
6X3X2.5 mm bearing X4 Wire diameter 1.2mm, inner diameter 10mm, length 12mm Spring X1 Hose clamp X1 insert molding nut M3 5mm X3 M3 screw 10mm X3 zip tie 150mm X2
As I'm switching from end bar shifting on a U bar to flat bar shifting on a T bar on my recumbent, I designed this to still use my Shimano SL-BS79. Symmetrical. No need to disassemble the levers to adjust position. Should work also on…
I recreated these shifters using photos and datasheets provided by Cosworth. They originally are part of the entire CCW MK3 wheel design, but as that won't be finished for some time, I decided to release them as a standalone design so…
Held on a playseat challenge thanks to this design: https://www.printables.com/model/302265-playseat-challenge-shifter-holder-shortened-attach The controller board and wires…
Print settings: nozzle: 0.4mm layer hight: 0.2mm supports: none Adapter: infill: 20% infill pattern: Adaptive Cubic perimeters: 2 brim: optional (I didn't use it) Knobs: infill: 20% infill pattern: Adaptive Cubic perimeters: 2 P.S. For me…
A replacement for the Logitech shifter inspired by those irl katana shifters, a little scuffed since it's my first upload I used PETG and put regular supports under the hilt, which is what it's called. The supports came off as the shifter…
I needed a replacement bar clamp for my SRAM flat bar shifter, and wasn't happy with how much flex I was getting with a printed one. This replaces the standard bar clamp with one that mounts to both holes in the SRAM shifter, allowing for…
Tighten up your shifter even more than what you can get from just the shifter base bushings alone. Not many have dabbed into shifter cable bushings for this car. For other manual cars, many performance shops do this as soon as the new car…
I made ball shape gear shifter that fits well in average hand, and is directly mountable on TH8S shifter.
3D scan of the top cover for the paddle shifter mechanism in the 599xx rim. Should be the same part in most TM rims with the older paddle shifter mechanism. The axle part of the mechanism is available on printables (and other sites) from…
Logitech RS shifter bracket for Playseat Challenge
Magnetic paddle shifters in a form factor of a kitcard . Required hardware listed below: WK812 Limit switch M3 bolts and nuts (M3x18 or M3x20) M5 bolts and nuts to assemble the paddle (M5x40) 625ZZ bearings Bearing washers Magnets (15 mm…
Two versions available. Large single print or 2 pieces interlocking dovetail for smaller print bed sizes. -No supports needed. Use at least 4 walls & 8 bottom/top layers for strength. 4 mounting holes with countersunk nuts (M6) metric…
This works flawlesly. you need just 2 pieces of D30mm x 10mm rubber https://www.kaufland.cz/product/435437096/?kwd=&sour
For increased durability, print the part in a horizontal orientation. Longer bolt is required for the installation
Designed this to angle my Aliexpress sequential shifter at 10 degrees and raise it above my other shifter. It also has mounting holes for a bass shaker, and it is incredibly sturdy. I have included the fusion file if you would like to…
for printing, flip upside down and add supports in the top. not jeep tested and may need a few prototypes before getting correct size
This is a slide- on mod for the Aliexpress H pattern shifters, it blocks it from going into 7th gear, or both 6 and 7. You simply place it down on top of your shifter and it should hold itself in place well! The IPT file is also included…
The pastic collar that engages with the reverse lockout cable in a mk2 Ford Sierra 4x4.
Originally designed for CfMoto 450NK, but I have included a Fusion360 and STEP file so you can change the dimensions to fit your motorcycle. Printed in TPU
Streamdeckplus holder at shifter for Fanatec GT Cockpit
An adapter for use with the MAN TGX shifter, specifically designed for the Bash Pro sim shifter but works with any M8 threaded bar. Printed in TPU for a little flexibility (sizing based on a small amount of shrinkage) this will be a snug…
Replacement bushing for the IB5 manual transmission, used in various Ford models such as: Focus, Fiesta, Fusion, C-Max, etc. Designed as a direct replacement for the gear shift selector bushing, which commonly breaks over time and causes…
A dovetailed 4080 mount for the SHH Newt sim racing shifter which allows it to be quickly swapped out for my DIY 3D printed sequential shifter. Printed with PLA, 4 walls, 15% infill. The shoulders of the 4080 mounting holes are printed…
I bought a fanatec universal hub V2 and was not happy with the shifter panels. Their arrangement regarding to the wheel (I have quite a large one with some distance to the hub) felt off. So I made new shifter panels and included counter…
Note: after using it a while I decided it needed a bit more resistance when shifting and just stuck another magnet on the magnets in the cups. Flash the Arduino following the instructions provided by SimHub. SimHub Arduino setup -…
Retaining Clip and sleeve for my 01 Jeep Grand Cherokee Transfer Case. Swapped from a 247 to a 242 HD transfer Case. Clip fits both at the transfer case and the shifter itself. Designed to retain the shifting cable for the transfer case.…
You must use the old metal housing. Printed in FLEX and glued inside. OEM: 25111222015 Strongflex: 031933 Should fit: BMW 1 E81 E82 E87 E88 BMW 1 F20 F21 BMW 2 F22 F23 BMW 2 M2 F87 BMW 3 E36 BMW 3 E46 BMW 3 E90 E91 E92 E93 BMW 3 F30 F31…
Shifter paddles for the excellent AMG GT3 steering wheel project by Turn Racing https://www.printables.com/model/337686-turn-amg-gt3-diy-sim-racing-wheel This includes the Up and Down text as a two colour print. There are also single…
I couldn't find a shifter console insert that I quite liked so I made one meself. This one will have to do. I put some vintage Toyota writing on it from the public domain. If I can improve it with some molle holes or lasers or something…
Magnetic Shifter Mod This model is a magnetic shifter mod for the MOZA Racing ESX Steering Wheel. The mod will improve your shifting feel. It will feel shorter, more direct, and more aggressive. You can print it without any special…
Uses basic imperial screws, if I get enough downloads, I'll make a metric version. When slicing, be aware that there are nuts that should be paused and placed in the model. Expect different style of nobs in the future. This is also tested…
Shift bezel for a 1979-1980 manual RX-7. You will need a new shifter boot that is of sufficient size for this. I made my own and can upload the templates a bit later once I finish tweaking them. To assemble you will need 12 M3 heat press…
The Next Level Racing GTLite Junior does not include a shifter mount, and Next Level Racing does not sell any accessories to attach a shifter to this cockpit, so I decided to make one for my kids sim rig. The 2 upper clamps may be a tight…
VW Up shifter boot trim. Dimensions arent exactly precise but it fits.
This is a moutning plate for the Logitech shifter and a generic sim handbrake on a GT Lite foldable seat. Here are the print specs I used: PLA+ 200C 40% infill All walls 2.5mm (VERY IMPORTANT) I use UltiMaker for the modelling and print…
Nice mount for attaching your Logitech RS H shifter to 4080 aluminum extrusion.
Remix of already created model which works great. Reason I created this was because these shifter cables are often cheaper and easier to buy (atleast where I'm from). Print it flat and with around 80% infill. Dont use supports, overhang…
There was no mount for a PXN SF U Shifter to a Logitech Challenge X and the existing one for the Moza shifter has been done in crappy STL format which is totally against the community-centered 3D-printing idea, so I remade everything from…
Robust mount with a shorter cantilever for higher strength and stiffness
Helps children change gear easier. Secured with three stainless steel M3 bolts and heat set threaded inserts. Feel free to use the included FreeCad model to change to any other type of fastenings. Printed with the "lid" flipped with the…
You need one insert, 6 wide switch brackets (black and purple in the photo), and 2 narrow switch brackets (yellow in the photo). Parts: (8) Omron SS-5GL2 snap switches Arduino Nano ESP32 (18) M3x8 socket cap screws (18) M3 heat set…
The shifters are easy to build, work well and have a nice feel Assembly is quite simple and straightforward Magnets are pressfit inte the printed parts Screws go directly into the printed part except for the mounting were brass inserts…
All the adapters i found did not fit the shifter, So i made my own. This one is tight tolerance, May need to adjust the hole diameters for yourself. My shifter shaft is 7mmx9mm shaved circle with screw hole on top. The Shifter i made this…
centered the gates better for my shifter, does require you to file the usb slot on the back to fit
This enclosure is designed to house the Logitech G29 mainboard and provide clean, protected access to the pedal and shifter connections. It offers a compact and organized solution for projects where the original wheel housing is not used,…
2025-05-10 entirely new design https://www.printables.com/model/1292138-sequential-shifter-handbrake-buttonbox-combo-v2 2022-11-10 Added smaller ball versions for shifter to reduce weight as well as smaller screw, ball diameter choice is…
I shortened the fixation part to accomodate stiffening mods of the playseat challenge with it Here are the mods I am talking about: Brace https://www.thingiverse.com/thing:4944013 Joint Stiffening https://www.thingiverse.com/thing:2772442…
A sequential adapter to turn the inexpensive USB shifter (can be found for $50-100 on Aliexpress or Amazon). To install: Move shifter to left (inbetween 1st gear and 2nd gear) Place Sequential Adapter in shift gate, between 3rd gear and…
Shifter knob mod. Using original screw to mount the adapter, long shaft and locking to prevent breaking and over-tighten. Long version could be sensitive against breaking above the threadline. Short version in use since a few years. Screw…
This model was inspired by the design of DonKeulito . I needed to re-design the model as my angle of the tube it attaches to did have a different angle and I needed it for a different handbrake and shifter. The chair can still be folded…
DIY Paddle Shifter PERSONAL USE LICENSE ONLY Files are for personal use only, non-commercial and not for resale Copyright by KODAI Racing Features Large 15x5mm magnets Ball bearing movement Compact design Easy FDM printing A simple…
Subaru sambar Shifter bushings to my KS3 sambar 1995 May or may not fit KS4
Sequential Shifting adapter for Simjack H Pattern Gear Shifter Something came in the package to do similar, but it wasn't well measured so did not work well, so here's one that works better. Key features: Able to be installed WITHOUT…
The stock shifter has a neutral lockout pin to hold the shift assembly centered in neutral, which helps to install the shifter box into the vehicle and get the shift linkage tightened. However, most aftermarket shifters do not have the…
A shifter mount i made to side mount onto a piece of 8040 so that i could have both my sequential shifter from moza and my thrustmaster th8a (with trucking shift knob) at the same range from my seating position. Uses 4xM8 bolts (with…
Swing is a 3D shape shifting sculpture depending on the angle. This model is inspired by an art piece called Swing. The original is 50 feet (15m) tall with a rusty finish. When you drive around the sculpture you will see it's shape shift…
some extra parts and modified parts
This model is used to shift the motherboard of Sovol SV06 a bit to accomodate the motherboard fan mod as well as the nautilus fan mod. When I did the Type A fan mod for motherboard (Link Below), the nautilus fan was crashing with the 92mm…
Want to have a higher shift knob but don't want to increase the throw? Raise the whole base. Version 2 uploaded! All I did was make the center section thinner so it uses less filament. They are just there to make install easier.…
Logitech shifter screw extender for thinner mounting surfaces. print settings: any settings
replacement part for w638 vito need 1 oring to hold it in place
w638 vito spare part shifter windscreen trim clip
Some assembly required - Glue piece 1 on the bottom of the main body. USE ONLY A FEW DROPS ON THE PERIMETER, do not stick to the spring. Superglue/Cyanoacrylate works fine. Glue piece 2 onto piece 3 (There are a couple of divots to help…
I made simple mod for SHH shifter to use with sequential mode. It contains 2 parts: -the frame which you can screw to your shifter with original screws -and the plate that snaps to the plate with magnets. You would need 8 cylinder shaped…
Changelog: 12/02/2025 Added a 6+R version. Look for the “_6R” files. I checked everything in cad and it should work just fine but I did not personally test print (tested by c4tkybnm, check the makes). It may look a bit weird because I…
This accessory for the board game Heat: Pedal to the Metal by Days of Wonder helps keep track of where the gear shift pawn is for each player. It also looks cool on the table. You can print the top flat, and insert pauses at specific…
Shifter bushing for various Chrysler models (the small one) Made with what was measured off of the original Chrysler part my father-in-law took out of his PT Cruiser. I made a 2-part version aswell if you fancy a more original looking one.
These dummy shifters are modeled after the shimano grx shifters. They are basically fake hoods and thus the only benefit is to give you the same comfort as regular dropbar shifters. Main purpose is the fixie and indoor trainer bikes with…
Shifter knob for 70's GM models, modeled from the original in my '72 Chevrolet Opala (Brazilian market). US market GM Models should have a textured knob, but the design is the same. The knob is a press fit in the shifter. Should be…
Title: Cone - The shape shifter - A Hands-On Mathematical Exploration The Cone - The shape shifter is an innovative 3D model that visually demonstrates the fundamental principles of conic sections—one of the most important topics in…
Cammus C5 pedal shifter mod but without screws credits: https://cults3d.com/es/modelo-3d/juegos/cammus-c5-paddle-shifter-extenders
everything was printed in 1 color so not very clear to see they work great! micro switch i used was: Micro switch KW10-Z6P075
ok so its rugged but simple solution for the problem that i could not find any normal shifter base for my race sim MAIN PRINT INSTRUCTIONS 1. use tough plastic types PLA may be not enough ( i used ASA) 2. 3 wall min ( i used 4 ) 3. infill…
print .stl in PETG and predict some minor corrections by melting the nuts hot into their cutouts before assembling.
I am posting only the gcode for this model, because the sizing was adjusted in Prusa Slicer to be a perfect fit, and because this model was sliced as a multicolor part using three toolheads, with assignment of colors in the slicer. It's…
I printed “Status_Symbol_3d - Gearshift keychain”. Although it was a nice fidget, I wasn't satisfied with the action. So I decided to make my own version of a gear shifter fidget. I made it so there's a spring to return the shifter to the…
Magnets : Dimensions are 8mm x 8mm x 10mm. You can stack the magnets to achieve a total of 10mm without the need for glue. Since the magnets do not directly touch the metal, you'll need stronger magnets for this setup. Alternative to…
To mount the Fanatec 1.5 Shifter and one cheap Handbrake from Aliexpress to a Simrig based on alu profiles.
Simple mounting plate for the Fanatic Shifter 1.5 to mount it on aluminum profiles (80mmx40mm). But it should also work on the Shifter 1.0
simple design of these VDV paddle shifter designs to fit onto Thrustmaster Sparco button boxes (P310 and R383) reccomend printing with a lot more walls and dense infill to make them as solid as possible, i printed mine with 6 walls and…
A collection of custom Shimano Di2 satellite shifter button housings
I found that when using the thrustmaster th8a shifter on cars with less than 7 gears, i would sometimes accidentally put it in a gear that didn't exist. These gear blocker/fillers eliminate that issue when you are driving a car with 4, 5…
Just attach this handle and use 4mm plastic straps to tighten it up
this is an h pattern shift guide for the logitech g923. there are also options for a short and tall shift knob. you will need 1/8" longer m3 screws. if you are having issues getting the screws to line up flip the shift guide around, it…
I remixed the shifter extensions & knobs to include self support for the holes. See photo showing the underside of one of the remixed shifter extensions This should mean that you do not need to slice with support as I find separate…
Its a mousewheel for shapeshifter mouse print only on resin printers!!!
