Thrustmaster TH8A gear shifter gear blockers/fillers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I found that when using the thrustmaster th8a shifter on cars with less than 7 gears, i would sometimes accidentally…
- Ocena
- 5 / 5
- Polubienia
- 73
- Pobrania
- 585
- Wydruki
- 5
- Wyświetlenia
- 4461
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I found that when using the thrustmaster th8a shifter on cars with less than 7 gears, i would sometimes accidentally put it in a gear that didn't exist.
These gear blocker/fillers eliminate that issue when you are driving a car with 4, 5 & 6 gears.
They quickly & easily slide into the unused gear slots, physically making the th8a shifter a 4, 5 or 6 speed shifter without the need to buy/change the whole shifter plate.
This is great for when you are switching cars a lot in game.
I have put a file to print a set of 3 in the upright position.
they are a pretty quick print & nicer to print upright.
Also I have included the individual files.
Printed in PLA, these parts should be a nice tight/snug fit on the th8a.
7th gear is a slightly different design & fit to the other 2, which should fit in any of the other slots.
Any problems just write in the comments.
Enjoy & if you found this useful, it would be great if you could give it some feedback, a like or even post a make ;-)
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
No
Supports:
No
0.20
Infill:
20%
Filament:
prusa pla silver
Notes:
Parts will be plenty strong enough in PLA.
If you print in other plastics with different characteristics, slight adjustment to size may be required as i found printing in abs, parts were a bit looser fit in the shifter
Category: Video Games