Liczymy pasujące modele…
--- English --- Housing for the MT300N (Mango) and one of these chinese PoE splitters. Thus the devices have a significantly higher WAF. --- Deutsch --- Ein Gehäuse für den MT300N (Mango) von GL.Inet und einen der chinesischen…
MAGNETIC PADDLES Material needed : 4 magnets , dimensions 8*2.5mm , and for best feeling : N52 Cyanoacrylate glue , or any liquid superglue 2 pieces of double-sided 3M , or double-sided tape, 2*1cm Magnet properties and instructions : Add…
The cover is designed to fit without any modifications after removing the original rim. The cover is designed to fit without any modifications after removing the original rim from the button assembly. You need: -bar tape (optional but…
Tool box Parametric adapted to UNI-T UT300 series Environmental Testers. Case made with PETG, and the 4 compartments with TPU, all 0.20mm. Only use support on Lid for the recessed logo lettering. TPU prints, were made with 4 walls, 15% 3D…
Comgrow T300/T500 PTFE Tube Filament Feed Adapter Adapter for the Comgrow T300 or T500 that routes filament to the toolhead via a PTFE tube. Designed to work with ECAS04 push-fit connectors (without the black rubber gasket). Note: The fit…
My original T300 extruder broke twice so I wanted to make something that allows for easier maintenance. Currently still in a working prototype status this was printed in PLA+ at a 45° angle to increase strength of the print. I used 3mm…
Tolerances are tight. If the board does not fit, print the parts with 100,5% oder 101% scale. Use 8 M1,4x5mmm self tapping screws for mounting the board and lid. Use a M3x40mm screw for the USB brace.
Just after I made the GoPro-mount for my TP-Link TL-WR902 travel router , I decided to upgrade to the Beryl AX. As I use a GoPro-mount for mounting the router at a certain occasion, I had to make a suitable clip for the new router. I…
Adapter for the T300/T500 to Bambu Hot End. DO NOT ATTEMPT UNLESS YOU'RE MECHANICAL! -Prints with no supports PARTS LIST: Hot end: Bambu X1 clone https://a.co/d/dsEMpa1 Inserts: 2x M3*4 4x M2*3 https://a.co/d/7Aj9c0x Bolts: 3x M3 x 10mm…
ORGANIZZATORE GT300 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
Print in something really tough like ABS/ASA with enough walls so the fins are basically solid. Body with something from 20% infill up.
needed for assembly: micro limit switch "donghai" KW4-3Z-3 2 pieces. bearing 8х3х3mm spring 5х10mm bearing ball 5mm screw, washer, nut M3.
This model replaces the stock clamp screw on your T300 or T500 wheelbase and allows for a secure fit to your desk. What you'll need: 3D printer This 3D model file (available for download) M10 hex bolt screw (length 80mm or 100mm) 2x M10…
Quickly devised model that is in my daily use as mount for ERCFv2 to my Comgrow T300 printer from sovol. Mounted it on 90 degree angle to get the drybox next to the printer. Mount is mounted with standard screws and uses these models…
This is a printable mount for the Thurstmaster T300RS that will let you mount an Elgato Stream Deck. It's a great way to add buttons quickly to your sim racing setup without spending a fortune. It should be compatible with both the Mk1…
Print with the long face of the bracket on the build plate. No supports required.
There is room to secure a 6mm timing belt around the knobs to help keep the gantry in sync when the printer is in a powered off state. There are also numbers to help you adjust the sides individually if need be.
This is designed to hold the spool directly over the gantry with a 1" rod or dowel. Threaded rod is also viable.
Print with flared ends on the print bed. Using a brim is recommended.
Hall Sensor Bracket replacement for Thrustmaster T300 T300RS TX Worked for me, use supports and enough infill. Hope it helps someone
Printed this for my autohelm 3000 autopilot. I have the lever trimmed to fit my installation. The cog on the eccentric is just a bit bigger than module 1.25, so i used module 1.375. You can edit the cogsize in the assembly, I use it as a…
My T300 had a design flaw that enabled the bed heating cable to come contact with the sharp edge of the Z-tower aluminium support. As quick fix I taped the cable to the frame but to have some long term peace of mind I designed these which…
I use this on my current setup. V2, made oval of the mounting holes to make tolerance. You need m3 heat set inserts.
Supporto per volante t300, permette tramite i suoi aggangi di installare le mod al di sopra dello sterzo. Il processo di creazione, montaggio e installazione possono essere trovati al seguente link…
Adapter to use Bambu lab hotends on a Comgrow T300 You'll need: 2 M3 inserts 2 M2 inserts 1 small piece of PTFE tube 2 M3 x 20mm screws You may need to tap your hotend heatsink to mount the fan The M3 screws that hold the hotend go in…
a simple stand for the Sony SA-MT300 soundbar to better fit om a desk above a keyboard. I can be printed with only 2-3 walls, 15% gyroid infill I would advise a 5 mm brim just to be sure v2 added with small improvement in design
Hi Internet Sim Racing Hooligans, This is a super quick n dirt mount for the new Vocore sim display supported by Simhub. Wotever has made a very cool LCD case for the Vocore screen: https://www.thingiverse.com/thing:4668185 And using some…
Hi Internet Sim Racing Fans, Another quick upload by request. This is a remix of my original 70mm PCD Thrustmaster hub adaptor. Except this one is rotated 30 degrees to fit this…
Hi Internet DIY Sim Racing Peeps... This was a message request for a mod to the Thrustmaster 70mm hub adaptor by SpaceKnight. It's the 4 screw option for a project he's working on and wanted it 90degree rotated for his mounting needs. By…
This is a request from PLG_Designs. He was gratious enough to ask permission to modify my design. I was only too happy to make the changes he requested. All the best with releasing your AMG Wheel mate. It looks great! Cheers, RamjetX…
Hi Internet Sim Racers, After doing a final test print of my Thrustmaster Txxx 70mm hub adaptor kit... I feel it's ready for public thrashing. Ok, so whats in the pack I hear you ask... through some form of audio bug I have in your…
Hi Internet Sim Racers, If you've printed a 70mm Hub adapter from any other modeler, and you've decided you want to extend or put in an insert for your 6 Pin DIN connector in the hub to make it connect to the wheel like the original.. You…
The outrigger allows different types of cameras. The holes should be wide enough for a standard camera screw. Clip to the upright, bolt your camera to the flat or otherwise be creative. It's long enough for a wider camera to have a clear…
3/8" caster wheel adapters created to replace the existing feet on a DEWALT 41751 Workbench. Should also fit related dewalt storage racks as they are stackable with this unit, but I have not verified. When printed in PETG, these inserts…
Model is .2mm tall, and the lines connecting the points are .4mm wide.
This is a flip switch style button replacement for the DGT3000 Chess Clock. After heavy use, some cracks appeared in de original button turning the clock unusable. Assembling Before inserting the pin, both mounting holes should be drilled…
Tilton pedal with holes 22mm apart. It will fit the T300RS (2 pedal) for sure, as I have this one myself. If any adaption is needed for T3PA, LCM, ... Let me know the spacing required or send me a pedalset ;) use bit longer M3 bolts,…
This elongated buttons and D-pad button have been designed specifically for using by with adapter for Thrustmaster T300RS and steering wheel from of a real car.
--- English --- Housing for the MT300N (Mango) and one of these chinese PoE splitters. Thus the devices have a significantly higher WAF. --- Deutsch --- Ein Gehäuse für den MT300N (Mango) von GL.Inet und einen der chinesischen…
Like it says, I needed shorter legs to fit on a small shelf, and put some nice round padd feet on them. Figured while I was at it I'd do a couple variations; Added screw holes, or pockets for hot glue or other adhesive, and pockets for…
Connecting clip with beak for vacuum cleaner extension part. Recommended material: PETG Perimeters: 6 Spojovací klip se zobáčkem k prodlužovací části vysavače. Doporučuji materiál: PETG Perimetry: 6
need to be printed horizontally with no supports tested with PETG I made this strong twist-release clamp holder for Xiaomi T302/T300 toothbrush heads to replace the broken ones after printing this model in ABS:…
[ENG] Hi everyone, Thanks to @MoreSideways, I got into drifting in Assetto Corsa. Unfortunately, the narrow desk surface combined with its slippery finish makes it so that the steering wheel can shift during more intense movements, even…
Bonjour, Voici un remix du support de caméra personnalisé pour une caméra du type NORTEC Full HD 1080. je conserve la semelle en l'emboitant dans une rainure. Un clamp avec une vis M4 x 12mm permet d'abloquer la caméra. j'ai repris la…
A better way to attach your t300 wheel and you can skip the annoying screw.
This is a completely original model, and is the result of 16 different iterations on the design. I tried to create the most modular (for future adaptability to other wheels) and compact unit as I possibly could and printable without…
Thanks to wiki.Anycubic, where i could found the original model of this bracket. I took off the clippingpart only and i remodel it so it can be fixed where the black screws are (showed on pictures) on my T300. First try, on a friday, i…
Printed in PLA at 35% infill. I used tree supports for the overhangs, but not sure they are necessary.
MAGNETIC PADDLES Material needed : 4 magnets , dimensions 8*2.5mm , and for best feeling : N52 Cyanoacrylate glue , or any liquid superglue 2 pieces of double-sided 3M , or double-sided tape, 2*1cm Magnet properties and instructions : Add…
Description and photos can still change, design files are already final and system is operational on the desk A connector for the exhaust tube to the outside is not yet designed. The original S.O.G did not fit my requirements. smart…
EN: Recommended filament: PETG Recommended layer height: 0.1mm Recommended infill: 30% Recommended wall count: 4 You can use these settings for strength. NOTE: If you print the clip section with 100% fill from the slicer's modifier…
My dad bought this cheap dashboard camera off the internent and I mangaed to break the mout that connects the camera to the suction cup. Thought would would try and fix it. Print Settings Printer: Creality Ender 3 Rafts: Doesn't Matter…
Comgrow T300 Bottom Cover 120mm Fan mod. Remix from a good 80mm version
I was browsing youtube and saw people talking about buying magnetic mods for the Thrustmaster T300rs wheels, and got to looking, these are on ebay for $15-17 but ship from china, so it takes forever. So, I designed this magnetic shifter…
Just made the magnet holes a little smaller to hold a thinner 12mm magnet. Category: Hobby
Remix by Jan‑ E.de (@JanEde) -> https://www.printables.com/de/model/631877-mounting-clip-for-travel-router-beryl-ax-with-wall I removed the screw holes and added a flat surface so the mount can be attached with tape instead of screws.…
I recently designed and manufactured this case for my (H)yper (T)ough 300 OBDII that I purchased from Walmart for under $50. As you can see I have provided a little cheat sheet on the front cover of this model, when you run a code you…
The cover is designed to fit without any modifications after removing the original rim. The cover is designed to fit without any modifications after removing the original rim from the button assembly. You need: -bar tape (optional but…
Tool box Parametric adapted to UNI-T UT300 series Environmental Testers. Case made with PETG, and the 4 compartments with TPU, all 0.20mm. Only use support on Lid for the recessed logo lettering. TPU prints, were made with 4 walls, 15% 3D…
Comgrow T300/T500 PTFE Tube Filament Feed Adapter Adapter for the Comgrow T300 or T500 that routes filament to the toolhead via a PTFE tube. Designed to work with ECAS04 push-fit connectors (without the black rubber gasket). Note: The fit…
My original T300 extruder broke twice so I wanted to make something that allows for easier maintenance. Currently still in a working prototype status this was printed in PLA+ at a 45° angle to increase strength of the print. I used 3mm…
Tolerances are tight. If the board does not fit, print the parts with 100,5% oder 101% scale. Use 8 M1,4x5mmm self tapping screws for mounting the board and lid. Use a M3x40mm screw for the USB brace.
A case to hold a Tile Mate T3001 tracker together once you split it apart to replace the battery. Simply insert a blade in the seam, pushing gently towards the front. Your blade should slip in about 1mm, try not to insert it further.…
Reinforced replacement for the shift pedal hinge for the Thrustmaster T300 racing wheel. It should be the same part for the T150. For a smooth operation print the hinge in 0.1 mm layer height. I additionally added a drop of grease. Should…
3D printed custom pulley for the Thrustlaster T300RS wheel. Since the outside diameter of the original shaft isn't compatible with standardized beartings, i decided to design a custom one. 2 Bearings are needed : -1x626 (19x6x6 mm) -1x696…
files created for my t300 rs gt wheel, feel free to try on other models/ edit if needed tested on 60x60x15 mm noctua fans holes for screws are intended for the factory mount already there for a braket not tested if its better or not but…
I wasnt happy with some of the designs available, so I designed my own custom mount for my Thrustmaster T300. Give me a like if you find this useful Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes…
I own stepper motors with backlash 2-3 degrees here: https://www.aliexpress.com/item/33013995007.html?spm=a2g0s.9042311.0.0.1e2f4c4dkh4ZN8 Please test your motors and write link to the store in comments. Print Settings Printer Brand:…
Same as my design for the Huawei P8 lite, just resized it. Should print without support. Didnt trry to print yet, let me know if you have any issues. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
Honestly, I haven't even sawn thru my original end blocks yet. I just read about folks who were looking for replacements, so I wanted to try drawing these up. Then I found that someone on Thingiverse had already done it. Oh well - I think…
I made this case to create something tidy for my wall mount of Tenda P200 powerline and glinet router to extend my wifi at home. Maybe useful also for you. My advice is to paste with vinyl glue the two pieces to avoid support on printing.…
My modification of Peters Dashboard for TM wheelbase with fan controller, two fans and display. Display panel is made of one OLED 0.96" display and two WS2812B PCB modules . Fan controller is based on mini Arduino Mega 2560 clone, two…
This is Magnetic Paddle Shifter MOD for Thrustmaster T300 RS. BoM: 1x 5mm or 8mm bracket 1x M3x10 1x M3 nut 4x 10x3 (or 8x 10x2) mm Neodymium magnets 1x 2-component adhesive (Epoxy) Video: https://www.youtube.com/watch?v=PORMB1qgojM Print…
F1-inspired steering wheel Easy installation just unscrew the old steering wheel by unscrewing the 6 central screws then screw on the printed attachment . The attachments are screwed together using m4x25 screws and nuts Inspired by…
you can use hp power supply ,see the pictures please .
Housing is fitted to the shape of the original dashboard. Designed to attach the bottom part with original hex screws. 7-segment display can be mounted with two small screws (2mm thread diameter). Top part can be fixed with 4 small screws…
Halter mit großen Standfuß für mini Router von GL iNet. Wurde entworfen für den Einsatz mit einem LTE Stick.
⚠ Note: Thingiverse Customizer seems to have currently issues with generating customized models.Alternatively just download the scad-file and run it yourself on your local machine. When doing so make sure to also download the segment STL…
Blank router table insert for the Ryobi BT3000. Can be used to block off the opening or modified / cut for router use. You may need to scale just a bit for the desired fit.
Replacement end caps for the Ryobi BT3000 table saw. This should not require supports if printed on the 45 face as shown / downloaded. Note that the left and right caps are mirrors of each other so if you only need one, make sure you…
Steering wheel based on Ferrari 488 GT3 design GitHub Repository: https://github.com/Alby312/GT3-488-Wheel Wheel of 30cm of diameter, based on real wheel of Ferrari 488 GT3 with 12 push button 2 rotary encoder and 2 magnetic paddle shift.…
v2 of the mount, very easy and fast to install with 8 large zip ties and 4 pcs M6 x25 screws the Logitech G29 pedal to Playseat challenge seat Also working with Thrustmaster t300 RS Print instructions PETG, print 2 times the G code or 4…
This mod consists of 2 prints one for the internal hinge that normally brakes, making the shifts even more spongy and another to attach 2 magnets to make the gear changes stiffer and quicker (maybe). You will need the following hardware…
Is your USB cable on your thrustmaster T300 or TX steering wheel broken, or is it starting to break? This thing is just for you. This mod gives you the option to use a standard USB-A to B cable for connecting your steering wheel to your…
Remixed version of magnetic paddle mod, i changed 12x5mm magnets to 12x3mm, because i found out 12x5 was a little to strong To mount paddle mod I used 3M VHB tape To mount magnets you may need to use vice or heat up part - but it depense…
You need 4 x 12mm m4 screws, the original ones are not long enough. Sand the surface with very fine grain paper.
Print in stiff material like PLA or PC with wall thickness 4. Feel free to modify to your needs with FreeCAD
I had the issue that I could not mount the T300 wheel far enough away from me. The reason for this is the “lip” on the front of the wheel that only allows one mounting position on the playseat challange. I designed this simple spacer that…
This is Bass Shaker bracket for Thrustmaster T300 RS Pedals. BoM: 2x clips (L & R) 1x frame 1x Bass Shaker (Dayton Audio TT25 Puck Tactile Transducer) 4x M3x30 4x M3x20 6X M3 nut 2x self-locking M3 nut Bracket also fits to clone of DA…
Cricut adapter for papermate RT300 Inkjoy pens. Remove rubber grip to insert oen in adapter
Summary A phone holder for the Thrustmaster T300 (RS) wheel. Currently fitting my iPhone 12 very well, but similar phones might also work. Very nice in combination with the Simhub Dash to show some metrics during sim racing. Printing…
