Comgrow T300 or T500 PTFE Filament Feed Adapter (ECAS04)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Low-friction PTFE tube adapter for Comgrow T300/T500. Uses ECAS04 connectors. Great for MMU filament feeding.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Comgrow T300/T500 PTFE Tube Filament Feed Adapter
Adapter for the Comgrow T300 or T500 that routes filament to the toolhead via a PTFE tube. Designed to work with ECAS04 push-fit connectors (without the black rubber gasket).
Note: The fit is intentionally tight — you may need a hammer or vice grips to press the ECAS04 into place.
Compared to the original, this version is significantly lighter and has reduced friction, making it better suited for filament feeding through an MMU.
It is very small so 2 walls and 20-50% gyroid infill seems to work fine for strength. PLA works without any warping since the top of the toolhead doesn't get that hot.