Liczymy pasujące modele…
Credits: All credit goes to SilencedFrost , who has provided incredible add-ons for Neptune 4 printers. I just took this incredibel work and adapted it to my preferences. This custom mount integrates the optical filament runout sensor by…
KKM feeder with Filament Runout Sensor and ECAS04 fitting Just split, orient and arrange kkm-frs-for-print.stp To find out what new parts are needed, look at the full model in kkm-frs-with-components.stp Made for gears with a 4 mm bearing…
Comgrow T300/T500 PTFE Tube Filament Feed Adapter Adapter for the Comgrow T300 or T500 that routes filament to the toolhead via a PTFE tube. Designed to work with ECAS04 push-fit connectors (without the black rubber gasket). Note: The fit…
Remix of the ECAS04 by @3DCoded’s cutout model creates a flat surface on top. This reduces the overhang angle, and creates a flat top surface that bridging should print without any issues.
Printed at 0.2mm layer height, 5% infill, no supports
This is a replacement for the front frame part. It's a remix for Bowden ECAS04
Made with inspiration of https://www.printables.com/model/562384-voron-mini-stealthburner-ercf-filament-sensor , tuned the design for a better fit (original one didn't work)
My previous design of a standalone sensor for the sherpa mini had 2 small issues, too thin and would sometimes break, and added too much height, so I finally went and modified the body of the sherpa. BOM: 1 - 4mm ball bearing 1 - D2F…
This remix allows you to fit the LIBRA extruder with a ECAS04 Bowden connector.
Replaces the stock bowden tube holder on the eBox with an ECAS04 fitting. Now it connects a 4mm outer diameter bowden tube without it slipping out easily. Printing Print the part on its flat side lying down. Inside the slit supports are…
This is a simple 4-way Y splitter designed for use with the 3MS Modular Multimaterial System . This splitter design uses 5x ECAS04 fittings and is intended to be printed at a 0.2mm layer height with PLA or ABS/ASA (PETG is too soft).…
Please, don't forget to like! 🙇 This is a straightforward design that enables the connection of a PTFE tube via a ECAS04 connector to the Eibos Easdry and may also fit other dryers with identical openings.
This is a simple and easy to print (no supports needed) ECAS04 bulkhead fitting/filament guide. I am using the Gunpla filament dry box and i didn't have any of the fitting that were needed for the filament pass through, however i had a…
I like the look of skeletonised front plate but it has no connector so I remixes it to allow the use of ECAS04 connector (silicone seal removed).
I'm currently working on my Voron Trident build, I wanted to take the opportunity and design something of my own for it. I decided to make a customized version of the LGX-Lite tool head that includes the Filametrix filament cutter and an…
ECAS04 filament guide for IKEA Platsa cabinet which uses original holes of the cabinet on top and bottom corners.
Mount is for “ECAS04 Bowden/PTFE Tube Coupler” by @jphalip Allows for the coupler to be placed anywhere on a Creality K1 using existing screws, holding the coupler in a single spot! (M3) Link to the Part Below!…
Remix of the original model to add a cap for covering the connector when not in use. This is especially useful when using this connector with dry boxes. I also provide the Fusion360 source files for connector + cap.
ECAS04 filament inlet for Voron V0.2 (0 V0 0.2) dual purpose: bowden and bare filament Works well with ERCF ecosystem as well as with standard back spool holder. No need to readjust the pressed-in bowden tube each time you press it in. 1…
Added ECAS04 fitting at the top of the Voron 0.1 Mini Afterburner to allow using filament ramming for BoxTurtle AMS (https://www.armoredturtle.xyz/docs/afc-klipper-add-on/installation/buffer-ram-sensor.html). This prevents the reverse…
Drybox filament guide fixture with inside and outside parts, remixed for ECAS04. I don't have any PC04-M10 connectors, but I do have a giant bag of ECAS04. So I scaled the original PTFE Guide parts down and recreated the holes for M3…
This model replaces the existing filament sensor housing of the Neptune 3 series filament sensor to support ECAS04 couplings. This my new preferred variant, and borrows a lot from my other remix for PC4-M6 Printing information: Print 0.12…
Recommended to print on its side due to weakness between layers when printed upright. 0.12-0.16mm layer height recommended. Recommended materials are: ABS, ASA, PA, PET (and respective GF/CF variants). PETG might also still work. When the…
This is two simple models: ECAS04 press-fit bowden fitting STEP model for CAD Cutout for ECAS04. This is meant to be used as a negative volume and your final part should be printed horizontally , not vertically, with respect to the hole.
Thanks to ramservices for the original design. I have redesigned for metric hardware and a better passthrough of filament. Thanks to ramservices for the original design, I have redesigned for metric hardware and a better passthrough of…
passthrough meant for a 15mm shelf (make a tpu o-ring snug and to not scratch shelf)
Credits: All credit goes to SilencedFrost , who has provided incredible add-ons for Neptune 4 printers. I just took this incredibel work and adapted it to my preferences. This custom mount integrates the optical filament runout sensor by…
Zip tie goes above the gears. You will probably want to use the other one I have, its this but remixed with a filament sensor
Taking advantage of the magnificent work of @Ross130_1692583, I have modified the main body to make it compatible with version ECAS04. The only modification is to the main body and the slider. The rest of the files can be downloaded from…
remix of great tiny filament sensor, for mounting on that cheap generic extruder. Somebody better than me please remix this to not mount with zip ties. 1x ECAS04 1x Microswitch without bar 1x 5mm ball bearing I carved the hole for the…
Quick mod of the official sherpa micro model that allows you to add ECAS04 fitting to it. Uses release 2 rev 1 version of sherpa micro model. You need to remove the bottom rubber and plastic pieces of the ECAS-04 fitting beforehand.
Making another buffer but didn't have any of the collets that came with the original MMU3 kit but had plenty of ECAS04 connectors. Made the collet hole larger to accommodate the ECAS04 connector. I used these ECAS04 connectors: Amazon.com…
The only ECAS04 connector adapter I could find was https://www.printables.com/model/1225112-creality-space-pi-ecas04-fiting , which didn't have anything to secure the plate in place. So I decided to make one myself. Printed in eSun PC-HT…
KKM feeder with Filament Runout Sensor and ECAS04 fitting Just split, orient and arrange kkm-frs-for-print.stp To find out what new parts are needed, look at the full model in kkm-frs-with-components.stp Made for gears with a 4 mm bearing…
Comgrow T300/T500 PTFE Tube Filament Feed Adapter Adapter for the Comgrow T300 or T500 that routes filament to the toolhead via a PTFE tube. Designed to work with ECAS04 push-fit connectors (without the black rubber gasket). Note: The fit…
Remix of the ECAS04 by @3DCoded’s cutout model creates a flat surface on top. This reduces the overhang angle, and creates a flat top surface that bridging should print without any issues.
Printed at 0.2mm layer height, 5% infill, no supports
This is a replacement for the front frame part. It's a remix for Bowden ECAS04
When replacing the hotend on my daughter's Prusa Mini+, we cut the tube too short. Instead of waiting for a new tube to arrive, I quick modified the extruder to take the press in ECAS fittings I had left over from some Voron shenanigans.…
I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store Check out my other AD5X replacement parts,…
[EN] New PTFE front/rear holder using ECAS04 connectors for the mod MMU2+1s 10/7 colors: use of ECAS04 PTFE connectors ( https://s.click.aliexpress.com/e/_v0glA2 ) improved filament path reduces PTFE angle for less movement stress…
Bowden ECAS04 adapter with an actual width of 9.15 mm. The adapters I bought did not fit into any of the exported files, as the clearances were too small and the printed object cracked apart. I recreated the object and the ECAS04 adapter…
Wanted to make an adapter to work with the included parts, this can be installed on your already assembled INDX. This thing attaches to your filament sensor assembly and allows you to connect PC4-M10 passthrough fittings, or another model…
Y-Adapter for Qidi Box Q2 Hub (for ECAS04 Fitting) Version V1 by @StarCom Lab Description This mod is designed to solve the problem of unreliable PTFE tube retention in the stock 4-channel hub. The standard solution does not provide…
This tool will help you easily keep everything inline while pressing together. Simply insert the body of the coupler into the tool, add the plastic gland, and align with the press. With a clamp, vise, or large pliers you should now be…
This is light weight version of the ECAS04 holder for ryper MMU2+1S 10. In the original holder the ECAS04 didn't snap in at all for me. With this design the ECAS04 snap in quite some force and stay put. You can also remove same by…
Designed this bracket for my Voron 2.4 holding the reliable TriangleLabs RunOut-Sensor. Instead of using Festo-type Ø4mm nipples I designed the bracket for ECAS04 nipples. Those are far better PTFE tube putting in and out without longterm…
I Remixed the Y-Splitter to use the Bowden Collets leftover from my ERCF build. I Printed this one on my Voron 2.4 (Still Waiting on the X-1) in KVP ABS with the single end on the build surface. I did use painted support on the interior…
This part can hold an ECAS04 fitting to attach a bowden tube to a dry box. The provided STLs have an angle of 0º and 45º. You can customize the angle and other dimensions by modifying provided Fusion 360 file (Look for the model's…
This is a bowden/PTFE tube coupler that fits an ECAS04 on each end. I've printed mine with PETG, but it should also work fine with other filaments like PLA, ABS or even TPU. I'd recommend cutting a chamfer inside each bowden/PTFE tubes…
I designed this piece because the original fitting stopped the discharge of the filament, it also happened to me with the Y-Splitters. Quick plug fittings bite the ptfe and degrade it quickly. With the ECAS04 this does not happen, I…
Print-in-Place magnetic Filament Cleaner using an ECAS04 coupling for printing in places with lots of dust. BOM 2x 6x3mm magnet 1x ECAS04 bowden coupling Any questions? @NyxCode#1137 on the Voron Discord
I created this model (in openscad) from scratch to allow for self-aligning, simple, quick-release bowden tube connectors. It takes three 6x3mm magnets and an ECAS04 collet on each side; the position of the magnets aligns the tubes…
This is a sensor cover for the Bondtech extruder upgrade for the Prusa MK3S / MK3S+ for reverse bowden using a collet clip . It's a remix of the original sensor cover by Bondtech. Supported PTFE Collet Clips Name Printed Part Sourcing UM2…
The PTFE coupler uses two ECAS04 connectors to extend the tubing. The arrows on the model point the direction of flow of filament.
this is the version of the plate before the recent update. Made for using without a toolhead sensor: https://github.com/EtteGit/EnragedRabbitProject/tree/no_toolhead_sensor
added a pc4-m6 connector and ECAS04
I've modified the original MMU3 chimney base for using it with an ECAS04 instead of a M5 adapter. It works really well.
BOM 2 pcs of M3x8 SHCS 1 pcs of ECAS04 fitting (You won’t need the black rubber part on the bottom)
I remixed the Front Plate from Dragi2K for ECAS04 Insert Adapter instead of the PC4 M10 for the PTFE tube. Has fewer leverage and looks much better. It fit for me perfectly. You have to press it in with a little force. There is no play…
Formbot sensor-filament outside bracket *Update 02/02/2025 PC4-M10 added Hello, Recently my sensor housing broke for some unknown reason, possibly hitting a part of the printer. So and as I had been thinking about it for a while, I made a…
Moved the notch for the ECAS04 to the center of the part. Use standard Voron print settings.
I wanted to be able to use the ZeroClick with my Voron 0.2 but also wanted a filament sensor in the toolhead for eventual integration with a MMU setup like the ERCF. The offset version of the mount is featured in the photos, because I…
