ECAS04 adapters for Flashforge AD5X IFS tubing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PC4-M10 adapters are bulky. The stock clamps are really annoying if you want to remove the tube. Here's the answer.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 113
- Wydruki
- 3
- Wyświetlenia
- 601
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store
Check out my other AD5X replacement parts, mods and upgrades (all free!).
I liked the idea of the PC4-M10 adapters for the IFS, but I wanted something a bit more compact. Here's the result.
This should be fine to print in pretty much any rigid material you like. I used ABS. Some users have reported needing to slightly scale up the model (102% or so) when using PETG.
This model should be printed with all layer heights, including the first layer, set to 0.2mm; and oriented as in the STL file. This is due to some geometry tricks used in one spot to avoid the need for supports. External brim can be used if desired.
There are two versions, corresponding to two slightly different ECAS04 fittings that I've come across. The obvious difference between the two is that one is plastic, and one is metal; therefore, I've labelled them as such. In case you want to ensure you have the same ones I did:
Plastic: https://www.aliexpress.com/item/1005005834412661.html
Metal: https://www.aliexpress.com/item/1005009067215441.html
Requires one ECAS04 fitting per adapter. I strongly recommend using a flat object to push them in rather than trying to do so by hand. Do not remove the rubber.
Remove your existing tube clamp, install this in its place, insert tube. Make sure to push all the way in.