Liczymy pasujące modele…
UPDATE: Updated the text on the model. Still working on a newer version and a non gridfinity version. Just don't have the time to finish them. I saw Flashforge had .25, .4, .6, and .8 nozzles for sell on Aliexpress, so I decided to make a…
Spool holder for the Flashforge AD5X inspired by the great "Filler" spool holder. I was originally going to just modify the filler, but found that there were no .step files for the parts I needed to modify, so I just started from scratch.…
Flashforge AD5X Spool Number Plates, shaped to the spool spindle ends. Useful to show spool number which is hidden if the spool is installed Just clips in to existing spindle hex hole at the end. Remove number support after printing with…
I used the original part for 2 months, but now I need more space behind my printer. So I created these two versions based on the original design. Changes: - Thinner walls (1 mm and 1.5 mm versions instead of 2) - Simplified geometry -…
Just the four nozzle storage bin based n Gridfinity system with the addition of the space for the heat sink in the new nozzles. Not stackable as the original (no lip), 2 x 2.
Box s úchytom na odpad filamentu pre 3D tlačiareň FLASHFORGE AD5X
ENG - A basket and slide to capture the excrement of Flashforge 3D printer filaments. It is quite narrow and equipped with a removable basket, so the printer can be moved against a wall. The slide has been designed with grills to remove…
NOTE: This design is a tight fit on purpose - You may need to de-burr or sand down the inner edges of the circle to get the sensor to fit (purely because it needs to be a tight fit due to vibrations etc) A Vent cover for the AD5X/AD5M I…
This print is designed for TPU. If printed in a rigid filament, this will likely only cause issues. An expedient strain relief/ cable erector to keep the AD5X Print head cable from getting caught behind the print head with the IFS moved…
Simple adapter to snugly fit into JAYO PLA spools and then slide onto AD5X spool holder. Takes JAYO spool with 73mm diameter opening and steps it down to 54mm. Fits onto AD5X very snugly, so I recommend leaving adapter on the spool holder…
Designed for tools supplied with the printer and https://www.printables.com/model/1425722 I added space for tweezers and free space for glue or lubricant. I printed from TPU with the bottom side up, without supports – I wanted to try…
AD5X Spool Adapters Fits spools from 72mm to 75mm diameter - .5mm increments Prints in under 30 minutes
Simple design for Flashforge AD5X Spool holders, adding numbers to them to avoid confusion while loading filament. Just push the number to correct position and remember the rod has a hexagon shape, so you might need to rotate the number…
Noticed that whenever you print the enclosure your alway left with the bottom part below the door being black and not matching the rest….. So I gave quickly designed a bottom trim to go over it, I did recess some holes into it for magnets…
UPDATE: 02.19.2026 This has been revised to correct the issue preventing the plexiglass from sitting flush to the bottom of the printer. Remix of AD5X 's A1 and B1 enclosure parts. This remix adds slots to both parts to hold 3 bed plates
I know you all wanted this. Here is the Flashforge print nozzle storage box with the finger grabs AND the Flashforge logo on top of the lid. The “F” of the diamond logo is separate so you can infill it with the FlashForge blue if you…
This is a simple solution for a common issue where spools have too large of in inner diameter for printers that use AMS/IFS. i mad this specifically for the Flashforge AD5X printer, but it may work for others. I used PLA basic with a .4mm…
I made a edit to the standard frame piece that holds the control panel to add a name plate. The nameplate consists of the back place, a ring, and the 4 letters of the printer name. Bringing in the 6 elements together into the slicer as a…
Holder for a cheap LED Strip on Amazon for Flashforge AD5X/AD5M. Link to the strip: https://www.amazon.com/dp/B0F5G5TFC2 The model remixed previous design with additional details: Add a hole at the end of the holder to clear the…
I wanted a base for my AD5X that would route the power switch to the front of the printer and add storage for tools. I wanted a lip around the corners of the printer to help ensure the printer did not wobble off, but I wanted to retain…
To aviod having the strip adjust the insert slot to 0.5- you will need an 0.2 nozzel It wpuld not print the slot using 0.4. Category: 3D Printing
As the filament is loading and unloading this cause the PTFE tubing to move and add a ever so slight pull upwards on the ring inside the fitting, this causes it to get stuck on to the tubing, making the standard method of removing the…
I found many bin attachments online, some that curve around the machine and others that are free standing. What I wanted was a permanently mounted stand with a bin that sits securely in place, stays close to the machine to save space and…
Right-Side Cable Management for FlashForge AD5X This cable management clip is designed to run along the right-side horizontal support of the FlashForge AD5X , helping to keep cables tidy, controlled, and safely routed during printing. I…
Had a spare BIQU Panda Revo and decided to put it to good use. This mod is only tested with it, but should also work with most of Bambu P1/X1 style hotends. The heater uses 10-12 more watts, but it worked for us. Usual warnings: we are…
The dry box for your Flashforge AD5X can be downloaded from here: https://wiki.flashforge.com/en/ad5x/dry_boxes This is the o-ring mentioned in the installation guide, but the kit isn't available at the moment. Printed from TPU it's a…
Moved pass through more inline with outlets. Angled 45 to give better flow to my taste. I'm very new to designing stuff so not perfect but works fine for me
I could not find a simple tool holder with vertical storage for nozzles, so I remixed StarscreamUK1312's tool holder with the following changes: Added nipper cap for nipper storage and moved it off the face of the tool holder Pushed the…
Side sections for base This is a star wars empire version of my wryland design which is linked with this model. Tray design included
Star Wars R2D2 Themed AD5X Base with two trays Also included two plain draws if you do not want the designs
Camera mount for FlashForge AD5X This mount is made to be used with two original screws that you remove when assembling your printer. See photos for mounting placement. The mount was originally designed around the Wyze Cam 4 but, the base…
T.E.A.M FLASHFORGE, basically a tag to show how much you love flashforge because i do
I was having trouble leveling the platform. I had to develop a platform leveling device. 1. How does it work? Position the printed platforms as shown in the photo. 2. Loosen the belt. 3. Turn the Z-axis screws until the brackets touch the…
This is a small wire clip to hold the wire for the LED light that will sit in the channel on a FF AD5X
This is a modified version for the very common light bar used on Flashforge AD5M and AD5X printers. Includes a secondary cut-out so that desoldering will not be necessary. Also lengthened the ends to allow the 230mm long light bar to fit.…
Alternative Dry Box Plug (Easy-Print PLA Design) This plug is designed for the FlashForge dry box as a simpler, more print-friendly alternative to the original TPU plug . The geometry has been intentionally simplified to reduce overhangs…
Dry Box Outlet Alternative This outlet is designed as a PLA replacement for the original TPU plug used in the FlashForge AD5X dry box . While the stock outlet is intended to be printed in flexible TPU, this version uses simplified…
I wanted to give my enclosure a clean look, so I made these up to fit into the recessed AD5X logo on the printer's enclosure. These fit nicely, and only stick out a little as they are only 1mm thick. Just print, apply a tiny amount of…
I couldn't find a version with the holes positioned toward the top, so I made up this version. It has a 2mm thick wall to help keep heat and fumes inside. By moving the four holes toward the upper edge of the opening, the PTFE tubes sit…
a quick and easy 1 hour print that keeps the lid from moving on the AD5X enclosure kit. Uses the holes from the kit that attach the top band to the top uprights for stabilization.
Update: Created V2 that supports smaller diameter spool openings. I found that I was getting some that slightly smaller then 53mm and were just too tight to fit. I split the shaft into 2 pieces to all me to adjust the diameter easier.…
Модель каретки FF AD5X для нагревателя Bambulab A1/a1 mini. Две версии - с цельным основанием и облегченная. Используемые вплавляемые гайки: М3х4х4.5 - 7 шт. (крепление фидера и нагревателя) М3х5х4.5 - 4 шт. (крепление каретки к принтеру)…
I used Mark Litchfield's poop chute design and designed a holder for the small bin so that it will always sit in the same exact position after every dump. It uses the screws that are already by the side of the frame. No support needed I…
I printed the slide standing up with tree supports on build plate only. So the bottom where filament fall through will be on the build plate and the tree supports will be supporting only the parts where the screws go through. 2. The…
⚠ Important There are different versions of this cover. I've managed to identify three variants so far. If you have information about others — please share detailed photos and measurements. You can also remix this cover using the STEP and…
I wanted a solid piece to fill the empty vent covers to help keep heat & fumes in, but also wanted somewhere to place a temperature & moisture sensor, so I figured this will do the trick. I made the hole 41.5mm, which fits my AliExpress…
Description: Everything I printed on my AD5M Pro, using a 0.4mm nozzle. The riser was made with PETG, just to match the enclosure, but can easily be made with PLA. The 3mf file is set up for my AD5M Pro, with eSun PETG-HS. The chute was…
I liked the original design with the exception of the round ends because they kept hitting my enclosure glass so I modeled a new retainer without the rounded ends.
provides filtration and pid control of fan to prevent overheating when printing pla added a 3mf file for the enclosure panel this is printable on ad5x will print and post. items to make it work links: fan: https://a.co/d/0jesMyef filters:…
There are spots for a bed scraper, bed glue, ipa spray bottle, screen stylus, and 3 extruder nozzles. I found it best to print this with standard grid supports with a 3 layer top interface. The bed scraper slot is designed to fit this bed…
🔧 IFS Bracket – Flashforge Adventurer 5X / AD5X A simple mounting bracket for relocating the IFS (Intelligent Filament Sensor) on your AD5X. This model is designed primarily for modders who want to move the IFS to a different location —…
A mount has been made for Bambu TZ hotend and nozzle users <3
For those who like to keep there filament in dry boxes while printing. Here are some markers made to fit the front angle of the Creality Space Pi Filament Dryer.
AD5X/AD5M Vent Cover With Cutout to suit 41mm Temp/Moisture Sensor off Aliexpress
⚠ Please note: So far, I haven't had time to print and test this model myself. If you run into any issues — please leave feedback so I can improve it. 🧾 Disclaimer Before working with any electrical components, make sure you fully…
I love the idea of Carlos Guerrera's plate holder mod of the original A1 and B1 sections of the AD5X enclosure files. When installing the revised sections with the enclosure panels, the plate holders prevent the side plexiglass from…
Use in conjunction with Internal Circulation mod: https://www.printables.com/model/1473971-ad5x-internal-circulation-air-filtration-duct-with And additionally I made it for use with the Hygrometer/Temp cover with holes:…
The AD5X partition, passing through a through-wall made of PTFE with a 45-degree rotation. Displacement of the tubes in the middle of the part. added a sleeve inside the case/ PC4-M10 pneumatic fittings are used print vertical thread
This is a 3d model of the frame and the enclosure put together in fusion360. The only thing I did was assembled the meshes together and put it on the ad5x frame. To better help people make changes or design what they want. Since there was…
I created my own model for the waste. The sloping surface allows waste not to accumulate in one place.
Brush Cable Grommet for AD5X Flexible brush-style cable entry for heated bed wiring — clean, durable, and easy to install. This model is designed to guide heated bed cables through the printer enclosure panel. It helps prevent cable…
This is a webcam holder designed for the Flashforge AD5X 3D printer. It is primarily made for the Logitech C270 , but can also be adapted for other similar webcams. The mount can be used together with the original Logitech C270 mounting…
These are the files to upgrade the A4 and D4 top pieces on the AD5X enclosure. With these files you can add three PWM controllers and a humidity temperature gauge which I'll also leave links for. You will also need wiring, and I used some…
v.1.02 cover (lid) parts changed Standard glass set for the AD5X used. The main printing material is PETG (approx. 895g). Before printing, adjust the flow rate for your filament. !!! Пластик сушим сутки при 60°C, даже новый, иначе, с 99%…
façade pour imprimante Flashforge AD5X avec bouton ON-OFF déporté
73mm filament spool adaptor for Flashforge AD5X printers. Based on ELEGOO spool 73mm diameter and 61mm depth.
Generic Amazon LED Strip Mount for AD5X The amazon LED does not fit the OEM mount.... I've modified the original to fit the amazon LED. vvvv******IMPORTANT********vvv ***You will have to cut off one of the male plug connectors from the…
Отлично. Осталось всё собрать по простейшей инструкции в картинках. Для стилизации вашего футляра понадобится ПЭТ лист толщиной 0,3 мм, космофен-клей и ножницы. Нарезаем "3 полоски") 1 полоса 19,5 х 75 мм 2-я и 3-я полосы 14 х 33 мм…
I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store Check out my other AD5X replacement parts,…
This is a mounting bracket designed to fit the base of the Flashforge Adventurer AD5X (5M/Pro) . The primary goal of this model is to provide a mounting point for status indication (when using addressable LED strips like WS2812B/COB) or…
Silica basket, designed to snap on the outside of the IFS module on the Flashforge AD5X. Printed with a 0.40mm nozzle on the AD5X in Flashforge PETG-CF, 0.20mm layer height, with tree supports. I recommend using PETG or PETG-CF, as the…
This is a simple, functional remix of the Flashforge AD5X/5M LED mount designed for those who prefer a magnetic attachment over permanent tape or screws. Key Details: Magnet Size: Designed for 6x3mm neodymium magnets. Fitment: The holes…
I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store Check out my other AD5X replacement parts,…
UDPDATE ADD VER Engine Bracket AXIS V2.1 Engine Bracket AXIS V1 Model The X bracket differs from the original one. It does not hang in the air. The length of the guides has been increased ----What do you need----- 1.Insert nut M3*4*4.5…
Экономит пластик и время, толщина стенки 0,8мм, прочности нет. Данная модель изменена, взята с сайта другого человека и переработана с целью уменьшения веса и времени печати. Если вам нужна данная модель на века, то лучше скачать…
A Flashforge AD5X poop chute basket that's compatable with the left handed poop chute designed by Mark Litchfield here .
This dial gauge holder fits beautifuly ontp the extruder guide raills and quite impressivly doesnt allow it any wiggle room at any point. i knocked this up in ONSHAPE as basic functional and very easily printable.. 0.4 nozzel used /0,2…
Vent cover for AD5M/AD5X with integrated slot for temperature/humidity sensors. Also available without the hole for the sensor. Link to the sensor I used: https://www.amazon.com/dp/B0DXCSXT9X?th=1
Sealed cap PTFE tubes for Flashforge AD5X Screw - M2.3x6 - 4 pieces
This adapter allows you to use the spool holders from the Flashforge AD5X printer. They are approx. $15 and allows your spool to have a nice snug fit. This adapter simply replaces your original spool holder. Put in the adapter and slide…
Модель каретки FF AD5X для нагревателя Bambulab P1/X1. Из-за того, что положение корзины сброса отходов и её шторки может быть разным у каждого конкретного экземпляра AD5X, в проекте несколько версий, различающихся положением хотенда по…
Ad5X enclosure remix modeled on the most excellent enclosure by HJCP69
Fix for Small Spools Not Fitting on the FlashForge AD5X This adapter is designed to solve a common issue with the FlashForge AD5X: many 43mm inner diameter spools don’t fit properly on the factory spool holder. This model allows smaller…
this is an idea i had after printing my enclosure. not sure if it will work or not but if things go wrong in the future i plan on giving this one a shot.
Honeycomb-style vent cover for AD5M / AD5X designed to improve airflow while maintaining structure. Also available with a hole for a hygrometer / temperature sensor.
FlashForge AD5X DIY Enclosure Lid Riser A simple 4-piece corner riser set designed to slightly elevate the lid on a DIY enclosure for the FlashForge AD5X for passive ventilation during prints without fully opening the lid.
Simple adapter to install Bambu Lab A1 / H2 hotends on Flashforge Adventurer 5X. Prevents bambu hotend from moving vertically. V2 - hole optimized How-to Print adapter for your bambu hotend. Use PETG/ABS/PA/PC etc.; Remove stock AD5X…
Add this tidy facia trim to your AD5X. It still allows access to your USB port on the right and carry a round stylus pen on the left.
Add a bit of style to your display screen with this switch surround. This still allows access to the USB port on the right. The kids / grandkids will love it. 3 plates Total print time - 1hr 31m Total filament - 44.38 g 0.2 Layer , 2…
I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store Check out my other AD5X replacement parts,…
