AD5X Lid hinge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hinge with 135-degree stop and 30-degree stop. Designed for new AD5X enclosure. In-place printing.
- Ocena
- 4 / 5
- Polubienia
- 227
- Pobrania
- 878
- Wydruki
- 2
- Wyświetlenia
- 3928
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I didn't like the loose lid, so I made hinges with a stopper and a ventilation stopper for PLA printing. Printed in one piece.
You need two pieces, one of which needs to be mirrored.
I use 4mm thick plexiglass for the top cover, I don't know if it will work for the original cover. Therefore, a hinge for 3mm plexiglass is also available, but I don't know if it will fit.
I printed from PLA in a vertical position with organic supports with a layer of 0.16 mm. Each hinge is attached to parts B4 and C4 using 3 pieces of 3 mm inserts.
I am also attaching parts B4 and C4 (new higher version) with holes for inserts.