AD5X Lid hinge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hinge with 135-degree stop and 30-degree stop. Designed for new AD5X enclosure. In-place printing.
- Rating
- 4 / 5
- Likes
- 227
- Downloads
- 878
- Makes
- 2
- Views
- 3,928
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I didn't like the loose lid, so I made hinges with a stopper and a ventilation stopper for PLA printing. Printed in one piece.
You need two pieces, one of which needs to be mirrored.
I use 4mm thick plexiglass for the top cover, I don't know if it will work for the original cover. Therefore, a hinge for 3mm plexiglass is also available, but I don't know if it will fit.
I printed from PLA in a vertical position with organic supports with a layer of 0.16 mm. Each hinge is attached to parts B4 and C4 using 3 pieces of 3 mm inserts.
I am also attaching parts B4 and C4 (new higher version) with holes for inserts.