Counting matching models…
If you enjoy this model, take a look at the new F23 Glider: https://www.printables.com/model/456057-f23-ultralight-glider-print-in-place or a glider starship:…
I made this lid because I lost the stock one, this one is made out of TPU so it is flexible and works just like the stock one or even better, because TPU is stronger.
Hi, I made a universal glas/can lid. The lid snaps into place for almost every glass. If your glass doesn't click into place, the lid still offers protection from insects, dirt and dust. Because of the key ring, you can simply hang the…
One of these bowls will hold the 180 stones of one color for your go game. Nothing pretty, but they get the job done. Screw lid for storage. If you are using the OpenSCAD file, please see this note from der_da : The file is using the…
A simple tool for field assembly of all RC models that take nylon M6 screws to hold its parts together. Designed for my Multiplex Lentus for attaching horizontal stabilizer. Small size makes it ideal to leave in transmitter case to have…
I always wanted to take my favorite knife with me to picnics or the pool. So I designed a fully customizable box for this knife held together with small magnets. The box is fully customizable (see pictures) in Fusion 360 where it was…
This riser is mounted and assembled using M3 screws making it rigid and reliable. Also, it is easy to print with high quality. You will need: M3x30 - 4 M3x5 screws - 8 M3x4.5x3 heat inserts - 8 Vents are not needed (but can be added) if…
Standard sized can lid printed in TPU filament. The size is for a standard 75mm (3-inch) can; however, the x, y, and z axis dimensions can be changed in the slicer to accommodate any size can. The edge of the lid is angled so as to form a…
In order to print PLA, you need to vent the chamber. I designed a quick and simple lid prop. I would print this and in at least PETG, likely higher temp filament like ASA or ABS. No supports, no hassle, quick print.
Xbox series S minimal slide in wall dock. Designed in a way which use xbox bottom and back rubber pads to eliminate vibrations and add stability. Console can be removed without unscrewing anything and put back in same way. Parts included…
I've been using this filter for ages now, and completely forgot to upload the remix I realy like The Filter, but not the lid, as it's a PITA to keep in place as is. So I added locations for 2 threaded inserts and corresponding holes in…
i had the problem of dust collecting in the slot of the slider, so after some time i could not close it anymore. so i made another slider with the 50mm hole and i cut of the pins of the original slider. now instead of opening and closing…
Great organizers for flamecraft designed by @olivvybee. As I need to take game sometimes to other sessions, so decided to make a lids to keep components in place. Organizers has NOT been changed, only added lids. No lid for cards storage…
Lid holder design for replacement for the broken part. It can be assembled with screw. I used it for lid from Ernesto
Cardboard shipping tube lid Models: Simple lids for closing cardboard transport tubes. The lids are available in two sizes, for rolls with an inner diameter of 40mm and 99mm. The size can be adjusted with scaling in the slicer. For…
Large desiccant container I created several years ago which has increased surface area for large spool boxes. Posted as requested. I will post an actual picture of it in use later. Box and lid are on the same stl, just ungroup them. Print…
I've remixed the Lid by Hsus. I just reduced the hight by 5mm but kept all other dimensions (diameters) the same. This fits my Chemex perfectly. The initial one was a bit wobly…
Enhance your Rabbit R1 AI Companion experience with this versatile MagSafe-compatible (must add mag ring) charging dock and stand. Designed for both functionality and portability, this dock securely holds the Rabbit R1 while aligning…
Changed the original lid to fit when SD card is inserted.
I made this lid because i dont wanted to have an open jar of cat food around :P Also our cat likes to eat different foods over the day wich often results in 3-4 open cans in our fridge .
Made a little arm to prop up my aquarium lid when doing water changes. I use egg crate diffuser as a lid for my aquarium but it's a hassle to move out of the way because I have plants growing through it. Nice and sturdy. Easy printing…
I needed a small case to carry my earplugs so I designed this box. But it can be used to store all kinds of small items that need protection. It requires 2 cylindrical magnets with a diameter of 3mm and a height of 2mm. It is a print in…
My wife bought a set of vintage Henkel Hermeverre jars at a yard sale, and one of them was missing its plastic lid.
I created a custom mini trash can with swing lid to attach the swing lid i use 2mm steel nails printed in PETG and PLA with no problems supports only for the lid. printed it vertical like in the 3mf file
Slightly tweaked mount for the BTT Eddy to use the LIDAR USB header on the tool head of the Creality K1 series
Durable and easy-to-print sliders designed to fit 30 x 30 mm aluminum extrusions. Perfect for smooth, adjustable movement in DIY projects or custom setups. Print with supports, ensuring a quick and hassle-free build for makers of all…
PRINTED SOLID Sends spools with carboard instead of plastic! They do not like to roll if you're using hanging oem spool holders from prusa. Quick little hack to get the job done! -print 2 per filament roll -Pla works just fine, print at…
2X2 Gridfinity box - 10 cm high, with a nice and flat lid - Print in place !
This design is inspired by an old gutter clip that is no longer in production, modified to be easier to print. The original upload of this model recommended strategically placed support enforcers. This updated version requires no supports…
They are super easy to clip on and remove from the spring-loaded sliders inside the CFS lid. One is with SUNLU written on the top, other one without text. EDIT: Because of someone commenting 5mm is better than 6mm I added a 5mm version.…
Hi, I made a magnetic fidget slider toy. You can slide quite well with one hand. What do you need extra? Magnets 4x1 mm Super glue I bought the magnets on Amazon: https://amzn.eu/d/193d1o2 Print settings: No support required Infill: 10%…
I recommend downloading the .3mf file as it already has all the settings in it, including the modifier for the logo. Settings: Layer height: 0.2mm (STRUCTURAL) Perimeters: 8 Top Solid layers: 0 Bottom Solid layers: 0 Infill: 15% Fill…
Lid for 425ml can from Bonduelle, can not eat all the corn at once ;-) Just click on. Print instructions Category: Kitchen & Dining Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: No Supports: No Resolution: 0.15mm Infill: 100%…
LID RISER V3 [FRAME EXTENSION KIT] | Vents | LED Strip | Hinges *If you have any issues with printing or assembly, feel free to message me, and I'll do my best to assist you 😉. /////ATTENTION *Because of the seam inside the walls, the…
The boxes for the monsters from Qualith 's great organizer insert were printed a little too tight and damaged the initiative tokens. So I quickly designed an insert as a lid and then labeled it. There is enough space for the initiative…
1:20 - around stables for animals around 10-14cm in height. Actual size 300x220x160 mm for walls, and 330x260 mm for roof. All parts can be done without supports. Major parts done on Prusa XL 0.6 nozzle 0.4 layer, and used layer modifier…
This modular fidget slider uses two magnets and an interchangeable texture plate to create maximum satisfaction. 10 different texture plates are included in the model files. There are 4 printed pieces: The base, the housing, the texture…
Dice tray with numbered spots for dice, a section for rolling and a lid. The lid should be a pressure fit. The center section can be use for rolling dice while playing and storing dice between sessions. No supports needed
Parametric Pot Lid Holder This 3D model is a versatile and practical solution for holding pot lids of various sizes. Designed with customization in mind, it provides a balance of functionality, ease of use, and compatibility with popular…
Pen Slide, an almost horizontal pen/pencil storage shelf that fits under my monitor for keeping pens & pencils etc. organized. Enough slope that the ends are slightly elevated for easier selection. No supports needed. Maintain R/L leg…
A three bay, seven day, slide lid pill organizer with days and times embossed on the lids. The overall box footprint is 202mm x 132mm. Individual storage cells are approximately 25mm x 40mm x 17mm. Slide lids are 2.5mm thick (not…
This model comes with a lid. To secure the lid, one brass M3 insert and one M3x20 screw are required.
Took a very popular model and added a notch to the front to help with taking the lid on and off!
Rear kitchen drawer brackets, marked left and right, with a .25" lip.
My kids wanted a better way to keep score in Nok Hockey and we came up with the idea of adding sliding score tokens to the sides of the board. These have a loose fit that makes sliding easy. The sides are tall enough that the tokens won't…
Water lid for a Nespresso machine. I printed it in PETG, due to what was already on the MK4. I added fuzzy skin to add a textile feeling when removing the lid.
From my video: Print with 0 top layers and 0 bottom layers and adjust the infill pattern and percentage for your desired mesh appearance. I STRONGLY advise against printing it solid since that thing struggles enough for air as it is. The…
This is a stackable 3.5" hard drive tray that allows each drive to slide in and out independently of the others. It is assembled using M3 bolts and 5 mm heat set inserts, and allows for a 120 mm fan to be mounted on either side for…
Install a rangefinder in the SpeedyBee Mario Fold 8 for accurate altitude measurement. The model is designed to mount the TF-Luna lidar longitudinally to the frame, utilizing the existing mounting holes that are spaced 25mm apart. It is…
Kept the back open as I can only imagine the rage kids will get when the car doesn't come out. So this model was made for my under 3 years old son. Who loves to build playtive car tracks. Used the the base to fit for it. No supports nor…
S37x9 - Sakdis Adapter - EasySlide => “ES” oder B66 Skadis-Adapter für Zubehör auf Basis der Lochwände mit 37x9 Raster ( 9x9/37er Raster ) Kompatibel mit: S37x9 oder Garant ( easyfix ) => Umfangreiches Zubehör vorhanden Gleiches Modell…
This is designed to work with the Adventurer riser lid enhancements for gluing purposes. It will allow you to align your parts perfectly for gluing them together. I didn't like the fit of the model so I cut off the tabs and reprinted them…
This is an improved Riser for the FlashForge Adventurer 5M Pro. I made the fit better and removed to tab slots that didn't work for me. The front sides have 2 x 5mm dowel holes and 2 dowels. The rear sides include the 3 rectangular plugs…
UPDATE: 02.02.2022 added Dia Label on Backside added 30mm and 60mm Version DE: Rohrbeschriftung für 30, 40, 50 oder 60mm Durchmesser mit einschiebbaren Label. Befestigung mit zwei Kabelbindern. Größe der Labels: 54x104mm EN: Pipe labeling…
You can print out With any material any layer height and use infill berween 15-30%
This is a model that uses the flexibility of the plastic to fold over and hook to the smaller plate. It will work with 73-87 chevy trucks, and it may work with other makes and models, but I have not tested those.
Remix of https://www.printables.com/model/702716-parametric-box-with-lid by @Billiam
I've used this model since the first few days of having my K1 Max. I had to rearrange my print space in a way that continuing to hang spools off the back of my printer was no longer feasible. However, moving to the side mounts readily…
I cut off the original's curved sides (using the CG modeler Lightwave 2015) so it could be rotated and printed flat, and removed a big chunk from the middle to save plastic and make it print fast. Very little support is needed for this…
I needed a holder to keep my projector slides organized and safe, so I created one on Tinkercad. I printed it in PLA using Inland Wood Rainbow and Inland Light Blue PLA for the label on my Bambulab A1.
Storage for up to 8 wooden trains for BRIO, IKEA with max. size of 45mm x 105mm Requires: 2x Screw M4 x 30mm (better M4 x 40mm) 6x Magnet Ø6mm x 3mm
Over the years both of the plastic screws on my Sector consumer unit (UK) have been badly chewed up so decided to make some new ones. Print these in PLA to test but find print was in CF. Both worked just fine though. STEP file uploaded so…
These are replacement trays for the widely used small parts organizers offered frequently from Aldi (Workzone), Lidl (Parkside) and Allit (Basic 33, VarioPlus Hobby). I maxed out dimensions of the the trays and kept it as simple as…
Gridfinity coin battery holder made for a set of batteries from Lidle, the square space is to hold something like a toothpick or a sim card tool to help you get battery out.
A dock to go with Ratrig toolhead beta2 and the front piece and mount in https://www.printables.com/model/963737-mount-for-euclid-probe-and-a-new-front-for-ratrig. The dock is now thicker, so that the lead screw bearing actually reaches…
To maximize the contention of any eventual fumes I added a foam seal as a gasket in my enclosure (lid after installation had an approximately 5mm tall clearance) This version of the lock is 4mm taller, with an (optional) 3mm washer to…
Organizers of the same size can be stacked on top of each other. Needs supports on the stacking ridge.
I originally made a modified 6 pod section which has integrated mounting tabs but figured a mounting section which attaches to the regular 3 or 6 pod section would be more useful. Uses 4x M5 bolts and nuts to mount.
This works best when Zip-tied to the slider. You can glue & screw a mount to the face.
K-cup extractor with built in mason jar wide mouth lid. Prints without supports.
My small design experiment. Not the most practical thing, but maybe someone will like it too.
Print with 4 walls 25% 3D Honeycomb, Gyroid infill etc etc.. 3 top and bottom shell. Similar, if not the same, build instructions as the MK6. Take a part 1 POM wheel then put the two bearings in the slots in the motor plate, then the…
This is a game piece box with a sliding lid. There are design options for the box bottom and lid to have a mosaic pattern or solid surfaces, and flat or concave/recessed faces (on the lid). All of the lids will fit either of the box…
Powerbox Systems offers a softbag for their Core/Atom radio transmitters. The softbag has a foam insert with a number of recesses in which smaller accessories can be stored. The inserts provided here fit exactly into these recesses and…
Hello everyone 🙋♂ This project is a sliding door latch that uses a hemp cord. It is designed to prevent my cat from attempting to access the sex-toys door. It is very sturdy, especially when printed in PETG, but it also works very well…
Wall Split Flange Round Escutcheon Plate Cover for Various Pipes / Pipe Collar / Copritubo per idraulica Pipe Ø: Ø 20.7mm/ 0.81 inch Ø 25.8mm/ 1.1/2" Ø 29.9mm/ 3/4" inch Ø 33.7mm/ 1" inch Resize to adjust dimension If you download/enjoyed…
========================================================== UPDATE: I have released an improved version v3 which can be found here ========================================================== I saw the model from xoid but the zipper I needed…
Because I couldn’t find a pill organizer with a clean and appealing design, I created this compact weekly pill organizer that allows you to easily pour out your medication. Each drawer snaps into place using integrated magnets , giving a…
For building this drawers, you need a router, a drill and a saw. The router bits are 12mm and 18mm, also a pocket hole jig to fasten the front panels are helpfull. There are PDFs with the technical drawings, please refer to them, to see…
Fue diseñado en orca slicer, pero lo puedes modificar según tus necesidades, este archivo sencillo te permitirá ver los acabados superiores que puede realizar tu laminador y diagnosticarlo para mejorar su uso o detectar fallas en ciertos…
Material: I used PETG, but i don't see why PLA wouldn't work. I made this design because all other models i found were either secured with screws, something i can't do in my dorm, or were designed such that the force from the weight of…
A lid to print with the original model base, removes a box shaped face on the inside of the lid. Also positions the logo object for easier printing, either change colour by object for AMS/CFS, or print the whole object as one colour.
Please be aware that food safety is a complex topic and if you are storing food in 3d printed objects, you do so at your own risk. How to print (recommended) Scale: 100% Nozzle: 0.6mm All extrusion widths: 1mm All layer heights: 0.25mm…
3003 Fantasy Bits Mega STL Collection on Kickstarter Here’s the updated version with the correct Patreon link: 🔥 Want to stand out in the 3D printing market and attract more customers? 🔥 Now’s your chance to sell unique, stylish, and…
When making the box, make sure to enable supports (on build plate only). I used a 0.4mm nozzle with 0.15mm layer height. The photo above was printed in TPU (because the I gave away the ones that I made in PLA as gifts), and it works, just…
A cool bead that many 3D printing enthusiasts use a … Caliper! Very useful but I turned it into a bead :) really cool too it has the sliding function that a regular caliper has! Super cool 😎 Hope you enjoy!
This Furitek Slidetech ESC has a cutout on the bottom for airflow and cooling…which is really helpful….except for when looking to double-sided tape mount it to the car. I created this simple mount that allows the ESC to sit off the bottom…
Adaptació del genial projecte de Bikin_Creative Lineux One per adaptar-lo a una Voron Trident 350mm sense perdre àrea d'impressió. Encara estic a l'espera que arribi la “ClickyClacky door” i els perfils vermells de la part superior. Els…
My cat kept sliding open the closet doors in my office and knocking all my filament off the shelves so I made this simple latch to keep them shut. This is a small, quick print designed to hold sliding closet doors in place. It installs…
![CREALITY K1 MAX - LID RISER V3 [FRAME EXTENSION KIT]](https://media.printables.com/media/prints/1113589/images/8603616_60a7f138-6ba6-4188-bbf6-cdb880ec998a_f4300ca9-7596-4f4e-9ef3-f72931737ef2/k1max_projects_covers.jpg)
