1 / 1
Slide Projector Plant pot and Planter - Vase mode design — image 1

Slide Projector Plant pot and Planter - Vase mode design

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€4.09 – €5.00 net (excluding VAT)

For file: Slide_Projector_Pot_0.4n_0.2mm_PLA_MINI_4h38m.bgcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €4.55 excluding VAT (range midpoint).

Weight reported by the author
55 g
Print time reported by the author
4.64 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

A plant pot inspired by the intricate structure of a slide projector

Rating
5 / 5
Likes
53
Downloads
227
Makes
1
Views
704
Reviews
1

Updated at source:

Model information

Category
Home Decor
License
Standard Digital File License

A plant pot inspired by the intricate structure of a slide projector.

Used Filament:

This model was printed using PLA Mineral Natural from Fiberlogy.

The PLA Mineral series is our all-time favourite! The amazing texture of the finished print is just stunning! The print quality is also consistent and great, but we recommended to use a 0.6 or bigger nozzle, to archive such a quality. The end result (as seen above) is always spectacular! The cool colour and the amazing finish of the print really speaks for itself!

We really recommend testing this one out on your own and see the amazing results!

Fiberlogy Page: Fiberlogy 3D printing filament.

Print information:

  • Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)
  • Recommended using a lower layer hight (0.15/0.2mm) for better results in details
  • Prints very good in any filament
  • The model is scalable to your liking

Happy printing!

Tags