P
PrintablesMax
Organizer Desktop Organizer
Für SD-Karte, Stifte, Taschenrechner, usw.
- Downloads
- 51,545
- Likes
- 15,116
- Rating
- 4.92
Search results: desktop
Counting matching models…
P
PrintablesGemini Wing
Desktop pen holder for Sakura Micron pens
Vertical desk holder designed for Sakura Micron pens. Holds 24 across two tiers. Also Rotring Tikky, though they stick out a little higher. Holes are 11mm wide so anything else with a barrel that size ought to work. Print Settings Printer…
- Downloads
- 0
- Likes
- 0
- Rating
- 0
P
Printables
Small desk organizer desktop organizer organizers office organizer table pencil holder pen holder pencil stand easy print without support tested
Size base 140x109x19mm. Size holders 52x52(or 104)x107(or 77 or 47)mm. Filament need cca 70-90m. Next model:
P
Printables
Desk organizer desktop organizer office organizer table organizer pencil pen stand holder easy print without support
Size base 195 x 97 x 52mm(height without locks). Size holes for pencils 13.5 x 13.5mm. Use papers 9 x 9cm. Holes for USB, SD cards and micro SD cards too included. Vhen you need use glue for hard plastic (Tamiya, UHU…) for locks.
P
Printables
Desktop turtle sandbox
Desktop turtle sandbox. There are others and perhaps better ones, but I wanted to try my hand to fulfill request from my daughter. Some gluing required for the flange pieces that keep the lid in place. (sorry, tool not included) I have…
P
Printables
Filament desktop guid with FreeCAD file
This print is not a magic device. You need a lot of practice and patience and time to weld the filament together with Sunlu's filament connector (Filament Connector FC01). Any filament should work. I printed with 0.2 mm layer height 0.4…
P
Printables
Desktop Twist X - Impossible Passthrough
Comes with two different twist options; form fitted and round. Use a bit of glue on the print surface to ensure good adhesion. Printed with 15% Gyroid.
P
Printables
Sterilite Desktop Drawer Organizer
These models are drawer organizers for the Sterilite 2073 Small 3 Drawer Unit ( Link ). This is a work in progress . I will be working on various divider orientations as needed for my use.
P
Printables
Desktop Cornhole (print in place)
I printed two of the 1:12 size, which makes it just a little too small for Skittles and M&Ms. One in PETG and one in PLA. The PETG supports removed a little less clean, other than that, supports off, then snap the legs down and up and…
P
Printables
Desktop Toy Sword Wall Mount
This is a basic wall mount bracket for your desktop toy swords. When you're bored at the computer, you can play with a 10-inch sword of your choice. This wall mount displays those swords between plays! This is an upgrade from and…
P
Printables
Desk organizer desktop organizer organizers office organizer table pencil holder pen holder pencil stand pen stand easy print without support tested
Size 125x160x100(height)mm. J, K are inserts for I (F). For insert (B,C,D) you can use brim. Wall depth 3mm. Filament need cca 90-110m. First complete parts B(C,D) and E(,F,G,H,I). Seconds models:
P
Printables
TRU RED Desktop Stapler Kit Gridfinity Bin
The original design had a stacking lip on the bin which is not needed, and I had finger holes to get the staples and staple puller out, but it is easier to just dump it out.
P
Printables
Desktop storage unit with a hook
A storage unit to put things in that also has a hook on the side to hang things.
P
Printables
Desk organizer desktop organizer organizers office organizer table pencil holder pen holder pencil stand easy print without support tested
Size 108x135x105(hight)mm. For insert you can use brim. Tested PLA 0,2mm random seam. Next model:
P
Printables
Aluminum Cross-Bar Desktop Vacumm Adapter
This is an adapter for a Desktop Vacuum to clean your Printer's aluminum cross bars (or X bars). It has a guide to keep the vacuum aligned with the bars so you don't have to focus on keeping it straight! Works well in most places for my…
P
Printables
Gridfinity Desktop Baseplates
These Superlight Baseplates , whilst printing fast and clean, lack weight and slide around easily outside of drawers such as on desks and shelves. I've taken the aesthetic of the base from the Mini HSW x Gridfinity Organiser and made…
P
Printables
Desktop Stand for Shelly Wall Display
This can be printed in two colors, but of course it doesn't have to be. To do this, the files Stand.stl and Strip.stl must be imported into the slicer as an object. Those who have a MultiColor printer will know how. For those who want to…
P
Printables
Mini ITX Open Frame Desktop PC Case
Unleash your creativity with the Mini ITX Open Frame Desktop PC Case! This compact PC case is designed for enthusiasts who love individuality and seek the perfect blend of functionality and design. Why Choose Our Case? ✅ Printable on Your…
P
Printables
Cable organizer / desktop holder
Needed a cable organizer for my desktop, so made this one. Slots are big enough for bigger screen cables and centre the end with a hopper design.
P
Printables
Desktop edge vertical laptop stand / holder
A quick and adjustable laptop holder screwed to side of my desk for my MacBook 13". Printed in 3D FILLIES PETG on my K1C. Allows access to the USB - C connectors on the laptop (as long as you're OK with the apple being upside down ;))…
P
Printables
Yaesu FTM-150R Compatible Desktop Stand
Just got my Yaesu and realized I needed a stand to tilt the radio up, and provide a place for the microphone to attach. I came up with this simple model. This holds the entire radio and not just the face which is what I wanted. I printed…
P
Printables
Desktop fume extractor with exhaust
Googly eyes not included. This is a redesign of my previous fume extractor, made to be a bit sleeker on the outside and to have the exhaust come out of the side instead of the front for easier use. I also added a foot for stability, and…
P
Printables
3D Printed Desktop Fan v1
3D Printed Desktop Fan The heart of this budget-friendly fan is the DC micro-motor ($3.40 CAD) and a 5V 2A ($7.60 CAD) power supply. As shown in the GIF, the motor will not draw the full 2A and is sufficient to generate a strong breeze.…
P
Printables
Desktop Mini Garden Planter Set with Tray
Desktop Mini Garden Planter Set with Tray Bring a touch of nature into your space with the Mini Garden Set — a compact, elegant planter set featuring three individual pots seamlessly integrated into a single base. Designed for small…
P
Printables
Minimalist desktop phone holder
This is a minimalist desktop phone holder that is compatible with most smart phones and also allows them to be charged when in use. There is also a separate TPU feet that help with gripping the ground if it is too slippery. The TPU feet…
P
Printables
Device/Electronics desktop organizer
a cool all in 1 desktop device organizer for airpods, iphone and smart watch. This also allows you to charge your devices while in the stand.
P
Printables
Ubiquiti/Unifi - USW-Pro-XG-8-PoE Desktop Frame
The recent release of the USW Pro XG 8 POE has a lot of people excited due to it's small form factor with 8 10G-BaseT POE++ ports and 2 SFP+ ports. However, the switch appears to run quite hot. Idle temperatures with minimal ports…
P
Printables
Desktop drawer organizer tray
A useful and simple desktop organizer tray with two drawers. It can be combined with the marker pen organizer that you can download at: It does not require supports for printing.
P
Printables
Make Market Vinyl Tool Holder - Compact Desktop Organizer
Keep your vinyl crafting workspace organized and efficient! This Make Market Vinyl Tool Holder is a custom-designed desktop stand specifically sized for the standard toolset found at Michaels. Instead of searching through drawers or…
P
Printables
Desktop stand for Hikvision indoor station
It was created for and is compatible with the Hikvision DS-KH6320-WTE1 model, which is a KH6 Series IP-Based Indoor Station.It was created for and is compatible with the Hikvision DS-KH6320-WTE1 model, which is a KH6 Series IP-Based…
P
Printables
Desktop or safe stand for a Canik Rival/Rival-S/TP9
Works well. Print in black to hide the oils/carbon. The actual pictures are from an older design, the logo was changed to make it print better. The step file does not have the “Canik” filler, only the recessed areas. The 3mf file will…
P
Printables
Desktop Speaker Stand
These raise your speakers up 14cm, which is the perfect height for my desk. Inclulded are STL and Step files for all your remixing needs. You need one top, one bottom, one middle, one vertical connector, two short connectors, and 2 large…
P
Printables
Angled desktop stand
I’ve designed a holder for a 5 mm thick plate, positioned at a slight backward angle for optimal support or display. The underside features three recessed cavities fitted for 8 mm rubber pads to protect the surface beneath. Additionally,…
P
Printables
Desktop Tank Model
Desktop Tank Model A clean, modern armored tank designed to stand on its own as a decorative display piece. This model is perfect for desks, shelves, pianos, or any flat surface where you want a subtle mechanical accent. The tank features…
P
Printables
Turkish Electricity Car: TOGG T10X Desktop Model
Most waited Turkish electricity car TOGG T10X Desktop Model is finally with you ! -It is 15 cm model of the car. All parts fit the car well. -Combine parts with glue or similar adhesives. -Car body and stand need supports ! -Wheel spacers…
P
Printables
U7 Pro Wall – Desktop Stand + PoE Injector Box
Version 02 In this revision, the mounting method for attaching the U7 Pro Wall bracket to the printed vertical support has been improved. Instead of the previous M5 screw solution, the design now uses an M4 screw with a nut on the…
P
Printables
Simple desktop organizer
Simple desktop organizer I made for my notes and a complete package of pens to put in as well as my Stabilo marker pens. Takes about 1000 pcs. of A7 notes and 25 pens.
P
Printables
Desk Organizer - Honeycomb Desktop Caddy
Design Concept The Desk Organizer is inspired by a honeycomb structure, offering an aesthetic appeal paired with functionality. Its geometric design allows for neat storage with multiple compartments while adding a modern touch to your…
P
Printables
Nova Desktop (V1)
Nova Desktop is a tiny robot with a real personality — she can talk with you (voice + AI), spot you and track you, and respond with expressive micro-gestures: waves, points, shrugs, “listening” idle motion, excited poses, and mood-style…
P
Printables
Sonim XP5s Desktop Charger
Desktop Charger for the Sonim XP5800. The openings for the terminal contacts must be widened with a file to give the terminals free space to slide back and forward. I glewed the bottom part of terminals into place with supperglue. This…
P
Printables
Desktop fidget toy
This is a fidget toy & desktop figurine. The first part of this design has two holes that you can plug in the two screws conveniently provided and a cover that allows users to open and close as a fidget feature, even though you can't keep…
P
Printables
Desktop Monitor Mount/Stand
NEEDS TESTING! USE AT OWN RISK! Desktop monitor mount with 75/100mm vesa mount. Designed to swing horizontally 45° with a pivot range of 10°. Mounting the main stand: Position the spring clamp mount to any thickness desk as required.…
P
Printables
Nova Desktop (V2)
3D model description Nova Desktop is a tiny robot with a real personality — she can talk with you (voice + AI), spot you and track you, and respond with expressive micro-gestures: waves, points, shrugs, “listening” idle motion, excited…
P
Printables
DESKTOP STAND FOR BEHRINGER EDGE/SPICE/CRAVE/GRIND (SCREW MOUNTED)
A 40° angled desktop stand for the BERHINGER EDGE, SPICE, CRAVE & GRIND that screws directly to the synth for stable, comfortable hands-on control. Replace the wooden side panels with the printed parts and add 7–8 mm rubber feet in the…
P
Printables
Satisfying gear desktop mechanism
Super easy to build parts list https://bodekier-blueprint-labs.base44.app/builds/69ceb587f041cbedccd211a9
P
Printables
Scotch yoke satisfying desktop mechanism
Parts required: https://bodekier-blueprint-labs.base44.app/builds/69ceb587f041cbedccd211aa
P
Printables
VE7ZAX Heltec Vision Master E213 Meshtastic Desktop Node Case.
Simple and cute quick printing case for the Heltec E213 eInk node. There's even a little room for a battery if you're so inclined. Whipped this together for my desk and though I would share if anyone else with the same node wants it...…
P
Printables
Mic_desktop_clamp
Mehr Infos: https://www.instagram.com/reel/DTNKP_fDcVk/?igsh=c3QzN3RuM3pubjIz 08032026 Update Ich habe nun eine lange (50 mm) und extralange (70 mm) Version hinzugefügt. Die maximale Plattenstärke beträgt bei der langen Variante ~45mm und…
P
Printables
Mini HAL for desktop or wall.
The quick description. This version was created to house a motion activated night light. My rendition of HAL 9000 from 2001 a space odyssey but in a smaller enclosure. I made a 1::1 version some years back that had manual light control…
P
Printables
Nova Desktop (V3) AI Humanoid Desktop Companion
An AI desk companion that feels present — she tracks you, talks out loud, and reacts with expressive body language. V3 adds a new reasoning model, memory with summarisation, and 35+ extra animations with talk-time micro-gestures. Learn…
P
Printables
Desktop Paper Stand/Document Holder with Flat Face
This is a Page Stand, also known as a Document Holder, used to hold papers upright for transcribing them, or reading them as notes. This is based off a design I had when I was in High School, and while I can't include the neat…
P
Printables
UGREEN GaN 5-in-1 65W desktop charger
Model to mount the UGREEN GaN 5-in-1 65W desktop charger under the desk
P
Printables
Basic 4030 Desktop CNC Router Design for 65mm Spindles
This a super basic 4030 Desktop CNC Router Design for 65mm Spindles, eg a Makita Router or 1.5kW Air-cooled VFD unit. I'm publishing this due to a request, however it doesnt fully match my current machine spec, and may be incomplete in…
P
Printables
Modular Desktop-Rack
Modulares Desktop-Rack für Synology DS218+ und externe Festplatte oder ähnliches Dieses kompakte und stapelbare Rack wurde speziell für die Synology DS218+ (120 mm Breite, 175 mm Höhe) sowie eine externe Festplatte (120 mm Breite, 50 mm…
P
Printables
NSPanel Pro desktop stand
This NSPanel Pro desktop stand is designed to fit the 3.95" model. It's designed to be printed upside down to leave the best possible finish on the part of the stand that is visible. It only requires support on the frame of the…
P
Printables
Desktop Hole Cap
Cap for 1/2" hole in the desktop. Fits a USB-C cord. Printed in 3 parts - All are in PLA.+. 0.2 layer height.
P
Printables
Kynup CR2032 caliper desktop holder
I saw a model similar to this but not for my Kynup CR2033 caliper. So I made one. Holds your caliper neatly on your desktop.
P
Printables
Double-stage rack for desktop music gear
A simple to print and assemble double-stage rack for desktop music gear Part list: M3X5x4mm heat insert https://amzn.to/4r0Lzfe M3x5mm bolt https://amzn.to/4k6mgpv
P
Printables
Miniature Mesh Desktop Trash Bin - Under 1 Hour - Easy Assembly - Fuzzy Skin
Print Specifications Specification Value Estimated Print Time 57 Minutes Filament Used 12.4 g Filament Length 4.16 m Print Settings Setting Value Layer Height 0.24 mm Wall Thickness 6 perimeters Infill Density 25% (gyroid) Top Layers 0…
P
Printables
Headphone Jack Desktop Panel - Perpheral Panel - 3.5mm - USB
Wanted a panel to mount a 3.5mm headphone jack on my desktop, but couldn't find a good model on here so I made one! Its a simple model big enough for 1 or 2 connections. For flexibility I didn't add any holes in CAD, so you could also put…
P
Printables
1980's Console TV desktop cell phone holder
Here is one I thought was fun. You download your favorate 1980's tv shows to your cell phone. and place it in this little TV and watch it on your desk or nightstand. It reminds me of watching Saturday morning cartoons as a child. You can…
P
Printables
Desktop Headphone Stand
This headpone stand has a rester for the earcups and a rester for the headband. This means that your headphones stay secure and tidy on your desk.
P
Printables
Innox IVA MON-07 / Millenium Desktop Monitor Stand DM3 cable clip
I created this copy of the original clamp as an extra guide for my audio- and powercable going to my monitors. Tested them on my Innox IVA MON-07, but the Millenium Desktop Monitor Stand DM3 looks the same.
P
Printables
Desktop Lectern
Lectern to be made out of 4 parts which can be mounted to a strong lectern and can be dismantled simple for transport.
P
Printables
Simple Triangular Desktop File Folder Holder
Simple but effective. Includes Fusion 360 file if you want to tweak or remix.
P
Printables
Digitec GaN 4-Port Desktop Charger Skadis mount
Ikea Sadis mount for a Digitec 4 port GAN Charger https://www.digitec.ch/en/s1/product/digitec-gan-4-port-desktop-charger-120-w-usb-chargers-24556925 Prints without supports, 3-4 perimeters, might want to add a modifier for 100% infill on…
P
Printables
AT - Compact Desktop Computer Mother Board
Nice to have to stabilize the mother while I work on it, or to display it after I have it working. I do not have the computer case this came out of. Uses 3mm heat inserts. short 3mm screws used to mount motherboard.
P
Printables
Desktop office supply holder
This desktop orginizer is used to hold your pens, pencils, markers, paperclips, buisnes cards .
P
Printables
Desktop organizer/storage box (Iris mechanism)
Print the parts as many times as listed below: 6x Iris box_pocket 1x Iris box_bottom 1x Iris box_top 1x Iris box_screw wheel You will also need one plastic screw (W1413) (7mm long; 2mm wide) or print the screwless version. Important…
P
Printables
AA Battery Holder – 3D Printed Battery Organizer, Easy Print, Desktop Storage
This 3D‑printed battery organizer is designed to neatly store AA and AAA batteries in separate labeled compartments. Its compact, upright layout keeps batteries easily accessible while preventing them from rolling around. A practical and…
P
Printables
Different Desktop Organizers
You need 6 drawers for the organizer, other are all just one part models
P
Printables
Modern Desktop Tape Dispenser – Sleek
This is a sleek and functional desktop tape dispenser designed for 3D printing. Its modern, minimalist shape makes it a stylish addition to any workspace, while being highly practical and easy to print. The dispenser includes a built-in…
P
Printables
Stolni ikea skadis/Desktop ikea skadis
STOLNI IKEA SKADIS-IKEA SKADIS po domaću SKÅDIS ti je ono, ploča s rupicama šta je IKEA napravila da ti više ne bude kaos po stolu. Staviš je isprid sebe, nasloniš je na onaj njihov stalak i sve ti stoji lipo, k’o čoviku. Nema više da ti…
P
Printables
Ultimate Modular Desktop Organizer
Ultimate Modular Desk Organizer – Organize Your Chaos Summary Tired of a messy desk? This Modular Desk Organizer is designed to be fully customizable to fit your specific workflow. Whether you are a maker, a student, or just someone who…
P
Printables
Shark USB Barracks - Heavy Duty Desktop Organizer
[EN] Rugged, military-inspired desktop organizer. Heavy base design prevents tipping. 3x Standard USB-A Slots. 3x USB-C / MicroSD Slots. [ES] Organizador de escritorio robusto de estilo industrial. Su base pesada evita que se vuelque al…
P
Printables
Desktop Screw Organizer
I designed this model to prevent screws from getting lost on your desktop. It has four compartments where you can put any type of screw you want. The model measures 70x80 x 22 cm. You can print this model with a 3D printer using filaments…
P
Printables
Sticky Note & Pen/Pencil Holder - Desktop Organizer
Simple desktop organizer I created to hold my tall pad of sticky notes and some pens & pencils or whatever kind of small tools I want to have on hand.
P
Printables
Modern desktop clock
Overview An elegant oval-shaped desktop clock that combines minimalist design with a striking textured surface finish. This exclusive model is compatible with standard Bambulab clock mechanisms and is available only through MakeWorld's…
P
Printables
Desktop 3D Print Tool Caddy
Needed a tool rack that housed my tools, I have a few different pliers, cutters, glue, brushes, etc, and could never find a rack to suit me. So, what do you do, you make your own. Note this is a version one and I will be improving it over…
P
Printables
Panasonic FZ-G1 Desktop Stand
This particular print was printed for outdoor longevity using PA6-CF 3 Walls 10% Gyroid infill No Supports.
P
Printables
Modular Desktop Shelf – No Support & Expandable
Modular Desktop Shelf – No Support & Expandable This is a sturdy, four-piece desktop shelf designed for maximum stability and future expandability. The assembly is fully mechanical using M3 hardware, ensuring a long-lasting connection…
P
Printables
Satellite1 Desktop Speaker
Satellite1 Desktop Speaker – High-Fidelity 1.5L Enclosure (DMA80 + DMA105-PR) Elevate your local voice assistant with this premium, acoustically optimized enclosure designed specifically for the FutureProofHomes Satellite1 Dev Kit .…
P
Printables
Expressive Screaming Crazy Faces Terrarium or Desktop Decor
These models are expressive, open‑mouth screaming faces with exaggerated features and a tongue‑out pose. They’re designed as fun, surreal sculptures that print cleanly and look great on a desk, shelf, or display stand. The strong facial…
P
Printables
GB Flash Desktop Holder
So its a desktop holder for the GB Flash by LesserCuma and GeekSimon, it was printed with the Creality Ender 3 V2 and PLA plastic. Made for 2.5cm thick desktop.
P
Printables
Ornate Floral Skull — Life-Size Desktop Organizer / Planter (Scalable)
A stunning, highly detailed Ornate Floral Skull designed in 1:1 life-size scale . This piece combines gothic aesthetics with baroque elegance, featuring a deep relief pattern that looks incredible with silk filaments or post-processing…
P
Printables
normal desktop organizer
I hope you all like it if you do please comment or post a make use it however you want i don't care
P
Printables
Desktop Dock and Glas-styled Wall Sconce for Seeed Studio TRMNL DIY kit with 24-pin B/W or 50-pin Colour Display
This is a minimalist desktop enclosure and Glas thermostat-inspired wall sconce to display your Seeed TRMNL DIY kit with the 24-pin 7.5" B/W TRMNL display or the 50-pin 7.3" E Ink Spectra 6 Colour display. Note: Choose the correct Core…
P
Printables
Space Explorer Desktop Set - 5-Model STL Bundle for 3D Printing
## Space Explorer Desktop Set - 5 Premium 3D Models 5 space-themed desk organizers combining form and function. Astronaut pen holder, rocket phone stand, moon dish, Saturn cable organizer, and space helmet headphone stand. ### What's…
P
Printables
Desktop Organizer (Fence design)
My design for a sturdy and stylish desktop organizer features slots for USB sticks, microSD, SD, and a Casio FX991 calculator (most calculators and phones should fit too). Post your makes! Dimensions Width: 92mm Length: 88mm Height: 85mm…