MiniStealthburner Cowling with ECAS04 and a modified ZeroClick Cutout by JackJack3231
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified @1ri_263394's cowling modification to add a cutout for the modified ZeroClick attachment by @JacobG3231_143196
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
I wanted to be able to use the ZeroClick with my Voron 0.2 but also wanted a filament sensor in the toolhead for eventual integration with a MMU setup like the ERCF. The offset version of the mount is featured in the photos, because I have a part cooling fan in my V0.2.
Attach the modified ZeroClick with two M2x10 Self Tapping screws. The holes are slightly different in size to account for differences in wall thicknesses, so install the outboard screw (right, as looking at the pictures) completely first, to ensure the left screw does not wander towards the thinner wall.
Also added a cutout for the hotend fan to go up the left side in addition to the right.
Use Voron Standard print settings.
