Playseat Challenge T300 Wheel Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple spacer to allow mounting the T300 wheel further to the front on the Playseat Challange.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 1522
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I had the issue that I could not mount the T300 wheel far enough away from me. The reason for this is the “lip” on the front of the wheel that only allows one mounting position on the playseat challange. I designed this simple spacer that can be mounted between the wheel and the base plate. This way the base plate can be rotated 180° and the wheel can be mounted quite a bit further to the front.
I provide all my models for free, if you want to support my work, you can buy me a coffee!
Additional notes regarding how to mount this: It seems it was not as obvious how this is to be mounted as I thought it is intended to be used. First you have to unbolt your base plate. You can than swap the orientation by 180° horizontally, such that the original front part is now on the back. Remount the base-plate in that orientation. You can than place the spacer on the base plate and place the wheel onto that. You can than screw the wheel using the screws that will go through the spacer, into the wheel base.