P
Printables
sim racing th8a shifter
6X3X2.5 mm bearing X4 Wire diameter 1.2mm, inner diameter 10mm, length 12mm Spring X1 Hose clamp X1 insert molding nut M3 5mm X3 M3 screw 10mm X3 zip tie 150mm X2
Wyniki wyszukiwania: th8a
Liczymy pasujące modele…
P
Printables
Thrustmaster TH8A adapter gearbox
Ich habe für einen Freund diese Datei entworfen. Sie ist um bei einem Thrustmaster TH8A den 7 Gang auszublenden um nicht in die Schaltgasse des siebten Gangs zu rutschen. Wie man sieht wird das Teil nur eingesteckt und kann daher auch…
P
Printables
Playseat Challenge TH8A Shifter Mount
Robust mount with a shorter cantilever for higher strength and stiffness
P
Printables
Playseat Challenge Shifter (TH8A) and Handbrake (Moza HBP) mount
This model was inspired by the design of DonKeulito . I needed to re-design the model as my angle of the tube it attaches to did have a different angle and I needed it for a different handbrake and shifter. The chair can still be folded…
P
Printables
Sport Shift Knob for Thrustmaster TH8A
I designed this to try to match the feel of my GT86. I printed mine with 80% infill for the extra weight.
P
Printables
Thrustmaster TH8a Shifter Mount
A shifter mount i made to side mount onto a piece of 8040 so that i could have both my sequential shifter from moza and my thrustmaster th8a (with trucking shift knob) at the same range from my seating position. Uses 4xM8 bolts (with…
P
Printables
Thrustmaster TH8A Shift knob
I designed a screw on shift knob for the Thrustmaster TH8A shifter. Just remove the old one and screw on the new printed one with a little presure from above. I used PETG.
P
Printables
Thrustmaster TH8A gear shifter gear blockers/fillers
I found that when using the thrustmaster th8a shifter on cars with less than 7 gears, i would sometimes accidentally put it in a gear that didn't exist. These gear blocker/fillers eliminate that issue when you are driving a car with 4, 5…
P
Printables
Thrustmaster TH8A Gear Lever Protector
If you have installed a short shifter mod, you'll find that there is no protection from scratches on your gear lever stick from hitting the faceplate. Sure you can heatshrink some tubing, but that will only last you a week before you'll…
P
Printables
Bicycle grip adapter for Thrustmaster TH8A shifter
This adapter allows you to attach your favorite bicycle grip as a shifter knob to the Thrustmaster TH8A shifter. When I was playing a WRC simulator, I found myself wanting a stick-shaped shift knob like those in rally cars. Since I had…
P
Printables
TH8A / TH8RS Mini Button Box - Split Mounting Base
Hi Internet Sim Makers, This is just a very quick remix of the mounting plate for the TH8A / TH8RS Mini Button Box by AndreaSmit. https://www.thingiverse.com/thing:2883090 Absolutely no credit taken here... all I did was split the base…
P
Printables
Thrustmaster TH8A to Sparco Gear knob (More Secure Fitment)
The Sparco gear knob is a popular low cost shifter for your Thrustmaster TH8A shifter, but the fitment leaves alot to be desired. This adapter securely mates the TH8A thread to the internal diameter of the Sparco knob with zero flex .…
P
Printables
sim racing th8a shifter
6X3X2.5 mm bearing X4 Wire diameter 1.2mm, inner diameter 10mm, length 12mm Spring X1 Hose clamp X1 insert molding nut M3 5mm X3 M3 screw 10mm X3 zip tie 150mm X2
P
Printables
M12 TH8A TactMod+
TH8A TactMod+ by @zhutwo, with holes for M12 ball plungers. I was not able to find M12 nylon-ball plungers shorter than 20mm, which required a slight modification to the casing, but this provides the best tactile "bump." Category: Hobby
P
Printables
Thrustmaster TH8A Table clamp
I made this bracket because i bought one without a bracket and want it lower from the table. 2 M8 nuts and 2 M8 wing bolts are require.
P
Printables
Cockpit Mount Thrustmaster TH8A - 3060 Aluminum Profile
I redesigned the part considering the dimensions of the 3060 aluminum profile and 6mm holes for M6 screws. I printed it with 25% infill
P
Printables
ETS2/ATS Custom Shift Plates for Thrustmaster TH8A
My collection of custom shift pattern plates for the Thrustmaster TH8A Shifter for use with ETS2 and ATS. The following gearboxes are covered: Scania 12 and 12+2 Volvo 12 and 12+2 ZF-12 and ZF-16 Eaton Fuller 10, 13, and 16 There is also…
P
Printables
Thrustmaster TH8A adapter gearbox
Ich habe für einen Freund diese Datei entworfen. Sie ist um bei einem Thrustmaster TH8A den 7 Gang auszublenden um nicht in die Schaltgasse des siebten Gangs zu rutschen. Wie man sieht wird das Teil nur eingesteckt und kann daher auch…
P
Printables
Thrustmaster TH8A Shifter screw clamp replacement
The threads on my thrustmaster shifter clamp had worn out completely so I made this to replace them. You need to print 1 of the base and 2 of the screws. How to install: Remove original screw: I used bolt cutters because I couldn't find a…
P
Printables
Playseat Challenge TH8A Shifter Mount
Robust mount with a shorter cantilever for higher strength and stiffness
P
Printables
TH8A Shifter Mod TPU / Flex Edition
This is a slightly altered version, intended to be printed with TPU (flex) as I don't like the idea that the metal shaft is simply rubbing against rigid plastic. I'd describe the feeling as “dampened”. It's still notchy and tactile but…
P
Printables
Scania Shift Knob Truck Adapter Thrustmaster TH8A
The intermediate apparatus I designed to attach the Scania gear shift knob.
P
Printables
Thrustmaster TH8A Shifter Mod
TH8A Shifter Mod Block to make the shifting feel more tactile.
P
Printables
Thrustmaster TH8A short throw knob
Printing recommendations I've printed a first prototype in PLA, we'll see how long it lasts. Might print an ABS/ASA one and vapor smooth it for better finish. 0.15 LH 0.4mm nozzle No supports required Use high infill (I've used 50%) to…
P
Printables
Thrustmaster TH8A short throw knob (colorful remix)
I've done a couple of changes since the original model: Made it a bit shorter (doesn't affect the overall length as the thread is in the same place). Split the model into 3 to print the middle part in a different color.
P
Printables
Remix - Playseat Challenge Shifter Mount - Surface - TH8A part
Remix of just the surface part from https://www.thingiverse.com/thing:3569302 to provide the bolt holes for the TH8A. There are several other TH8A remixes out there - but they also tend to merge the surface and outer bracket. I am…
P
Printables
TH8A shifter Playseat Challenge mount
TH8A shifter Playseat Challenge mount Robust shifter mount for mounting Thrustmaster TH8A to a Playseat Challenge sim racing chair. Printing Rotate the models as shown below. Use supports. Use at least 5 wall loops. Mounting Use six M6…
P
Printables
Playseat Challenge Shifter with Handbrake Mount TH8A/G29
I use the original jeoje's model but adding the plate for the handbrake, and the holes for the thrustmaster th8a. Assembly Instructions: This was designed to be assembled with 30mm M3 screws with 5.5mm nuts. Print Settings Rafts: No…
P
Printables
Playseat Challenge Shifter (TH8A) and Handbrake (Moza HBP) mount
This model was inspired by the design of DonKeulito . I needed to re-design the model as my angle of the tube it attaches to did have a different angle and I needed it for a different handbrake and shifter. The chair can still be folded…
P
Printables
The smallest th8a shift knob
Thread pitch - 1.25 Thread diameter - 10mm Compatible with Logitech G25, G27, G29, G920 and Thrustmaster TH8 Print PETG with 15% infill ASA - not tested PLA - not tested
P
Printables
Sport Shift Knob for Thrustmaster TH8A
I designed this to try to match the feel of my GT86. I printed mine with 80% infill for the extra weight.
P
Printables
cable holder TH8A
cable post for ANX truck gearbox but it can also go with any other way, I made 2 slots for 2 clamps with a width of 3.45/3.50mm printed with light weight media and if possible for easy printer cleaning without brim truck knob i used :…
P
Printables
Thrustmaster TH8A Shifterknob
A beautiful shifterknob i remixed Shortened and rethreaded to fit Thrustmaster TH8A Printed in Polyterra black 0.2mm
P
Printables
Thrustmaster th8a 6-gear-mod
A mod to reduce the shifter to a 6-gear version. No more accidentally slide into the 7th gear while shifting into 5th.
P
Printables
THRUSTMASTER : TH8A Shifter Accessories
Technical information for all model files: Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability, add : 7 perimeters to plates 5 perimeters to the knob 15% Infill For Knobs' better grip texture, we recommend you to use…
P
Printables
TH8A H-shifter mod M6 with pads
With printed 3.5mm pads Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Doesn't Matter Resolution: 200 Infill: 50 Filament: CCTREE PLA Category: Hobby
P
Printables
Thrustmaster TH8A gear shifter - 7th gear blocker
A tiny blocker for the Thrustmaster TH8A shifter. It's a bit longer than other models, to block the path to the 7th gear. In a normal movement to the right, you will hit the print and with a bit pressure you can go into reverse. Print…
P
Printables
Playseat Challenge Shifter (TH8A/G29) with handbrake mount
Playseat Challenge mount for a Shifter (TH8A/G29) with handbrake mount
P
Printables
Gear Shifter Knob for Thrustmaster TH8A
The hole is 8.5mm so you can take a M9 thread cutter to make it fit on the original shifter pole.
P
Printables
Thrustmaster TH8A Clamp
I bought my shifter used.. with no clamp, sounds like a project for the 3D printer. The clamp turned out pretty tough, seems with withstand the abuse. Only time will tell. Brief Instructions: -To reinforce and add to the longevity, i left…
P
Printables
Thrustmaster TH8a Shifter Mount
A shifter mount i made to side mount onto a piece of 8040 so that i could have both my sequential shifter from moza and my thrustmaster th8a (with trucking shift knob) at the same range from my seating position. Uses 4xM8 bolts (with…
P
Printables
Thrustmaster TH8A Handbrake Plate
No other tools required. I printed it with the sturdy profile, arachne, and a 0.6mm nozzle on a P1S.
P
Printables
REMIX Playseat Challange Shifter (TH8A) and Handbrake (Moza HBP) mount
Remixed Harsesis Playseat Challange Shifter (TH8A) and Handbrake (Moza HBP) mount according to his recommendations which was to move the hand brake a bit further to the front and the shifter a bit to the outside (right). Also added slots…