Remix - Playseat Challenge Shifter Mount - Surface - TH8A part
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of just the surface part from https://www.thingiverse.com/thing:3569302 to provide the bolt holes for the TH8A.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 1127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
Remix of just the surface part from https://www.thingiverse.com/thing:3569302 to provide the bolt holes for the TH8A.
There are several other TH8A remixes out there - but they also tend to merge the surface and outer bracket. I am printing on a prusa mini so I needed to keep the split.
Can't link to the author on here in the remix field as they are not on this site - so - direct link - https://www.thingiverse.com/jeoje/designs
Print with the area with the recessed holes for bolt heads down to the plate (upside-down to how it will be mounted when done)
Quick note - on my print I closed off the holes where it attaches to the rest of the mount as I didn't have the hardware - but I did have some 5 minute epoxy - so that's why the screw holes are not on the photos - this is the “Surface-TH8A-remix-glue” STL