1 / 10
SHH Shifter (+ opt. Handbrake) Mount - Playseat Challenge — zdjęcie 1
1 / 10

SHH Shifter (+ opt. Handbrake) Mount - Playseat Challenge

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an extremely sturdy and flex-free SHH Shifter and/or Handbrake mount for the Playseat Challenge, based on the…

Ocena
0 / 5
Polubienia
72
Pobrania
667
Wydruki
2
Wyświetlenia
8180
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is an extremely sturdy and flex-free SHH Shifter and/or Handbrake mount for the Playseat Challenge, based on the TH8A mount from floano:

https://www.thingiverse.com/thing:3325124

Customized to hold the SHH Shifter and/or a handbrake

SHH Shifter with TH8A Mount: https://www.shiftershh.com/en/extra-mounts/21-152-soporte-extra-th8.html

Handbrake (with Discount Code) from Aliexpress: https://s.click.aliexpress.com/e/_EupzTXT

You need to print the Mount-Clamp and one of the mounting options

  • SHH Shifter
  • SHH Shifter + Handbrake

(If you'd like a Handbrake only mount, please add a comment)

The mount is build for the TH8A mounting option from SHH Shifter

You will need

  • 4 x M4 bolts, 30 mm (or longer, I used 35mm)
  • 4 x M4 nuts and washers (these are included with your SHH Shifter).

You can't use the bolts included with the SHH Shifter, as these are too short.

Additionally, I wrapped some anti-slip tape around the tube to increase the grip and added double-sided tape within the clamp.

If you want to print the SHH Shifter + Handbrake mount, you'll need additionally

  • 4 M6 x 30mm (or longer, I used 40mm)
  • 4 M6 Nuts and washers (4 or 8)

I printed with a 0.6 nozzle, 0.45 layer height, 0.72 layer width and 35% infill.

It printed in around 12 hours. If you use a smaller nozzle you might want to print with more walls and 0.48 layer width to make sure the walls are 4mm+ thick.

Another recommendation: Add support blockers in the mounting holes to avoid frustration (see screenshot of Cura for orientation and support blockers)

For Left Hand Drive mirroring in your slicer should do the trick.

Happy shifting, braking and printing ✌

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3

Rafts:

No

Supports: 

Yes

Resolution:

0.45 (with 0.6 nozzle)

Infill: 

35 or more

Filament: SUNLU PLA+ Black


 

Notes:

 

see description

 

 

 

Category: Video Games

Tagi