Liczymy pasujące modele…
A remix of Printojet's amazing design. Strong enough to be used without the front bar support with 2 sets of stiff springs. Bolt fork much stronger to cope with sudden joystick end-of travel bumps. Designed to have no flex with PLA <40%…
In obstacle course racing and modern pentathalon, one of the challenges is to use a gun "simulator" to shoot some targets. Of course, this happens after running, so your hands are shaking! Buying a proper simulator is pretty pricey, and…
Golf Simulator Control Box A compact, high-performance control box designed for golf simulator shells. This model is smaller than previous designs, ensuring it prints faster and fits standard printer beds. It features the SkyTrak Course…
Grip for flight simulation 0.16 layer height is recommended All the components are avaiable on : https://polysim.fr How to assemble : https://www.youtube.com/watch?v=2aSrMxbHL8U&ab_channel=Polysim
After making and testing a wind simulator for my sim racing rig, I needed a good case to mount the Arduino Nano safely on my rig. I tried to make the case as small as possible, with easy access for 3x PWM fan output and USB-C and 12v DC…
I didn’t like the stock TCA flap lever — it lacks the normal A320 “lift to move” action, which led to accidental position changes. So I designed a replacement flap lever with a proper pull-to-move mechanism and tactile detents. It feels…
This project presents a 3D-printed knee arthroscopy simulator developed for medical education and surgical training. The simulator was designed to provide an accessible, reproducible and low-cost training platform that allows students and…
a monitor mount for the rk1 sim rig needs M12 2PCS, 70mm https://ar.aliexpress.com/item/1005008081039320.html?spm=a2g0o.order_detail.order_detail_item.7.74e0f19c8F03Pa&gatewayAdapt=glo2ara
Bring the Dymon 4000 Single Engine experience into your home cockpit with this complete DIY kit. A realistic single-engine throttle and control module inspired by modern general-aviation aircraft. No electronics knowledge required — just…
-Requires about 6 to 7 rolls of filament with 6 walls print settings for strength. -BUILT FOR MOZA SETUPS, I measured with my r5 wheel hub and SRP-Lite pedals so you may need to double check or modify the design to work with other setups.…
a small indicator light to show which implement is being selected. For the colloring I used 2 layers of standard white. I've a standard printer with just one color, you could pause the g-code manualy and swap out the color. With 2 layers…
Two versions available. Large single print or 2 pieces interlocking dovetail for smaller print bed sizes. -No supports needed. Use at least 4 walls & 8 bottom/top layers for strength. 4 mounting holes with countersunk nuts (M6) metric…
January 2026 Uploaded 3mf file so you can already print things. An update with instructions will follow shortly....stay tuned.
The part that goes through the front mount is a very tight fit, on purpose, so that it will stay in place in a motion rig. I printed it on a Bambu Lab X1C, PLA, 0.4mm nozzle around 25-35% infill. Credits to Hagbany & Darkchild who are the…
This is an adapter plate for the Virpil CM3 for the nextlevelracing boeing military fight sim rig. It's intended to replace the bottom metal plate of the throttle with the existing screws. An alternate version that uses much less plastic…
a friend wanted some golf tees for his sim. So this is what I came up with
Description This project presents a 3D-printed simulator for training in lumbar spine endoscopy , developed as reproducible educational tool. The simulator allows training of basic endoscopic spine surgery maneuvers such as: • spatial…
GT GranTurismo - Driving Simulator Videogame - Key chain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thks Category: Video Games All trademarks,…
Adapter to mount Moza R9 wheel base to GT Omega ART Simulator.
Got a request for GAIM VR for Blaser R8. VR Simulator with Oculus 2 and 3. Have 2 friends from work who requested to make their GAIM VR more realistic to use the real rifle for training in GAIM VR. Both of them say they become better in…
The Printables version will not be updated. The best place to get it is here: https://captainbobsim.com/product/the-cessna-172-project-files/?customize_changeset_uuid= Kit can be purchased here:…
Not my model. Just reposting here. Credit to the original creator! Thanks for this, can't wait to give it a try. A replica PMN-2 landmine for wargame & military training. Cheaply create landmine simulators to enhance your training. One…
Hypothetical Argument Simulator Room sign Category: Signs & Logos
Hypothetical Argument Simulator Room sign Category: Signs & Logos
Simple wind simulator fan holder for 140mm fan, I use this with Noctua NF-A14. Could be attached to aluminium profile.
Next level Racing Flight Simulator holders to rest the quest 3 controllers for those who use them
A remix of Printojet's amazing design. Strong enough to be used without the front bar support with 2 sets of stiff springs. Bolt fork much stronger to cope with sudden joystick end-of travel bumps. Designed to have no flex with PLA <40%…
Bee is a bee from the Roblox game Bee Swarm Simulator created by Onett. I superglued the top onto the bee. Cobalt Bee Companion
Cobalt Bee is a bee from the Roblox game Bee Swarm Simulator created by Onett. I superglued the top onto the bee. Crimson Bee Companion
I didn't want to use the extremely bulky provided hardware to hold the keyboard, so i designed this 3-piece part that bolts on the throttle plate and snugly holds my keyboard (Havit Low profile) Designed to use M3 screws and heatsets. I…
This is a WIP will continue to edit as I print and build this.
Hello again :) I designed a keychain from the game FS 25. Farming Simulator 25 will be released soon. Please like and share for more :)
Inspired by the 12 Button macro keyboard I modified the model for Euro truck simulator. I made 12+1 keycaps for euro truck simulator. And I rewrote the code for the Arduino so that the keypad is now recognized as a game controller so that…
Autopilot module based on the Garmin GFC500 for your flight simulator cockpit. You will need the custom PCB which is also open source from https://github.com/happy12/Sim_Autopilot
I printed this for a test and liked it, so I'm posting it. Some of the parts have tight placements, so it might be difficult to put them together.
Little Logo of Farmin Simulator 25
Simple case with no fasteners, I remixed "The Ultimate Box Maker" using fusion360 to not need screws to hold the case together. (Still need at least 2 to hold the board in place)…
Layer height of 0.20mm Logo designed to also be printed with a monocolor printer. Change color you layer 41 on the 25th, 43 Internal edge, 45 the writing fs and 47 the black…
Keychain with the Construction Simulator logo. Print Settings: Perimeters: 2 Nozzle: 0.4 mm Layer height: 0.16 or 0.20mm
This is just the updated version of my golf simulator control box for GSPRO. This will eventually make it into production as my version 2 of my no program plug and play golf simulator control box. As always I make them available so people…
Included some small colored plugs if you glue the project. Alternatively it supports the M3 use as per the original.
The "leftovers" in the files are those little sticks on the background (they are snapped in half)
The Wind Cannon 2 is an engineered 3D printable fan system configured to hold two (2) pulse width modulation (PWM) fans (120mm) in an inline configuration. PWM fan output can be linked to PC simulation/game telemetry via an Arduino +…
Mid and Contacts must be printed on SLA Cap, Back and Front on FDM Parts: -SPL-10 coil: 1 -M4x12: 1 -M3x12: 2 -10440 li-ion: 3 -M2 nut: 2 Brass -M2x10: 2 Brass https://oshwlab.com/tl431/smokev1
In obstacle course racing and modern pentathalon, one of the challenges is to use a gun "simulator" to shoot some targets. Of course, this happens after running, so your hands are shaking! Buying a proper simulator is pretty pricey, and…
Helps lining up triple monitors for simracing. Side monitors tend to start sagging on the bottom, this tool helps to line it up to the centre monitor.
Golf Simulator Control Box A compact, high-performance control box designed for golf simulator shells. This model is smaller than previous designs, ensuring it prints faster and fits standard printer beds. It features the SkyTrak Course…
Create custom indoor golf tees of any size for use in a golf simulator. A selection of standard sizes from 25-55mm has been included as .3mf files. By using the .f3d model, tees can be adjusted to any height using the Modify > Change…
KR87 ADF Radio for Flight Simulator Details, PCBs, and instructions here! The Printables version will not be updated. The best place to get it is here:…
Platform for flight simulation 0.16 layer height is recommended ll the components are avaiable on : https://polysim.fr How to assemble : https://www.youtube.com/watch?v=ZJVehHBs4Xg&ab_channel=Polysim
Grip for flight simulation 0.16 layer height is recommended All the components are avaiable on : https://polysim.fr How to assemble : https://www.youtube.com/watch?v=2aSrMxbHL8U&ab_channel=Polysim
Tired of collecting your tee after every shot of your golf mat? Introducing the Golf Tee Anchor System. This is designed to be used through the tee holes that generally come already punched out through your golf mat. Install in a few easy…
Parking break mechanism for your homecockpit. The radial center design with the long holes will allow to mount the assembly with variable angle, as its intended puropose is to be mounted to 80x40 aluminium profile, while achieving the…
KN62A DME For Flight Simulator Details in the YouTube Description: https://youtu.be/dYClLvKb3Dk
This is lower enclosure for a model Z30 enigma simulator that was designed by the amazing Arduino Enigma. Sadly whilst he doesn't seem to be making them any more he has posted up the design documentation, bill of materials, software and…
After making and testing a wind simulator for my sim racing rig, I needed a good case to mount the Arduino Nano safely on my rig. I tried to make the case as small as possible, with easy access for 3x PWM fan output and USB-C and 12v DC…
This is a simple housing for the slimme meter simulator van Benefactus.nl - Ben's place . I use this gadget to send fake DSMR telegrams to a homebattery. Using these telegrams I am able to get the battery to do what I want instead of it…
What you need: Arduino UNO M90S 180° Servo motor 2x M3x12mm screw ( allen, hex socket head ) Wunderbaum tree SimHUB software with Motion license or SimTools with DIY license print these models few drop of superglue This is not an original…
Golf Simulator Birdie Tees Added Support to top ring Minor change. All credit to original designer
This is a shotgun based holder for the Vive controller, Specifically made for Clazer: a realistic VR Clay Shooting simulator: https://clazer.club/ I tried other gun based Vive controllers but Clazer needs the controller to be horizontal…
This custom wind simulator mount is specifically designed for the front plate of the SimLab GT1 Evo cockpit . It offers a clean, secure, and compact mounting solution for a dual-fan wind simulation system that responds dynamically to…
16-06-2026 Add V2 of the front and base pieces, to refine how the pegs fit together. Add printable pull-tab labels that can be attached to the ends of the cords to label the muscles 16-05-2026 I turned this model into a full kit you can…
This is my first model and its definitely not perfect, you don't need an MMU/ AMS to print MOST the parts and uses minimal supports. Happy printing! Assembly Instructions: 1 press fit the stars into holds 2 glue the stripes to the to the…
Printer: Creality Ender 3v3 Layer height: 0.08 meters Filament: Comgrow PLA Grams: 1.06
As per the title, this directs air straight toward the intended target for 120mm PC fans, mainly used in wind simulator for sim racing. Screw holes are 105mm apart, should fit most if not all 120mm PC fans with standard screw spacing.…
to be used with a 4 way momentary switch and an arduino pro micro
Thrustmaster Warthog AVA Base direct mounting onto Next Level Racing Flight Simulator Cockpit. Printed on Flashforge A5M using standard PLA. 0.2 layer height 0.4 nozzzle 5 wall loops (2 mm) 15% Cross Hatch infill density 5 bottom shell…
I wanted wider contact points to feel more like my DJI controller. I also added texture to the tips to make it feel more like my DJI controller. The initial design height felt too tall for my hands so I made them in three different…
After seeing this fun idea in action at the FAB25 i tried to get a hold of the original files. I've rebuild the project from sketches. Its a fun way to get use out of your old bed slinger 3d printer and some easy and quick to make parts,…
I didn’t like the stock TCA flap lever — it lacks the normal A320 “lift to move” action, which led to accidental position changes. So I designed a replacement flap lever with a proper pull-to-move mechanism and tactile detents. It feels…
3D printed aircraft simulator instrument. This instrument is made to fit 3x 28BYJ-48 motors. Connect the motors with an Arduino to connect the instrument to your simulator/PC.
Bring the Dymon 4200 Twin Engine experience into your home cockpit with this complete DIY kit. A realistic twin-engine throttle and control module inspired by modern general-aviation aircraft. No electronics knowledge required — just…
Made for IPhone 16 but works with most sizes
Different knob shapes for converting a Behringer X-Touch Mini for flight sim VR use. Use https://dev-tty.nl/X-Touch-Mini-FS2020/ for direct integration to MSFS2020 update: added some more knobs Print Settings Printer Brand: Prusa Printer:…
Supporto per controller Logitech Flight Simulator Yoke. Consente di posizionare una tastiera a basso profilo (5-6mm come Apple Keyboard) sul controller. Le asole per le viti consentono un buon gioco per fissare il supporto con le viti…
This is an original design. It's a little touch, but it's noticeable in flight
This project presents a 3D-printed knee arthroscopy simulator developed for medical education and surgical training. The simulator was designed to provide an accessible, reproducible and low-cost training platform that allows students and…
a monitor mount for the rk1 sim rig needs M12 2PCS, 70mm https://ar.aliexpress.com/item/1005008081039320.html?spm=a2g0o.order_detail.order_detail_item.7.74e0f19c8F03Pa&gatewayAdapt=glo2ara
3D printed aircraft simulator instrument. This instrument is made to fit 2x 28BYJ-48 motors. Connect the motors with an Arduino to connect the instrument to your simulator/PC. The rotating ball and front spacer is made with cuts ment to…
Flight Simulator For the flaps, add this behind the “faceplate - right - bottom - flaps” part https://www.printables.com/model/506564-cessna-172-flaps-panel More info about hardware and software on https://github.com/jpfranca-br/flightsim…
Simple adjustable wall mount rack designed to hold golf bags securely in a vertical position. The mount slides up or down to fit different bag sizes and keeps bags organized against the wall. A string-and-clip option lets you tilt the bag…
General The lorentz transform, time dilation, and length contraction are essential to understand how the universe works and why space and time are actually like two sides of the same coin (spacetime). At the heart of this all it the…
Bring the Dymon 4000 Single Engine experience into your home cockpit with this complete DIY kit. A realistic single-engine throttle and control module inspired by modern general-aviation aircraft. No electronics knowledge required — just…
Next Level Racing F1GT simulator cockpit stiffening kit — designed to reinforce the two legs supporting the wheel plate. I didn’t have a long M8 bolt on hand, so I designed an expansion bolt that works with a wood screw instead. You can…
YOU DON'T HAVE TO BUY PAID VERSION. You can find the free version here: Free Version The only difference between free and paid version is paid version has the original design files (solidworks). So you can tweak it to suit your own needs.…
Better PZB panel for train simulators. I decided to remix the model by Tobias to make the box shorter by not needing to use the complicated mounting setup and using different switches. The switches used are also the ones used by…
Simple, but durable golf tee for use on a grass mat. 10 different heights available: .250" / .500" / .750" / 1.000" / 1.250" / 1.625" / 2.000" / 2.375" / 2.750" / 3.125" Needs to be printed in TPU for durability. No supports required. I…
The Printables version will not be updated. The best place to get it is here: https://captainbobsim.com/product/the-cessna-172-project-files/?customize_changeset_uuid= Find the MobiFlight code under Section 2/Avionics Video guide here…
