Rear Bike Light Seat Post Simulator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rear bike light seat post simulator for attachment to saddlebag
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 318
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
After I installed a saddlebag on my bike there was little room left for my light to affix to the seatpost, and still maintain good visibility in the rear (as the bag obstructs view of light). I made this print to attach to a loop on the saddle bag, thereby providing enhanced visibility of the light, increasing safety.
There is a groove around the body/clip for an optional rubber band. I have not used one and had no problems thus far with the light staying secured.
Print can be made with lesser infill to decrease mass. Also could be shortened if desired. I uploaded fusion 360 (program used) and inventor files to do so.