Rear Bike Light Seat Post Simulator
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.54 – €3.10 net (excluding VAT)
For file: Rear_light_holder_v1 v5_0.15mm_PLA_MK3S_3h22m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.82 excluding VAT (range midpoint).
- Weight reported by the author
- 24 g
- Print time reported by the author
- 3.36 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Rear bike light seat post simulator for attachment to saddlebag
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 27
- Makes
- 0
- Views
- 319
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
After I installed a saddlebag on my bike there was little room left for my light to affix to the seatpost, and still maintain good visibility in the rear (as the bag obstructs view of light). I made this print to attach to a loop on the saddle bag, thereby providing enhanced visibility of the light, increasing safety.
There is a groove around the body/clip for an optional rubber band. I have not used one and had no problems thus far with the light staying secured.
Print can be made with lesser infill to decrease mass. Also could be shortened if desired. I uploaded fusion 360 (program used) and inventor files to do so.